Sampling Archimedean copulas

The challenge of efficiently sampling exchangeable and nested Archimedean copulas is addressed. Specific focus is put on large dimensions, where methods involving generator derivatives are not applicable. Additionally, new conditions under which Archimedean copulas can be mixed to construct nested Archimedean copulas are presented. Moreover, for some Archimedean families, direct sampling algorithms are given. For other families, sampling algorithms based on numerical inversion of Laplace transforms are suggested. For this purpose, the Fixed Talbot, Gaver Stehfest, Gaver Wynn rho, and Laguerre series algorithm are compared in terms of precision and runtime. Examples are given, including both exchangeable and nested Archimedean copulas.     

Polymerization in magnetic field: XVIII. Influence of surfactant nature on the synthesis and thermal properties of poly(methyl methacrylate) and poly[(methyl methacrylate)‐co‐(epoxypropyl methacrylate)]

BACKGROUND: The possibility to use β‐cyclodextrin as biodegradable tensioactive and an electromagnetic field in order to improve the kinetic parameters of radical emulsion polymerization is of interest. Thus, the influence of different surfactants—sodium lauryl sulfate (SLS) and β‐cyclodextrin (CD)—on the pathway of emulsion polymerization of methyl methacrylate (MMA) and emulsion copolymerization of MMA with 2,3‐epoxypropyl methacrylate (GMA) performed with or without the presence of a continuous electromagnetic field (MF) was studied. RESULTS: The presence of the MF leads to a considerable increase of the conversion during the first part of the reaction if the classic surfactant (SLS) is used. The reactions performed without MF and with CD exhibit a decrease of the conversion and of the polymerization rate as compared with the variants using SLS. The swelling rate and the maximum degree of swelling vary with the surfactant nature and with the reaction conditions and MF presence. Data from thermogravimetry and differential scanning calorimetry evidence the dependences between the polymer characteristics and the preparation conditions. CONCLUSION: This research underlines the coupling possibilities of the influence of a MF—growth of the reaction rate and conversion explained through radical pairs mechanism—with a combination of the ‘cage’ effect and ‘conformational control’ afforded by CD. The presence of MF and CD during the syntheses leads to an increase of T_g and an increase of PMMA and P(MMA‐co‐GMA) thermal stability. Copyright © 2007 Society of Chemical Industry     

Deconvolution Combined with Digital Colocalization Analysis to Study the Spatial Distribution of Tight and Adherens Junction Proteins

The relative spatial distribution of proteins was investigated with immunofluorescent methods by confocal laser scanning microscopy and digital image restoration. For confocal data sets recorded with a voxel dimension of 50 × 50 × 150 nm noise and blur can be decreased and the resolution in the z-axis increased by applying the maximum likelihood estimation algorithm of the Huygens software. This approach was successfully applied to the study of tight and adherens junctions in relation to the actin cytoskeleton in Madin Darby Canine Kidney cells. Colocalization analysis was done for pairs of probes using a histogram-based method. F-actin, occludin, zonula occludens 1, and E-cadherin were included in the study. Double-labeled preparations were used. The combination of deconvolution with the colocalization of confocal data sets offers a powerful tool to investigate the spatial arrangement of proteins.     

- : an executable specification language for solving all problems in NP

In this paper a logic-based specification language, called - , is presented. The language is obtained by extending through allowing a limited use of some second-order predicates of predefined form. - programs specify solutions to problems in a very abstract and concise way, and are executable. In the present prototype they are compiled to code, which is run to construct outputs. Second-order predicates of suitable form allow to limit the size of search spaces in order to obtain reasonably efficient construction of problem solutions. - expressive power is precisely characterized as to express exactly the problems in the class NP. The specification of several combinatorial problems in - is shown, and the efficiency of the generated programs is evaluated.     

Degradation of pharmaceutical compound pentoxifylline in water by non-thermal plasma treatment

The decomposition of a model pharmaceutical compound, pentoxifylline, in aqueous solution was investigated using a dielectric barrier discharge (DBD) in coaxial configuration, operated in pulsed regime, at atmospheric pressure and room temperature. The solution was made to flow as a film over the surface of the inner electrode of the plasma reactor, so the discharge was generated at the gas-liquid interface. Oxygen was introduced with a flow rate of 600 sccm. After 60 min plasma treatment 92.5% removal of pentoxifylline was achieved and the corresponding decomposition yield was 16 g/kWh. It was found that pentoxifylline degradation depended on the initial concentration of the compound, being faster for lower concentrations. Faster decomposition of pentoxifylline could be also achieved by increasing the pulse repetition rate, and implicitly the power introduced in the discharge, however, this had little effect on the decomposition yield. The degradation products were investigated by liquid chromatography-mass spectrometry technique (LC-MS). The evolution of the intermediates during plasma treatment showed a fast increase in the first 30 min, followed by a slower decrease, so that these products are almost completely removed after 120 min treatment time.     

