Isolation,cloning, and characterization of the 2S albumin: A new allergen from hazelnut

Scope: 2S albumins are the major allergens involved in severe food allergy to nuts, seeds, and legumes. We aimed to isolate, clone, and express 2S albumin from hazelnut and determine its allergenicity. Methods: 2S albumin from hazelnut extract was purified using size exclusion chromatography and RP‐HPLC. After N‐terminal sequencing, degenerated and poly‐d(T) primers were used to clone the 2S albumin sequence from hazelnut cDNA. After expression in Escherichia coli and affinity purification, IgE reactivity was evaluated by Immunoblot/ImmunoCAP (inhibition) analyses using sera of nut‐allergic patients. Results: N‐terminal sequencing of a ～10 kDa peak from size exclusion chromatography/RP‐HPLC gave two sequences highly homologous to pecan 2S albumin, an 11 amino acid (aa) N‐terminal and a 10aa internal peptide. The obtained clone (441 bp) encoded a 147aa hazelnut 2S albumin consisting of a putative signal peptide (22 aa), a linker peptide (20 aa), and the mature protein sequence (105 aa). The latter was successfully expressed in E. coli. Both recombinant and natural 2S albumin demonstrated similar IgE reactivity in Immunoblot/ImmunoCAP (inhibition) analyses. Conclusion: We confirmed the postulated role of hazelnut 2S albumin as an allergen. The availability of recombinant molecules will allow establishing the importance of hazelnut 2S albumin for hazelnut allergy.     

UV‐Cured Polysiloxane Epoxy Coatings Containing Titanium Dioxide as Photosensitive Semiconductor

UV‐cured polysiloxane epoxy coatings containing titanium dioxide were prepared by means of a cationic photopolymerization process. A good distribution of the inorganic filler was achieved within the polymeric network with an average size dimension of around 500 nm. UV‐vis analysis performed on organic dye (methylene blue) stained coatings showed a high efficiency of the titania photocatalytic activity: a complete degradation of the dye on the coating surface is reached after 60 min of UV irradiation without affecting the matrix photo‐degradation.

     

Investigation of the Sintering of Heterogeneous Powder Systems by Synchrotron Microtomography and Discrete Element Simulation

Collective particle behavior such as interparticle coordination and particle rearrangement plays a significant role in the sintering of heterogeneous powder systems. Those phenomena have been investigated by in situ X-ray microtomography and discrete element simulation (DEM). In situ 3D images of sintering copper-based systems have been obtained at the European Synchrotron Research Facilities. The sintered systems comprise a dense packing of atomized copper powder with a size range of 0–63 μm and the same powder including artificial pores. Quantitative analysis of these images provided valuable data on local strain, coordination number, and particle movement. The sintering of the same systems has been simulated with the discrete element code dp3D. From this set of information, the importance of collective behavior on densification and microstructural evolution is assessed and the relevance of DEM to describe it is discussed.     

Development and characterization of PEEK/carbon nanotube composites

New poly(ether ether ketone) (PEEK) based composites have been fabricated by the incorporation of single-walled carbon nanotubes (SWCNTs) using melt processing. Their structure, morphology, thermal and mechanical properties have been investigated. Scanning electron microscopy observations demonstrated a more uniform distribution of the CNTs for samples prepared following a processing route based on polymer ball milling and CNT dispersion in ethanol media. Thermogravimetric analysis indicated a remarkable improvement in the thermal stability of the matrix by the incorporation of SWCNTs. Differential scanning calorimetry showed a decrease in the crystallization temperature with increasing SWCNT content, whilst no significant changes were observed in the melting of the composites. The crystallite size determined by X-ray diffraction decreased at high SWCNT loading, which is attributed to the spatial limitations on crystal growth by confinement within the CNT network. Dynamic mechanical analysis revealed an increase in the storage moduli, hence in the rigidity of the systems, with increasing SWCNT content. Their addition shifts the glass transition peak to higher temperatures due to the restriction in chain mobility imposed by the CNTs. Higher thermal stability and mechanical strength were found for composites with improved dispersion of the SWCNTs.     

Cathodic protection of carbon steel in natural seawater: Effect of sunlight radiation

Cathodic protection of metals in seawater is known to be influenced by chemical–physical parameters affecting cathodic processes (oxygen discharge, hydrogen evolution and calcareous deposit precipitation). In shallow seawater, these parameters are influenced by sunlight photoperiod and photosynthetic activity. The results presented here represent the first step in studies dedicated to cathodic protection in shallow photic seawater. This paper reports on carbon steel protected at −850 mV vs. Ag/AgCl (oxygen limiting current regime) in the presence of sunlight radiation but in the absence of biological and photosynthetic activity, the role of which deserves future research. Comparison of results obtained by exposing electrochemical cells to daylight cycles in both biologically inactivated natural seawater and in NaCl 3.5 wt.% solutions showed that sunlight affects current densities and that calcareous deposit interfere with light-currents effects. Sunlight radiation and induced heating of the solution have been separated, highlighting results not otherwise obvious: (1) observed current waves concomitant with sunlight radiation depend fundamentally on solar radiation, (2) solar radiation can determine current enhancements from early to late phases of aragonite crystal growth, (3) a three-day-old CaCO₃ layer reduces but does not eliminate the amplitude of the current waves. Theoretical calculations for oxygen limiting currents and additional field tests showed that sunlight, rather than bulk solution heating, is the main cause of daily current enhancements. This was confirmed by polarizations performed at −850 and −1000 mV vs. Ag/AgCl (constant bulk temperature), during which the electrode was irradiated with artificial lighting. This test also confirmed O₂ discharge to be the cathodic process involved. A mechanism of radiation conversion to heat in the oxygen diffusion layer region is proposed.     

