Comparison of the Determination of Eight Cholesterol Oxides in Dry�CCured Shoulder by GC�CFID, GC�CMS, and GC Tandem Mass Spectrometry

The analysis of eight cholesterol oxidation products: 7α–hydroxycholesterol, 7β–hydroxycholesterol, α–epoxycholesterol, β–epoxycholesterol, 20α–hydroxycholesterol, cholestanetriol, 25–hydroxycholesterol, and 7–ketocholesterol in dry–cured shoulder was carried out. The extraction of lipids was performed by using the Bligh and Dyer method (1959). Interferences were removed by solid-phase extraction (SPE) in two steps with silica and aminipropylsilica SPE columns. The separation of the eight cholesterol oxidation products was done by gas chromatography, and the detection was performed by flame ionization detection (FID) and mass spectrometry (MS). The results obtained from the use of both systems of detection were compared. The results showed that gas chromatography-mass spectrometry (GC–MS) was the most suitable technique to obtain reliable quantitative data, and significant differences (p < 0.05) between FID and MS determining 7α–hydroxycholesterol, 20α–hydroxycholesterol, and 25–hydroxycholesterol were observed. For the determination of cholesterol oxidation products, it was necessary to apply gas chromatography-tandem mass spectrometry to increase the sensitivity and to avoid interference from other compounds.     

Natural and human forcing in recent geomorphic change; case studies in the Rio de la Plata basin

An analysis of geomorphic system's response to change in human and natural drivers in some areas within the Río de la Plata basin is presented. The aim is to determine whether an acceleration of geomorphic processes has taken place in recent years and, if so, to what extent it is due to natural (climate) or human (land-use) drivers. Study areas of different size, socio-economic and geomorphic conditions have been selected: the Río de la Plata estuary and three sub-basins within its watershed. Sediment cores were extracted and dated (²¹⁰Pb) to determine sedimentation rates since the end of the 19th century. Rates were compared with time series on rainfall as well as human drivers such as population, GDP, livestock load, crop area, energy consumption or cement consumption, all of them related to human capacity to disturb land surface. Data on river discharge were also gathered. Results obtained indicate that sedimentation rates during the last century have remained essentially constant in a remote Andean basin, whereas they show important increases in the other two, particularly one located by the São Paulo metropolitan area. Rates in the estuary are somewhere in between. It appears that there is an intensification of denudation/sedimentation processes within the basin.Rainfall remained stable or varied very slightly during the period analysed and does not seem to explain increases of sedimentation rates observed. Human drivers, particularly those more directly related to capacity to disturb land surface (GDP, energy or cement consumption) show variations that suggest human forcing is a more likely explanation for the observed change in geomorphic processes. It appears that a marked increase in denudation, of a “technological” nature, is taking place in this basin and leading to an acceleration of sediment supply. This is coherent with similar increases observed in other regions.     

Thermoacoustic Emission from Carbon Nanotubes Imaged by Atomic Force Microscopy

The thermoacoustic effect of isolated single‐wall carbon nanotubes aligned between electrodes is experimentally observed for the first time by imaging the emitted acoustic wave using an atomic force microscopy‐based technique specifically developed for the task. The capability of such a technique for single‐point thermoacoustic measurements is first verified on carbon nanotubes layers with two electrodes for injecting alternate electric current. The technique is then demonstrated to allow the acquisition, simultaneously with the topography, of images reflecting the pressure of the acoustic wave at fixed distance from the sample. Such a capability is used to collect images reflecting the amplitude of acoustic waves generated by isolated nanotubes and nanotube bundles by the thermoacoustic effect.     

Nanocasting of Mesoporous In‐TM (TM = Co,Fe, Mn) Oxides: Towards 3D Diluted‐Oxide Magnetic Semiconductor Architectures

Transition metal (Co, Fe, Mn)‐doped In₂O_3?y mesoporous oxides are synthesized by nanocasting using mesoporous silica as hard templates. 3D ordered mesoporous replicas are obtained after silica removal in the case of the In‐Co and In‐Fe oxide powders. During the conversion of metal nitrates into the target mixed oxides, Co, Fe, and Mn ions enter the lattice of the In₂O₃ bixbyite phase via isovalent or heterovalent cation substitution, leading to a reduction in the cell parameter. In turn, non‐negligible amounts of oxygen vacancies are also present, as evidenced from Rietveld refinements of the X‐ray diffraction patterns. In addition to (In_1?xTM_x)₂O_3?y, minor amounts of Co₃O₄, α‐Fe₂O₃, and Mn_xO_y phases are also detected, which originate from the remaining TM cations not forming part of the bixbyite lattice. The resulting TM‐doped In₂O_3?y mesoporous materials show a ferromagnetic response at room temperature, superimposed on a paramagnetic background. Conversely, undoped In₂O_3?y exhibits a mixed diamagnetic‐ferromagnetic behavior with much smaller magnetization. The influence of the oxygen vacancies and the doping elements on the magnetic properties of these materials is discussed. Due to their 3D mesostructural geometrical arrangement and their room‐temperature ferromagnetic behavior, mesoporous oxide‐diluted magnetic semiconductors may become smart materials for the implementation of advanced components in spintronic nanodevices.     