Co-pyrolysis of pine cone with synthetic polymers

Biomass from pine cone (Pinus pinea L.) was co-pyrolyzed with synthetic polymers (PE, PP and PS) in order to investigate the effect of biomass and plastic nature on the product yields and quality of pyrolysis oils and chars. The pyrolysis temperature was of 500 °C and it was selected based on results from thermogravimetric analysis of the studied samples. Co-pyrolysis products namely gases, aqueous and tar fraction coming from biomass, oils from synthetic polymers and residual char were collected and analyzed. Due to the synergistic effect in the pyrolysis of the biomass/polymer mixtures, higher amounts of liquid products were obtained compared to theoretical ones. To investigate the effect of biomass content on the co-pyrolysis, the co-pyrolysis of pure cellulose as model natural polymer for biomass with polymer mixture was also carried out. In the presence of cellulose, degradation reaction leading to more gas formation and less char yield was more advanced than in the case of co-pyrolysis with pine cone. Co-pyrolysis gave polar oxygenated compounds distributed between tar and aqueous phase and hydrocarbon oils with composition depending on the type of synthetic polyolefin. Co-pyrolysis chars had higher calorific values compared to pyrolysis of biomass alone.     

Thermal and electrical behavior of polyimide/silica hybrid thin films

Silica‐containing polyimide films were prepared by sol‐gel technique using a poly(amic acid) and tetraethoxysilane. The poly(amic acid) was synthesized by solution polycondensation reaction of 4,4′‐oxydiphthalic anhydride with 2,6‐bis(3‐aminophenoxy)benzene and an aminosilane coupling agent, 3‐aminopropyltriethoxysilane. The properties of these films, such as water vapors sorption capacity, dynamic contact angles and contact angle hysteresis, thermal, and electrical behavior have been evaluated with respect to their structure. The polymer films exhibited good thermal stability having the initial decomposition temperature above 450°C, glass transition temperature in the range of 223?228°C, and low‐dielectric constant in the range of 2.64?3.16. Two subglass transitions, γ and β, were evidenced by dynamic mechanical analysis and dielectric spectroscopy. The surface morphology and the roughness were investigated by atomic force microscopy and scanning electron microscopy. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Perfluorinated acids in Arctic snow: new evidence for atmospheric formation

Perfluorinated acids (PFAs) are ubiquitously found in water and biota, including remote regions such as the High Arctic. Under environmental conditions, PFAs exist mainly as anions and are not expected to be subject to long-range atmospheric transport in the gas phase. Fluorinated telomer alcohols (FTOHs) are volatile and can be atmospherically oxidized to form perfluorocarboxylic acids. Analogously, fluorosulfamido alcohols can be oxidized to form perfluorooctane sulfonate (PFOS). High Arctic ice caps experience contamination solely from atmospheric sources. By examining concentrations of PFAs in ice cap samples, it is possible to determine atmospheric fluxes to the Arctic. Ice samples were collected from high Arctic ice caps in the spring of 2005 and 2006. Samples were concentrated using solid-phase extraction and analyzed by LC-MS-MS. PFAs were observed in all samples, dating from 1996 to 2005. Concentrations were in the low-mid pg L(-1) range and exhibited seasonality, with maximum concentrations in the spring-summer. The presence of perfluorodecanoic acid (PFDA) and perfluoroundecanoic acid (PFUnA) on the ice cap was indicative of atmospheric oxidation as a source. Ratios of PFAs to sodium concentrations were highly variable, signifying PFA concentrations on the ice cap were unrelated to marine chemistry. Fluxes of the PFAs were estimated to the area north of 65 degrees N for the 2005 season, which ranged from 114 to 587 kg year(-1) for perfluorooctanoic acid (PFOA), 73 to 860 kg year(-1) for perfluorononanoic acid (PFNA), 16 to 84 kg year(-1) for PFDA, 26 to 62 kg year(-1) for PFUnA, and 18 to 48 kg year(-1) for PFOS. The PFOA and PFNA fluxes agreed with FTOH modeling estimations. A decrease in PFOS concentrations through time was observed, suggesting a fast response to changes in production. These data suggest that atmospheric oxidation of volatile precursors is a primary source of PFAs to the Arctic.     

Increase of regression speed of combustion through oxidizer doping

This paper presents an innovative method to increase the regression speed of a solid fuel grain by using oxidizer doping. The results obtained on a propulsion application showing the performance parameters as an output of a numerical model are provided. Two models are given that predict the regression speed increase for embedding wires and for oxidizer doping with a factor of ～2 to 3. Also, it is shown that this increase of the regression speed by using a low oxidizer doping percentage, which is based on the assumption that at a higher doping rate the combustion instabilities, can lead to detonations. Next, a thermochemical model for the combustion within the oxidizer doping model is afforded. For this model, the burn is assumed to take place around the surface of each of the oxidizer particles, being composed of two different burning processes: one is the burning on the surface of the solid fuel grain and the other is the burning between the solid fuel and the solid oxidizer. For a non-doped fuel grain, the burning takes place only on the surface of the fuel grain. Finally, a potential application of such propulsion units to small satellite launchers is presented, and a case study of such a vehicle intended to place a 50 kg payload on a low earth orbit (300 to 500 km altitude) is described. The modelling proposed is based on the assumption that the use of solid methane makes this launcher environmentally friendly.     

Simultaneous biohydrogen production and wastewater treatment based on the selective enrichment of the fermentation ecosystem

Biohydrogen production from synthetic wastewater as substrate was studied in anaerobic small scale batch reactors. Enriched anaerobic mixed consortia sampled from various environments were used as parent inocula to start the bioreactors. Selective enrichments were achieved by various physical and chemical pretreatments and changes in the microbial communities were monitored by metagenomic and molecular diagnostics approaches. Experimental data showed the feasibility of biohydrogen production using synthetic wastewater as substrate. The hydrogen generation capability of the different mixed consortia is clearly dependent on the pretreatment methods. The described approach opens the possibility for an alternative way towards simultaneous wastewater treatment and renewable energy generation.