Organochlorine pesticides in colostrums in case of normal and preterm labor (IASI, Romania)

Assessment of organochlorine pesticides (OCPs) in human body is important for human health because they have weak estrogenic or antiestrogenic effects and are considered endocrine disrupters. We used colostrum of women as indicator for levels of OCPs in human body for mothers with normal and preterm labor from eastern part of Romania. Sixty- three samples of colostrum were extracted by solid-phase extraction. Analyses were carried out using gas chromatography coupled to mass spectrometry (GC-MS). OCPs have been detected in all samples, with p,p’-dichlorodiphenyldichloroethylene (p,p’-DDE) and γ-hexachlorocyclohexane (γ-HCH) being at the highest concentrations. Of the organochlorines measured in clostrum samples from women in preterm labor, median levels of DDTs (470 ng/g) and HCHs (99 ng/g) were higher than for the same compounds from women in normal labor (median of DDTs = 268 ng/g and median of HCHs = 96 ng/g). Normal labor had higher median concentrations of HCB (19.5 ng/g) versus preterm labor (14 ng/g). Statistical data show high Spearman correlation coefficients between various OCPs. We found a good correlation between α-, γ-, β- and δ- HCH isomers (p < 0.001) for both normal and preterm labor. The most abundant target compound was p,p’-DDE (median value 96 ng/g, and 137 ng/g for mother with normal and preterm labor, respectively) in all colostrum samples. The estimated daily intakes of HCHs by infants exceeded corresponding Health Canada guidelines.     

Does remediation save lives? — On the cost of cleaning up arsenic-contaminated sites in Sweden

Sweden has only just begun remediation of its many contaminated sites, a process that will cost an estimated SEK 60,000 million (USD 9100 million). Although the risk assessment method, carried out by the Swedish EPA, is driven by health effects, it does not consider actual exposure. Instead, the sites are assessed based on divergence from guideline values. This paper uses an environmental medicine approach that takes exposure into account to analyse how cancer risks on and near arsenic-contaminated sites are implicitly valued in the remediation process. The results show that the level of ambition is high. At 23 contaminated sites, the cost per life saved varies from SEK 287 million to SEK 1,835,000 million, despite conservative calculations that in fact probably underestimate the costs. It is concluded that if environmental health risks are to be reduced, there are probably other areas where economic resources can be used more cost-effectively.     

Incorporating amylopectin in poly(lactic acid) by melt blending using poly(ethylene‐co‐vinyl alcohol) as a thermoplastic carrier. (I) morphological characterization

In this study, the possibility of using a biodegradable grade of thermoplastic poly(ethylene‐co‐vinyl alcohol) with high (71 mol %) vinyl alcohol (EVOH‐29), as a carrier to incorporate the renewable and biodegradable component amylopectin (AP) into poly(lactic acid) (PLA) through melt blending, was investigated. The effect of using a plasticizer/compatibilizer (glycerol) in the blend systems was also investigated. In a first step, the EVOH/AP blends were produced and thereafter, in a second step, these were mixed with PLA. In this first study, the blend morphology was investigated using optical microscopy, scanning electron microscopy and Raman imaging spectroscopy and the thermal properties were measured by differential scanning calorimetry. Despite the fact that EVOH and AP are both highly polar, their blends were immiscible. Still, the blends exhibited an excellent phase dispersion on a micron level, which was enhanced further by the addition of glycerol. A good phase dispersion was finally observed by incorporation of the latter blends in the PLA matrix, suggesting that the proposed blending route can be successfully applied for these systems. Finally, the Differential scanning calorimetry (DSC) data showed that the melting point of EVOH dropped in the EVOH/AP blends, but the properties of the PLA phase was still relatively unaffected as a result of blending with the above components. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Development of a new procedure for precise determination of viral aerosol lethal dose (ALD50) for birds

This paper describes a new method for precise determination of viral aerosol lethal dose (ALD₅₀) and reports the results obtained for birds exposed by H5N1 Avian influenza A strain under controlled laboratory conditions. The reported method utilizes our recently developed personal bioaerosol sampler capable of monitoring viable virus concentration in the ambient air. Up to six laboratory animals could be located in a specially designed aerosol chamber and exposed in parallel by an airborne strain of interest to generate the amount of data sufficient for representative statistical analysis. A concentration of viable airborne virus was measured by the personal aerosol samplers directly in the breathing zone of each particular bird. The results show a very low inter-sampler variation used for each particular run, which was confirmed by a single factor ANOVA test undertaken for all six personal samplers involved in each experiment. As was shown, the difference in amount of viruses collected by all samplers during each particular run was not statistically significant. It was found that the ALD₅₀ for approximately 400-g birds exposed to H5N1 Avian influenza A strain A/Chicken/Suzdalka/Nov-11/2005 was around 26.5 FFU (focus forming units).     

