SSRF储存环预研制铝合金真空室的机械加工

上海同步辐射装置（SSRF）储存环铝合金超高真空室已研制成功，该机加真空室的尺寸大、尺寸精度、形位公差及粗糙度要求极高，不同于常规的大型超高真空室。在预研件加工中，成功地解决了一系列问题，如光洁度提高困难，加工成型后变形大；加工尺寸和精度受环境温度影响较大等。本文详细阐述了储存环真空室材料和热处理状态的选择依据，为了保证尺寸精度和形位公差所采取的工艺措施，分析了粗糙度的形成机理和影响因素，从刀具材料、几何角度、切削参数、冷却液选型等多方面提出了解决办法。     

一种新型2×2 S0I热光开关

设计并制作了一种新型的SOI 2×2马赫一曾德（MZ）热光开关。这种光开关采用了深刻蚀结构的配对多模干涉耦合器，同时，为了保证单模传输和调制，在连接波导和调制臂区域采用了浅刻蚀结构。深刻蚀结构增强了多模干涉耦合器对光场的限制，有利于自映像质量的提高，从而减少了自映像损耗和不均衡度，同时也提高了制作容差。基于强限制配对干涉耦合器的新型热光开关，其插入损耗为-11．0dB，其中包括光纤波导耦合损耗4．3dB，上升和下降开关时间分别为3．5μs和8．8μs。     

EILog-05成套测井装备在长庆油田的应用

EILog-05成套测井装备是中国石油集团测井有限公司研发的具有完全自主知识产权的集成测井系统。集成化设计提高了测井仪器性能,综合化设计实现了地面系统网络化,成像测井仪器的配接成功丰富了测井项目,配套使用的一体化LEAD处理解释软件能更好地实现测井资料的现场综合解释。20井次现场试验、与ECLIPS-5700测井系统5口井的对比试验以及累计300多井次的现场应用表明,EILog-05成套测井装备的可靠性、稳定性、重复性以及与国外同类仪器测井结果的一致性均满足油田生产需要,能很好地判断长庆油田的“三低一高”复杂地层,对认识岩石三性关系和评价油气显示具有重要的作用。     

包含热模型的大功率MOSFET新型电路模型

功率转换器的功率密度越来越高，发热问题越来越严重，这种功率转换器的设计对现代大功率半导体技术提出了新的挑战；因而，热问题的优化设计和核实变得比大功率器件的电模型更加重要，本文提出一种新的PSPICE模型，可以利用它计算MOSFET芯片在瞬变过程中的温度。其中的热阻可以从制造商提供的产品使用说明书得到。本文介绍的模型提供发热和电气参数之间的动态关系。它建立了与许可的热环境的关系，例如，栅极驱动电路、负载、以及散热器的分析与优化设计。利用这个模型可以改善散热器的设计。由于决定功率损耗的参数是分布在一定范围内，受生产制造的影响很大，因而散热器的设计往往由于无法预先知道功率损耗而无法进行。     

Location and calculation-free node-scheduling schemes in large wireless sensor networks

In wireless sensor networks that consist of a large number of low-power, short-lived, unreliable sensors, one of the main design challenges is to obtain long system lifetime without sacrificing system original performance (sensing coverage and sensing reliability). To solve this problem, one of the potential approaches is to identify redundant nodes at the sensing interface and then assign them an off-duty operation mode that has lower energy consumption than the normal on-duty mode. In our previous work [J. Wireless Commun. Mobile Comput. 3 (2003) 271; Processing of ACM Wireless Sensor Network and Application Workshop 2002, September 2002], we proposed a node-scheduling scheme, which can provide a 100% sensing coverage preservation capability. This, however, requires each node to be aware of its own and its neighbors’ location information. Also, in that scheme, each node has to do accurate geometrical calculation to determine whether to take an off-duty status. In this paper, we propose and study several alternative node-scheduling schemes, which cannot completely preserve the original system coverage, but are nonetheless light-weighted and flexible compared with the previous one. Our simulation results compare these schemes with the previous one and demonstrate their effectiveness.     

A QoS index for IP services to effectively support usage-based charging

The goal of this letter is to present a model to compute a quality-of-service (QoS) index to characterize IP services. Then, we show how such a score may be used in a clear and flexible way for defining advanced usage-based tariff criteria to charge QoS guaranteed network services to address the dynamics of the expected future telecommunications scenario.     