Reversible Amorphous‐to‐Amorphous Transitions in Chalcogenide Films: Correlating Changes in Structure and Optical Properties

Structural transitions in materials are accompanied by appreciable and exploitable changes in physical‐chemical properties. Whereas reversible optically‐driven atomistic changes in crystal‐to‐amorphous transitions are generally known and exploited in applications, the nature of the corresponding polyamorphic transitions between two structurally distinct meta‐stable amorphous phases is an unexplored theme. Direct experimental evidence is reported for the nature of the atomistic changes during fully reversible amorphous‐to‐amorphous switching between two individual states in the non‐crystalline As₅₀Se₅₀ films prepared by pulsed‐laser deposition and consequent changes in optical properties. Combination of surface sensitive X‐ray photoelectron spectroscopy and spectroscopic ellipsometry show that the near‐bandgap energy illumination and annealing induce reversible switching in the material's structure by local bonding rearrangements. This is accompanied by switching in refractive index between two well‐defined states. Exploiting the pluralism of distinct structural states in a disordered solid can provide new insights into the data storage in emerging optical memory and photonic applications.     

Wild melon: a novel non-edible feedstock for bioenergy

In the present research work, a non-edible oil source Cucumis melo var. agrestis(wild melon) was systematically identified and studied for biodiesel production and its characterization. The extracted oil was 29.1% of total dry seed weight. The free fatty acid value of the oil was found to be 0.64%, and the single-step alkaline transesterification method was used for conversion of fatty acids into their respective methyl esters. The maximum conversion efficiency of fatty acids was obtained at 0.4 wt% Na OH(used as catalyst), 30%(methanol to oil, v/v) methanol amount, 60 ℃ reaction temperature,600-rpm agitation rate and 60-min reaction time. Under these optimal conditions, the conversion efficiency of fatty acid was 92%. However, in the case of KOH as catalyst, the highest conversion(85%) of fatty acids was obtained at 40%methanol to oil ratio, 1.28 wt% KOH, 60 ℃ reaction temperature, 600-rpm agitation rate and 45 min of reaction time.Qualitatively, biodiesel was characterized through Fourier transform infrared spectroscopy(FTIR) and gas chromatography and mass spectroscopy(GC–MS). FTIR results demonstrated a strong peak at 1742 cm~(-1), showing carbonyl groups(C=O)of methyl esters. However, GC–MS results showed the presence of twelve methyl esters comprised of lauric acid, myristic acid, palmitic acid, non-decanoic acid, hexadecanoic acid, octadecadienoic acid and octadecynoic acid. The fuel properties were found to fall within the range recommended by the international biodiesel standard, i.e., American Society of Testing Materials(ASTM): flash point of 91 ℃, density of 0.873 kg/L, viscosity of 5.35 c St, pour point of-13 ℃, cloud point of-10 ℃, total acid number of 0.242 mg KOH/g and sulfur content of 0.0043 wt%. The present work concluded the potential of wild melon seed oil as excellent non-edible source of bioenergy.     

Solvent‐Mediated Plasmon Tuning in a Gold‐Nanoparticle–Poly(Ionic Liquid) Composite

The design, synthesis, and characterization of a hierarchically ordered composite whose structure and optical properties can be reversibly switched by adjustment of solvent conditions are described. Solvent‐induced swelling and de‐swelling is shown to provide control over the internal packing arrangement and hence, optical properties of in situ synthesized metal nanoparticles. Specifically, a gold‐nanoparticle‐containing ionic‐liquid‐derived polymer is synthesized in a single step by UV irradiation of a metal‐ion‐precursor‐doped, self‐assembled ionic liquid gel, 1‐decyl‐3‐vinylimidazolium chloride. Small‐angle X‐ray scattering (SAXS) studies indicate that in the de‐swollen state, the freestanding polymer adopts a perforated lamellar structure. Optical spectroscopy of the dried composite reveals plasmon resonances positioned in the near‐IR. Strong particle–particle interactions arise from matrix‐promoted formation of aggregated 1D clusters or chains of gold nanoparticles. Upon swelling in alcohol, the composite undergoes a structural conversion to a disordered structure, which is accompanied by a color change from purple to pale pink and a shift in the surface plasmon resonance to 527 nm, consistent with isolated, non‐interacting particles. These results demonstrate the far‐field tuning of the plasmonic spectrum of gold nanoparticles by solvent‐mediated changes in its encapsulating matrix, offering a straightforward, low‐cost strategy for the fabrication of nanophotonic materials.     

The EuQoS system: a solution for QoS routing in heterogeneous networks [Quality of Service based Routing Algorithms for Heterogeneous Networks]

EuQoS is the acronym for "end-to-end quality of service support over heterogeneous networks", which is a European research project aimed at building an entire QoS framework, addressing all the relevant network layers, protocols, and technologies. This framework, which includes the most common access networks (xDSL, UMTS, WiFi, and LAN) is being prototyped and tested in a multidomain scenario throughout Europe, composing what we call the EuQoS system. In this article we present the novel QoS routing mechanisms that are being developed and evaluated in the framework of this project. The preliminary performance results validate the design choices of the EuQoS system, and confirm the potential impact this project is likely to have in the near future