The impact of self-assembled monolayer thickness in hybrid gate dielectrics for organic thin-film transistors

We have investigated the electrical characteristics of hybrid dielectrics with a thickness of 6 nm or less that are composed of a plasma-grown aluminum oxide (AlO_x) layer and a self-assembled monolayer (SAM) of an aliphatic phosphonic acid. The impact of the quality of the AlO_x layer on the insulating properties of the double-layer dielectrics was assessed by comparing two different oxidation procedures, and the influence of the thickness of the organic SAM was evaluated by employing molecules with five different chain lengths. In order to decouple the relative contributions of the oxide and the SAM to the performance of the double-layer dielectrics we have also performed cyclic voltammetry measurements on indium tin oxide (ITO)/SAM devices without AlO_x layer. Finally, we have evaluated how the quality of the AlO_x layer and the thickness of the SAM affect the performance of low-voltage organic thin-film transistors (TFTs) that employ the thin AlO_x/SAM dielectrics as the gate dielectric. The results confirm the important role of the SAM in determining the breakdown voltage, in limiting the current density, and in compensating the somewhat lower quality of AlO_x layers produced under mild plasma conditions.     

The effect of increased yeast alcohol acetyltransferase and esterase activity on the flavour profiles of wine and distillates

The fruity odours of wine are largely derived from the synthesis of esters and higher alcohols during yeast fermentation. The ATF1- and ATF2-encoded alcohol acetyltransferases of S. cerevisiae are responsible for the synthesis of ethyl acetate and isoamyl acetate esters, while the EHT1-encoded ethanol hexanoyl transferase is responsible for synthesizing ethyl caproate. However, esters such as these might be degraded by the IAH1-encoded esterase. The objectives of this study were: (a) to overexpress the genes encoding ester-synthesizing and ester-degrading enzymes in wine yeast; (b) to prepare Colombard table wines and base wines for distillation using these modified strains; and (c) to analyse and compare the ester concentrations and aroma profiles of these wines and distillates. The overexpression of ATF1 significantly increased the concentrations of ethyl acetate, isoamyl acetate, 2-phenylethyl acetate and ethyl caproate, while the overexpression of ATF2 affected the concentrations of ethyl acetate and isoamyl acetate to a lesser degree. The overexpression of IAH1 resulted in a significant decrease in ethyl acetate, isoamyl acetate, hexyl acetate and 2-phenylethyl acetate. The overexpression of EHT1 resulted in a marked increase in ethyl caproate, ethyl caprylate and ethyl caprate. The flavour profile of the wines and distillates prepared using the modified strains were also significantly altered as indicated by formal sensory analysis. This study offers prospects for the development of wine yeast starter strains with optimized ester-producing capability that could assist winemakers in their effort to consistently produce wine and distillates such as brandy to definable flavour specifications and styles.     

Preparative isolation of isoflavones from soy and red clover

Numerous studies have demonstrated the potential of isoflavones occurring in soy (Glycine max L.) and red clover (Trifolium pratense L.) to alleviate climacteric complaints. They have also shown beneficial effects on the cardiovascular system and in the prevention of osteoporosis. As a result, several companies offer nutraceuticals based on soy or red clover extracts. The aim of the present study was the isolation of pure isoflavones on a preparative scale, in order to obtain standards for biological tests and for the quantification of isoflavones in nutraceuticals and foods. High-speed countercurrent chromatography, a special type of liquid-liquid partition chromatography, was applied to the preparative isolation of isoflavones. By using this technique the major monoglucosylated and acetylated isoflavones from soy extracts were obtained after a cleaning-up step on Amberlite XAD-7 material. Furthermore, it was possible to isolate isoflavone aglycones as well as glycosides from a red clover extract. Purity and identity of the isolated isoflavones were confirmed by HPLC with DAD, HPLC-ESI multiple-MS, and NMR spectroscopy.     

Operation of an optical in-well-pumped vertical-external-cavity surface-emitting laser

We report the operation of an optical in-well-pumped vertical-external-cavity surface-emitting laser. The laser delivers 1 W at 855 nm and is pumped with a cost-effective fiber-coupled laser diode emitting at 806 nm. The laser modal gain is examined and ways of optimizing the system are investigated and discussed.     

