Influence of Processing Parameters on the Sintering and Electrical Properties of Pb(Zn1/3Nb2/3)O3-Based Ceramics

Pb(Zn_1/3Nb_2/3)O₃-based ceramics have been prepared by two different processing methods: conventional (PZN-C) and reaction-sintering (PZN-RS). The conventionally prepared PZN-based ceramics densified at lower temperatures (950°C) than the reaction-sintered samples (1100°C), but the perovskite/pyrochlore ratio was always higher in PZN-RS. The presence of a substantial amount of pyrochlore phase in PZN-C ceramics caused a decrease in the electrical properties. The maximum dielectric constant values in PZN-C ceramics were 10%–15% lower than those of PZN-RS, despite a similar average grain size, 7 ± 0.2 μm. The temperature of the maximum of the dielectric constant ( T _max) was lower than that expected from the mixing rule because of the possible formation of Ba–Nb clusters. The higher chemical homogeneity in PZN-RS ceramics is the main reason for the higher dielectric constant, T _max and electromechanical response, as well as for the lower difference between T _max and the depolarization temperature ( T _d) and the lower diffusiveness parameter (δ).     

Identification of novel pyranoanthocyanins in berry juices

In most fruit and berry products the attractive red color is unstable and easily susceptible to degradation. The colors of strawberry and raspberry juices can be enhanced and stabilized by the addition of cinnamic acids. The aim of this study was to identify the novel anthocyanin products responsible for the improved juice color. The pyranoanthocyanins formed were detected using high-performance liquid chromatography, and the fractions from this were analyzed using a nano-ESI tandem MS technique. The pyranoanthocyanins identified were formed from reactions of the main anthocyanins of strawberry and raspberry juices with ferulic acid or sinapic acid. The new anthocyanin derivatives were the 4-vinylguaiacol and 4-vinylsyringol adducts of pelargonidin and cyanidin. This is the first time that pelargonidin 3-glucoside-based vinylphenol pyranoanthocyanins and pyranoanthocyanins with more complex sugar residues have been found. This is also the first time pyranoanthocyanins have been detected in strawberry and raspberry juices.     

3rd Ceramic Leadership Summit

The Ceramic Leadership Summit is designed to explore business opportunities, emerging technologies, and critical issues that challenge the ceramic and glass materials community. In 2012, the 3rd Ceramic Leadership Summit was held in conjunction with the 4th International Congress on Ceramics (ICC4). The one‐day program focused on technology transfer, entrepreneurship, and product innovation. Important topics discussed included strategies for creating and sustaining a small business, intellectual property protection, technology transfer, and mechanisms for government–university–industry partnerships. International speakers in the case study session addressed these topics from the perspective of their local and national policies and practices. Several of the case study presentations highlighted the use of “waste materials” in the creation and application of new technologies and products.     

Nanohybrid Materials with Tunable Birefringence via Cation Exchange in Polymer Films

In this work, a nanohybrid material based on a freestanding polymeric liquid crystal network capable of postmodification via cation exchange to tune birefringence is proposed. The smectic liquid crystal films can be infiltrated with a variety of cations, thereby changing the refractive indices (n_e and n_o) and the effective birefringence (Δn) of the nanohybrid material, with reversible cation infiltration occurring within minutes. Birefringence could be tuned between values of 0.06 and 0.19, depending on the cation infiltrated into the network. Upon infiltration, a decrease in the smectic layer spacing is found with layer contraction independent of the induced change in birefringence. Potential applications are in the field of specialty optical devices, such as flexible, retunable reflective filters.     