Effect of primary amine hydrocarbon chain length for the selective catalytic reduction of NOx from diesel engine exhaust

The effect of increasing primary amine hydrocarbon chain length on the SCR of NO_x from diesel engine exhaust was investigated and compared to ammonia. Methylamine (CH₃NH₂), ethylamine (CH₃CH₂NH₂), propylamine (CH₃CH₂CH₂NH₂) and butylamine (CH₃CH₂CH₂CH₂NH₂) were tested using a 12 cell mini core NH₃ - SCR catalyst cut from a 400 cpsi block. There is a steady decrease in NO_x conversion as the length of the hydrocarbon chain increases (from 50% for methylamine to 26% for butylamine). For the same number of carbons in the amine, primary amines are more active reductants than methyl substituted secondary or tertiary amines. For example, ethylamine (NO_x conversion of 45%) is more active than dimethylamine (NO_x conversion of 34%).Since the amines are reactive in the gas phase in the temperature range of diesel engine exhaust, gas phase conversions were estimated by replacing the mini core SCR catalyst with an equivalent length of quartz beads. There was no smooth transition in gas phase NO and NO_x conversions with increasing hydrocarbon chain length. The results suggest a different mechanism for gas phase reactions depending on the nature of the amine.     

Viscoelastic properties of latex paint films in tension: Influence of the inorganic phase and surfactants

The tensile properties of latex coatings were investigated with a set of custom formulated artist-type paints at an age of 1 year. All films in the study contained a poly(methyl methacrylate-cobutyl acrylate) binder exhibiting a glass-transition at approximately 10 °C. The viscoelastic behaviour of the latex matrix is first highlighted through a series of experiments involving different strain histories and temperatures. Influence of the inorganic particle concentration and geometry is then illustrated using TiO₂ and calcined kaolin for the secondary phase. Experimental data from a wide range of conditions are summarised through master curves of secant modulus and failure strains using time–temperature superposition. The results indicate that the latex films behave in a rheologically simple manner and it is possible to predict the response outside of the experimental time-scale. An analysis by similar methods is also given for TiO₂ pigmented films with/without surfactant removed by immersion in water. Differential scanning calorimetry and atomic force microscopy were also used in conjunction with mechanical tests. The combined findings suggest that a fraction of surfactant migrates to the TiO₂ interface during film formation, where it interferes with adhesion of the acrylic matrix.     

Gravitational drainage of compressible organic materials

A model was developed to simulate drainage of compressible particle suspensions, and study how cake compression and volumetric load influence the process. The input parameters were settling velocity, cake resistance and compressibility. These parameters were found using a new experimental method. Dextran‐MnO₂ particle suspensions were drained as these resemble organic waste slurries with respect to settling and compressibility. It was demonstrated that cake compressibility must be taken into account to obtain adequate simulations. This implies that pressurized filtration resistances cannot be used for drainage simulations. In the filtration step, a distinct increase of dry matter from top to bottom of the cake was observed. During the subsequent consolidation, the cake compressed and a uniform dry matter profile was found. The final dry matter content of the cake increased with feed concentration and volumetric load. The drainage time increased proportionally with feed concentration and, more importantly, proportionally with squared volumetric load. © 2010 American Institute of Chemical Engineers AIChE J, 2010     

Nutritional Value of Seven Freshwater Fish Species From the Brazilian Pantanal

This study determined the proximate composition and fatty acid profile of the lipid fraction in muscle tissue (fillet) of seven fish species from the Miranda River, Brazil. Total lipid content had the largest coefficient of variation among species (73%), while protein content had the smallest (4.5%), allowing Pimelodus argenteus (mandi-prateado) to be categorized as lean fish; Pimelodus maculatus (mandi-amarelo), Hemisorubim platyrhynchos (jurupoca), and Pinirampus pirinampu (barbado) as species with medium fat content, and Paulicea luetkeni (jaú) and Surubim lima (jurupensém) as fatty fish. In all the species investigated, palmitic acid (23.76–25.99%) was the predominant saturated fatty acid. Oleic acid (16.09–32.90%) was the most abundant monounsaturated fatty acid. Total omega-6 polyunsaturated fatty acids (5.99–15.56%) were the predominant polyunsaturated fatty acids, except in Ageneiosus brevifilis (palmito), in which total omega-3 polyunsaturated fatty acids predominated (10.30%). All the species had favorable indices of nutritional quality for total lipids, with respect to human consumption.     

Determination of Deep Frying Soybean Oil Disposal Point by a Sensory Method

Measurements of degradation in frying oils are mainly based on physico-chemical properties. Total polar compounds (TPC) and free fatty acids (FFA) content in frying oils are used as a guide for discarding used oils. The purpose of this study was to evaluate the efficacy of a sensory method in detecting degradation in soybean oils used in potato chips deep frying. The sensory evaluation of oil samples was determined by a trained panel; after rigorous selection and training steps. Free fatty acid, TPC and Rancimat induction period (IP) were quantified in the same samples. The proposed sensory method was sensitive to small differences in rancidity. The selected and trained sensory panel discarded oil samples with 0.175% FFA as oleic acid, 18.92% TPC, and 0.20 h IP. According to the results achieved in this research sensorial trained panel response is sensitive and accurate in refusing deteriorated frying oils. Besides this, soybean oil can be used for deep frying procedures and safely discarded according to the panel response, although presenting up to 7% linolenic acid.     

Analysis of regeneration of sterically hindered alkanolamines aqueous solutions with and without activator

This work concerns the comparison of the regeneration capability of different single sterically hindered alkanolamines (SHA: AMP, AEPD, AMPD, AHPD) or Pz-activated aqueous solutions with that of single MEA aqueous solution. It was found that AEPD, AMPD and AHPD offer an easier and faster regeneration than conventional alkanolamines (MEA). Small additions of Pz to single AHPD aqueous solutions were found to have a beneficial influence on the desorption performance.