Poly(hydromethylsiloxane)-derived high internal phase emulsion-templated materials (polyHIPEs) containing palladium for catalytic applications

Journal of Materials Science - Cross-linking of poly(hydromethylsiloxane) (PHMS) with 1,3,5,7-tetramethyl-1,3,5,7-tetravinylcyclotetrasiloxane (D4Vi) in water-in-oil high internal phase emulsion...     

Changes of the tocopherol and fatty acid contents in rapeseed oil during refining

Among the most important metabolic compounds there are some which are not synthesized by human and animal organisms and have to be supplied in appropriate quantities in due time. Vitamin E and the essential unsaturated fatty acids have crucial physiological significance, and their greatest quantities occur in plant oils. During refining, apart from unnecessary substances, nutritionally advantageous compounds are also being eliminated. In the present paper changes of tocochromanols taking place during refining of rapeseed oil obtained from seeds of two subsequent crops were investigated. It was observed that losses of tocopherols exceeded 30%, two thirds of which resulted from distilling off during deodorization. The ratio of vitamin E to essential unsaturated fatty acids expressed as the Harris coefficient decreased in the refined oil obtained from seeds of two subsequent crops by about 28%.     

Single‐lumen tunneled catheter: An old but useful option

We report a case of long‐term uneventful catheter use in a patient with previous recurrent vascular access dysfunction and infection. A single‐lumen tunneled catheter was inserted into the left internal jugular vein after a failed attempt of dual‐lumen permanent catheter placement. The follow‐up since device implantation has exceeded 5 years without any complications related to vascular access.     

Creation of arteriovenous fistulae for hemodialysis in octogenarians

Elderly patients, defined as octogenarians and nonagenarians, are an increasing population entering renal replacement therapy. Advanced age appears as an exclusive factor negatively influencing dialysis practice. Elderly patients are referred late for the initiation of hemodialysis and more likely are offered catheters rather than arteriovenous fistulae (AVF), which increase mortality and negatively affect quality of life. We present our approach to the creation of vascular access for hemodialysis in this demanding population. In 2006–2012, 39 patients aged 85.9 ± 2.05 with end‐stage renal disease, mainly resulting from ischemic nephropathy, were admitted to the Department of Nephrology to establish permanent vascular access for hemodialysis: preferably AVF. Temporary dialysis catheters were implanted in uremic emergency to bridge the time to fistula creation/maturation. AVF was attempted in 87.2% of the patients. Primary AVF function was achieved in 54% of the patients. Cumulative proportional survival of AVF at months 12 and 24 was 81.5%. Ninety‐four percent of AVF were localized on the forearm: 74% in the distal and 20% in the proximal part. Mean duration of hemodialysis therapy was 20.80 ± 19.45 months. The mean time of AVF use was 15.9 ± 20.2 months. Until present, 38% have been dialyzed using AVF for 31.0 ± 18.8 months. Five patients died with functioning fistula. Eight patients initiated hemodialysis therapy with fistula. During further observation, the use of AVF increased to 62%. Elderly patients should not be denied creation of AVF as a rule. The outcome of AVF benefits more from acknowledging individual vascular conditions rather than age of the patient.     

Constrained motion planning of nonholonomic systems

This paper addresses the constrained motion planning problem for nonholonomic systems represented by driftless control systems with output. The problem consists in defining a control function driving the system output to a desirable point at a given time instant, whereas state and control variables remain over the control horizon within prescribed bounds. The state and control constraints are handled by extending the control system with a pair of state equations driven by the violation of constraints, and adding regularizing perturbations. For the regularized system a Jacobian motion planning algorithm is designed, called imbalanced. Solutions of example constrained motion planning problems for the rolling ball illustrate the theoretical concepts.     