Impedance of passive oxide films with graded thickness: Influence of the electrode and cell geometry

The impedance of cylindrical electrodes and of rectangular sheet electrodes coated by passive films with either a constant or a graded thickness has been calculated using a finite element method for solving Laplace's equation. The comparison of different electrode/cell geometries characterized by homogenous (on cylindrical electrodes) or inhomogeneous distributions of primary current (on rectangular sheet electrodes) and by homogeneous or graded thickness has allowed to clarify the origin of frequency dispersion phenomena. Calculated curves were compared with experimental impedance plots obtained with Nb and Ta sheet electrodes and with Nb cylindrical electrodes. The results of the finite element calculations for rectangular sheet electrodes are in better agreement with the experiments than those of a previous analytical calculation developed under a simplifying assumption (i.e. identical local electrolyte resistance at each point of the electrode surface) which was equivalent to neglecting current distribution induced by electrode and cell geometry.     

Seasonal changes and temperature-dependent accumulation of polycyclic aromatic hydrocarbons in high-altitude soils

Polycyclic Aromatic Hydrocarbons (PAHs) are a major group of pollutants whose occurrence in the environment is mainly of anthropogenic origin. In this paper, we examine the effect of topographical slope exposure on PAH contamination and seasonal change in PAH concentrations in soils. We collected soil samples on three dates in 2007 (early May, end of July and beginning of November) from south- and north-facing aspects at 1900 m a.s.l. in the central Italian Alps. We found greater PAH contamination in soils from a north-facing slope than in those from a south-facing slope at all seasons. We calculated North-South Enrichment Factors as the ratio between the concentrations measured in soils from northern and southern aspects. These ratios ranged from 1.4 to 1.9 for lighter PAHs (from 2 to 4 rings). These values are consistent with theoretical calculations based on temperature-specific octanol-air partition coefficients (predicted North-South Enrichment Factors range from 1.6 to 2.0). For heavier PAHs (from 5 to 6 rings), smaller differences were observed between soils from northern and southern aspects, due to the gas/particle distribution of these compounds. We also found consistent differences in normalised PAH concentrations across the three sampling periods. The majority of compounds showed a significant decreasing trend from the beginning of May to the end of July, due to the annual cycles of physical processes (deposition vs. volatilisation) and biological processes (uptake and/or biotransformation). Only a few compounds showed different trends, presumably due to season-specific local emission sources.     

Influence of threshold value in the use of statistical methods for groundwater vulnerability assessment

Statistical techniques can be used in groundwater pollution problems to determine the relationships among observed contamination (impacted wells representing an occurrence of what has to be predicted), environmental factors that may influence it and the potential contamination sources. Determination of a threshold concentration to discriminate between impacted or non impacted wells represents a key issue in the application of these techniques. In this work the effects on groundwater vulnerability assessment by statistical methods due to the use of different threshold values have been evaluated. The study area (Province of Milan, northern Italy) is about 2000 km² and groundwater nitrate concentration is constantly monitored by a net of about 300 wells. Along with different predictor factors three different threshold values of nitrate concentration have been considered to perform the vulnerability assessment of the shallow unconfined aquifer. The likelihood ratio model has been chosen to analyze the spatial distribution of the vulnerable areas. The reliability of the three final vulnerability maps has been tested showing that all maps identify a general positive trend relating mean nitrate concentration in the wells and vulnerability classes the same wells belong to. Then using the kappa coefficient the influence of the different threshold values has been evaluated comparing the spatial distribution of the resulting vulnerability classes in each map. The use of different threshold does not determine different vulnerability assessment if results are analyzed on a broad scale, even if the smaller threshold value gives the poorest performance in terms of reliability. On the contrary, the spatial distribution of a detailed vulnerability assessment is strongly influenced by the selected threshold used to identify the occurrences, suggesting that there is a strong relationship among the number of identified occurrences, the scale of the maps representing the predictor factors and the model efficiency in discriminating different vulnerable areas.     

Experimental evaluation of the growth rate of mould on finishes for indoor housing environments: Effects of the 2002/91/EC directive

We report the results of a study to evaluate the growth rate of three species of mould on plasters, finishes and paints typically used in structures with heavy weight building envelopes. The aim was to determine the influence of the chemical composition (in terms of organic fraction of the materials) on the growth rate of moulds. The study was carried out in the following steps: – characterization of materials; – inoculation of mould spores (3 species) on 7 types of material (2 plasters, 3 finishes, 2 paints); – growth in a climatic chamber (23 °C and 90% RH); – analysis of the mould growth rate using various experimental techniques (fluorescence microscopy analysis, thermogravimetric analysis, etc.). Results show a clear correlation between the organic substances contained in paints, plasters and finishes and the growth rate of the mould.