The novel inotropic agent CGP 48506 alters force primarily by Ca(2+)-independent mechanisms in porcine skinned trabeculae

OBJECTIVES: The aim was to determine whether, and by what mechanism(s), a novel inotropic agent 5-methyl-6-phenyl-1,3,5,6-tetrahydro-3, 6-methano-1,5-benzodiazocine-2,4-dione (BA 41899) and its enantiomers directly alter the Ca2+ sensitivity of cardiac myofilaments. METHODS: Porcine ventricular trabeculae were permeabilised with Triton X-100. The relationship between force and pCa (-log[Ca2+]) was determined in the presence and absence of ATP. Troponin I was extracted, using vanadate, to produce unregulated maximally activated myofilaments. Force and actomyosin ATPase activity were measured simultaneously to determine tension cost (ATPase activity/tension). The effects of the (+) enantiomer (CGP 48506) on the twitch of intact muscle were demonstrated using rat papillary muscle. RESULTS: 100 microM BA 41899 had a pronounced Ca2+ sensitising effect on force production by porcine skinned cardiac fibres, increasing the pCa required for 50% maximal activation by 0.64 units, while suppressing maximum force by 18.3%. Resting tension was unaffected. These actions were primarily caused by CGP 48506 and were concentration dependent. At concentrations less than 100 microM, CGP 48506 also increased twitch amplitude in intact papillary muscles with no effect on resting tension, whereas 100 microM CGP 48506 increased resting force due to a slowing of relaxation. 100 microM CGP 48506 potentiated Ca(2+)-independent rigor tension in skinned trabeculae, indicating a Ca2+ sensitising mechanism unrelated to Ca2+ binding to troponin C. Tension cost was unaffected by 100 microM CGP 48506 over the entire range of activating Ca2+ concentrations. Suppression of maximum force by CGP 48506 was independent of both Ca2+ concentration and the regulatory troponin complex. CONCLUSIONS: Both the increase in Ca2+ sensitivity during submaximal activation and the depression of maximum force which are induced by CGP 48506 in skinned trabeculae occur at least partly through Ca(2+)-independent mechanisms.     

Morphological variations of the human gastric mucosa after omeprazole treatment: a scanning electron microscopic study

The effects of antiepileptic drugs on cognitive function in 48 healthy volunteers were assessed using event-related potentials (ERP) and the Attention Index included in the Wechsler Memory Scale, revised edition (WMS-R). The study was conducted over 1 week, using a double-blind design. Four drugs, carbamazepine (CBZ), phenytoin (PHT), valproate (VPA) and zonisamide (ZNS) were tested. Using an auditory oddball task, ERP measurements were made under two conditions with different tone intensities: Condition 1 used 70 db SPL; and Condition 2 used 30 db SPL. Results showed that CBZ prolonged target N1 and P3 latencies in Condition 1, and reduced frequent N1 amplitude in Condition 2, which suggests that CBZ may cause a change in sensory memory and prolong stimulus evaluation time. It is suggested that under a low stimulus intensity level, the sensory function itself was affected. Phenytoin was found to prolong target N1 latency in Condition 2, which also indicates a change in the sensory memory function. However, VPA did not significantly affect ERP components, except for the shortened frequent N1 latency, which could not be explained due to the limited information. It was found that ZNS augmented P3 amplitude in Condition 2, and reduced scores on the Attention Index. It is suggested that the augmentation of P3 amplitude was caused by the reduction of processing negativity as a result of the detrimental effect of ZNS on subjects' attention. However, the apparent difference between the ERP and behavioral indices suggests that caution should be exercised in assessing the results obtained only from ERP measurements.     

Assessment of the influence of the compliant aortic root on aortic valve mechanics by means of a geometrical model

In recent years several researchers have suggested that the changes in the geometry and angular dimensions of the aortic root which occur during the cardiac cycle are functional to the optimisation of aortic valve function, both in terms of diminishing leaflet stresses and of fluid-dynamic behaviour. The paper presents an analytical parametric model of the aortic valve which includes the aortic root movement. The indexes used to evaluate the valve behaviour are the circumferential membrane stress and the stress at the free edge of the leaflet, the index of bending strain, the bending of the leaflet at the line attachment in the radial and circumferential directions and the shape of the conduit formed by the leaflets during systole. In order to evaluate the role of geometric changes in valve performance, two control cases were considered, with different reference geometric configuration, where the movement of the aortic root was ignored. The results obtained appear consistent with physiological data, especially with regard to the late diastolic phase and the early ejection phase, and put in evidence the role of the aortic root movement in the improvement of valve behaviour.