Writing with Fluid: Structuring Hydrogels with Micrometer Precision by AFM in Combination with Nanofluidics

Hydrogels have many applications in biomedical surface modification and tissue engineering. However, the structuring of hydrogels after their formation represents still a major challenge, in particular due to their softness. Here, a novel approach is presented that is based on the combination of atomic force microscopy (AFM) and nanofluidics, also referred to as FluidFM technology. Its applicability is demonstrated for supramolecular hydrogel films that are prepared from low‐molecular weight hydrogelators, such as derivates of 1,3,5‐benzene tricarboxamides (BTAs). BTA films can be dissolved selectively by ejecting alkaline solution through the aperture of a hollow AFM‐cantilever connected to a nanofluidic controller. The AFM‐based force control is essential in preventing mechanical destruction of the hydrogels. The resulting “chemical writing” process is studied in detail and the influence of various parameters, such as applied pressure and time, is validated. It is demonstrated that the achievable structuring precision is primarily limited by diffusion and the aperture dimensions. Recently, various additive techniques have been presented to pattern hydrogels. The here‐presented subtractive approach can not only be applied to structure hydrogels from the large class of reversibly formed gels with superior resolution but would also allow for the selective loading of the hydrogels with active substances or nanoparticles.     

Performance Evaluation of Packet Mobile Communications through Level Crossing Analysis

In this paper the performance of a packet mobile radio network is studied inthe presence of shadow fading outage intervals.Under quite general assumptions for the medium access protocol,the probability mass function of the sequence of packets that may be lostdue to an outage interval is derived. It is seen that long sequences of lostpackets are likely to occur for typical values of the mobile speed andshadowing correlation parameters.For delay constrained sources, e.g., voice, the analysis is mainly focused atderiving the probability function of the sequence of dropped packetsand the probability of dropping. For data sources, the delay statistic isalso derived. In the latter case, the effect of finite buffer length isaddressed. Simulation is used to verify the accuracy of approximations introduced in the analysis.     

Recent trends for the employment of jumbo squid (Dosidicus gigas) by-products as a source of bioactive compounds with nutritional,functional and preservative applications: a review

Only 50%–60% of total seafood catch is used for human consumption, seafood processing being considered as one of the main sources of by-products. Among marine species, jumbo squid (JS; Dosidicus gigas) represents the most important squid fishery, showing an increasing economic interest in many countries. As for any other marine species, the regular cleaning, dressing and processing produce high quantities of by-products (skin, head, fins, viscera, tentacles, unclaimed mantle, etc.) that are rich in many nutrients (proteins, lipids, minerals, vitamins, enzymes, biopolymers, etc.). This review compiles information about extraction and employment of JS by-products with the aim of enhancing their economic value and reduce environmental drawbacks. A special emphasis is given to the relevance in developing methods susceptible to transform by-products into useful and profitable products susceptible to be applied in several industries such as food, medicine, agrochemical or pharmaceutical. Future possible trends for widening this profitable use are mentioned.     

Thermodynamic evaluation of new absorbent mixtures of lithium bromide and organic salts for absorption refrigeration machines

Mixtures of lithium bromide and organic salts of sodium and potassium (formate, acetate and lactate) have been evaluated as alternative absorbents for absorption refrigeration machines. The main objective is to overpass the limitations of lithium bromide and improve the characteristics and the efficiency of the refrigeration cycle. In order to select the mixture that presents better properties for its employment in absorption refrigeration cycles, a thermodynamic analysis have been done. Density, viscosity, enthalpies of dilution, solubility and vapour pressure data of the proposed mixtures have been measured. A simulation program has been developed to evaluate temperatures, heats exchanged in the different sections and the efficiency of the cycle.     

Enhanced Mechanical Properties and Corrosion Behavior of Biodegradable Mg-Zn/HA Composite

Metallurgical and Materials Transactions A - Magnesium (Mg) and its alloys have shown potential for use in the biomedical industry due to their excellent biological performance and biodegradability...     

搭载人类自体干细胞的纤维支架及其在软组织再生中的应用

文章介绍了搭载人类自体干细胞的纤维支架技术及其在软组织再生中的应用优势。选用藻酸盐材料结合人体干细胞搭载关键技术制成的纤维支架,同时具有促进血管再生和触发成脂分化的能力。