Correlating the effects of ash elements and their association in the fuel matrix with the ash release during pulverized fuel combustion

During pulverized fuel combustion, inorganic elements such as alkalis, sulfur, chlorine, calcium and magnesium, as well as a range of minor elements are partly released into the gas phase. These gas-borne species can nucleate, coagulate and condense to form either aerosol particles or sticky layers on ash particles, leading to ash deposition and corrosion problems in power utilities. Furthermore, the fine aerosols can lead to harmful gaseous and particulate emissions. It is well documented that the mode of occurrence and the chemical speciation of ash forming elements in the coal/biomass structure are important for the release behavior of mineral components. In the presented work, this is investigated by performing quantitative elemental investigations of ash releases for two different coals (a Polish and a UK coal) and six diverse biomass fuels (Wood bark, Wood chips, Waste wood, Olive residue, Saw dust and Straw). The tests are performed within the Lab-scale Combustion Simulator (LCS) of the Energy Research Centre of the Netherlands (ECN). The operating conditions applied were that of a typical pulverized fuel (PF) fired boiler i.e. atmospheric pressure, high temperatures of 1400-1650 °C, and high heating rate of 10⁵ K/s. Gas phase elemental release of alkalis, sulfur, chlorine, calcium and magnesium has been quantified at relevant high carbon conversion levels. With the performed set of experiments several of the past observations from the literature are reconfirmed. In addition to this, based on the extensive data pool at hand, a simple but reliable (R² > 0.95) set of linear correlations have been proposed to predict the elemental release of potassium, sodium, chlorine and sulfur. It is also concluded that such linear expressions can be particularly effective for the prediction of elemental release from the fuels of similar characteristics, such as woody biomass.     

Comparison of approaches to the numerical modelling of pure metals solidification using the control volume method

The thermal processes proceeding in the casting-mould system are analysed. Solidification process can be described in the different ways. One of them consists in the application of the Fourier–Kirchhoff equation in which the source function controlling the phase change is introduced. In this paper, two approaches to the modelling of pure metals solidification, i.e. the solidification proceeding at the constant temperature and in the artificially introduced interval of temperature are considered. Numerical model used at the stage of computations is constructed using the Control Volume Method in which the principle of conservation of energy (taking also into account the release of latent heat of solidification) is applied to each control volume ensuring the correctness of the model. The use of Voronoi/Thiessen tessellation to the discretization of the casting-mould system can accurately reproduce the shape of each sub-domain. In the final part of the paper, the examples of computations are shown.     

Optimization of subtractive-transformative hybrid processes supported by the technological heredity concept

This paper presents the optimization procedure of a hybrid removal-forming type process based on the minimum energy consumption and demanded surface roughness which is supported by the analysis of transformation of the surface and sublayer properties termed as the technological heredity. The experimental investigation covers an alloy steel hardened to 35 HRC and 55 HRC which was initially turned using coated carbide and CBN tools and subsequently burnished to produce surfaces with Ra roughness parameter of about 0.15 μm. The modifications of the initial surface profiles, microstructure and microhardness of the sublayer were determined and relevant technological limits are selected.     

Melatonin as a Potential Adjuvant Treatment for COVID-19 beyond Sleep Disorders

Melatonin is registered to treat circadian rhythm sleep–wake disorders and insomnia in patients aged 55 years and over. The essential role of the circadian sleep rhythm in the deterioration of sleep quality during COVID-19 confinement and the lack of an adverse effect of melatonin on respiratory drive indicate that melatonin has the potential to be a recommended treatment for sleep disturbances related to COVID-19. This review article describes the effects of melatonin additional to its sleep-related effects, which make this drug an attractive therapeutic option for treating patients with COVID-19. The preclinical data suggest that melatonin may inhibit COVID-19 progression. It may lower the risk of the entrance of the SARS-CoV-2 virus into cells, reduce uncontrolled hyper-inflammation and the activation of immune cells, limit the damage of tissues and multiorgan failure due to the action of free radicals, and reduce ventilator-induced lung injury and the risk of disability resulting from fibrotic changes within the lungs. Melatonin may also increase the efficacy of COVID-19 vaccination. The high safety profile of melatonin and its potential anti-SARS-CoV-2 effects make this molecule a preferable drug for treating sleep disturbances in COVID-19 patients. However, randomized clinical trials are needed to verify the clinical usefulness of melatonin in the treatment of COVID-19.