Performance and wake of a Savonius vertical‐axis wind turbine under different incoming conditions

In this study, the performance, drag, and horizontal midplane wake characteristics of a vertical‐axis Savonius wind turbine are investigated experimentally. The turbine is drag driven and has a helical configuration, with the top rotated 180° relative to the bottom. Both performance and wake measurements were conducted in four different inflow conditions, using Reynolds numbers of Re_D≈1.6×10⁵ and Re_D≈2.7×10⁵ and turbulence intensities of 0.6% and 5.7%. The efficiency of the turbine was found to be highly dependent on the Reynolds number of the incoming flow. In the high Reynolds number flow case, the efficiency was shown to be considerably higher, compared with the lower Reynolds number case. Increasing the incoming turbulence intensity was found to mitigate the Reynolds number effects. The drag of the turbine was shown to be independent of the turbine's rotational speed over the range tested, and it was slightly lower when the inflow turbulence was increased. The wake was captured for the described inflow conditions in both optimal and suboptimal operating conditions by varying the rotational speed of the turbine. The wake was found to be asymmetrical and deflected to the side where the blade moves opposite to the wind. The largest region of high turbulent kinetic energy was on the side where the blade is moving in the same direction as the wind. Based on the findings from the wake measurements, some recommendations on where to place supplementary turbines are made.     

Secondary effects of catalytic diesel particulate filters: conversion of PAHs versus formation of nitro-PAHs

Diesel particulate filters (DPFs) are a promising technology to detoxify diesel exhaust. However, the secondary combustion of diesel soot and associated compounds may also induce the formation of new pollutants. Diesel soot is rated as carcinogenic to humans and also acts as a carrier for a variety of genotoxic compounds such as certain polycyclic aromatic hydrocarbons (PAHs) or nitrated PAHs (nitro-PAHs). Furthermore, diesel exhaust contains considerable amounts of nitric oxide (NO), which can be converted to more powerful nitrating species like nitrogen dioxide (NO2), nitric acid (HNO3), and others. This mix of compounds may support nitration reactions in DPFs. Herein we report effects of two cordierite-based, monolithic, wall-flow DPFs on emissions of genotoxic PAHs and nitro-PAHs and compare these findings with those of a reporter gene bioassay sensitive to aryl hydrocarbons (AHs). Soot combustion was either catalyzed with an iron- or a copper/iron-based fuel additive (fuel-borne catalysts). A heavy duty diesel engine, operated according to the 8-stage ISO 8178/4 C1 cycle, was used as test platform. Emissions of all investigated 4- to 6-ring PAHs were reduced by about 40-90%, including those rated as carcinogenic. Emissions of 1- and 2-nitronaphthalene increased by about 20-100%. Among the 3-ring nitro-PAHs, emissions of 3-nitrophenanthrene decreased by about 30%, whereas 9-nitrophenanthrene and 9-nitroanthracene were found only after DPFs. In case of 4-ring nitro-PAHs, emissions of 3-nitrofluoranthene, 1-nitropyrene, and 4-nitropyrene decreased by about 40-60% with DPFs. Total AH-receptor (AHR) agonist concentrations of diesel exhaust were lowered by 80-90%, when using the iron- and copper-based DPFs. The tested PAHs accounted for < 1% of the total AHR-mediated response, indicating that considerable amounts of other aryl hydrocarbons must be present in filtered and unfiltered exhaust. We conclude that both DPFs detoxified diesel exhaust with respect to total aryl hydrocarbons, including the investigated carcinogenic PAHs, but we also noticed a secondary formation of selected nitro-PAHs. Nitration reactions were found to be stereoselective with a preferential substitution of hydrogen atoms at peri-positions. The stereoisomers obtained are related to combustion chemistry, but differ from those formed upon atmospheric nitration of PAHs.     

Nanoscale chemical imaging using top-illumination tip-enhanced Raman spectroscopy

We present a new top-illumination scheme for tip-enhanced Raman spectroscopy (TERS) in a gap-mode configuration with illumination and detection in a straightforward fashion perpendicular to the sample surface. This illumination focuses the light tightly around the tip end, which effectively diminishes far-field background contributions during TERS measurements. The setup maintains the entire functionality range of both the scanning probe microscopy and the confocal optical microscopy of the setup. For the first time, we show large (64 × 64 up to 200 × 200 pixels), high-resolution TERS imaging with full spectral information at every pixel, which is necessary for the chemical identification of sample constituents. With a scanning tunneling microscope tip and feedback, these TERS maps can be recorded with a resolution better than 15 nm (most likely even less, as discussed with Figure 6). An excellent enhancement (～10(7)×, sufficient for detection of few molecules) allows short acquisition times (<1 s/pixel) and reasonably low laser power (in the microwatt regime) yielding spectroscopic images with high pixel numbers in reasonable time (128 × 128 pixels in <25 min). To the best of our knowledge, no Raman maps with similar pixel numbers and full spectral information have ever been published.