Work-oriented development of knowledge-based systems: a case for multiple perspectives

System development is strongly influenced by the perspectives used by system developers. Current development methods for knowledge-based systems are based on an information processing perspectives of experts and users which has been criticized by a number of researchers. The paper argues that work-oriented development of knowledge-based systems requires the parallel use of multiple perspectives (including the information processing perspective), and that the use of any single perspective is potentially dangerous. As an example of the importance of using multiple perspectives, thepaper presents the situated action perspective, and shows how it complements the information processing perspective.     

pH and salt responsive poly(N,N-dimethylaminoethyl methacrylate) cylindrical brushes and their quaternized derivatives

We present the synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) cylindrical brushes, their pH responsiveness, and the corresponding quaternized analog, poly{[2-(methacryloyloxy)ethyl] trimethylammonium iodide} (PMETAI) brushes. PDMAEMA brushes were prepared by atom transfer radical polymerization (ATRP) using the grafting-from strategy. Initiating efficiencies of the ATRP processes were determined by cleaving the side-chains and gel permeation chromatography (GPC) analysis. Due to the slow initiation and steric hindrance, the initiating efficiency is only around 50%. The PDMAEMA brushes show worm-like structures and pH responsiveness, as proven by dynamic light scattering (DLS), atomic force microscopy (AFM), and cryogenic transmission electron microscopy (cryo-TEM) measurements. Strong cationic polyelectrolyte PMETAI brushes were produced by quaternization of the PDMAEMA brushes. AFM and cryo-TEM images showed similar worm-like morphologies for the PMETAI brushes. The PMETAI brushes collapsed in solution with high concentration of monovalent salt, as proven by DLS and AFM results.     

Mapping surface temperature in large lakes with MODIS data

Satellite sensor MODIS on two platforms can produce Sea Surface Temperature over certain regions about three to four times per day. Our objective was to test if the MODIS SST product can be applied for lakes whose surface areas are large enough to be observed at the MODIS spatial resolution and to compare the satellite-derived lake surface temperatures with in situ measurements. Surface temperatures for Lakes Vänern and Vättern in Sweden, two of the largest European lakes, are extracted from the MODIS/Terra images for period 2001-2003. The results are analyzed on different quality levels, as all MODIS L2 products are equipped with an additional quality flag. We present temperature development over 2001-2003, and show the capability of the MODIS SST product to couple the known thermodynamical features in the lakes under study, where temperature varies greatly with space and time. These results can complement lake monitoring programs anywhere.     

Optimal Control of Solar Sludge Dryers

Optimal control (OC) methodology is used to develop a control policy for a batch-operated solar sludge dryer with ventilation as the dominant control. Batch performance criteria and instantaneous optimization criteria are developed for two economic environments: quota limited and capital limited. The general formulation, as well as simplifications resulting from the multiplicative form of the evaporation (drying) rate model, are presented. The multiplicative form results in a single constant number, called here “control intensity,” which is used to guide the on-line control decisions. These decisions turn out to be independent of the dry solids content (DSC) of the sludge. Further simplification, by assuming a strictly constant weather, is used to demonstrate the general effects of the economic and physical (weather) environment on the solution.

The OC approach is used to address, via simulation under realistic weather conditions, several design, operation, and pricing problems. In particular, the following have been considered: sizing of the ventilation fans, determination of a fair fee for sludge disposal, finding the best final DSC, and evaluating the effect of the price of electricity. Regarding the particular location represented by the data, it has been shown that the installed capacity of the ventilation fans should be increased and that there seems to be sufficient economic incentive for solar drying.     

Local mobility within villin 14T probed via heteronuclear relaxation measurements and a reduced spectral density mapping

Villin 14T, a representative domain from the actin severing and bundling protein villin, binds calcium ions and actin monomers. To begin to understand the contributions of mobility to the villin-calcium and villin-actin interactions, relaxation rates for magnetization involving the amide nitrogens and protons have been measured for 15N-labeled villin 14T in solution. Although we have measured the complete set of rates required for a full spectral density map, difficulties in the accurate measurement of relaxation rates for antiphase coherence and two-spin order led us to consider a reduced mapping formalism. From the reduced spectral density map, a model-free analysis, or directly from the measured Nx,y relaxation rates, local variations in mobility along the backbone of villin 14T have been revealed. Fast motions are evident not only at the amino and carboxyl termini but also in the turn between strands beta 4 and beta 5 of the central beta-sheet and in the turn between helix alpha 3 and strand beta 7. Slower motions are suggested for the turn between strands beta 2 and beta 3. Motions on the microsecond to millisecond time scale have been probed directly by examining the dependence of the proton transverse relaxation rate on the spin-locking field strength. Leu11 shows a strong dependence on field strength, implying conformational exchange with a time constant of 125 +/- 69 microseconds. The backbone at the actin-binding interface appears to be rather rigid.     

The role of visual complexity and prototypicality regarding first impression of websites: Working towards understanding aesthetic judgments

This paper experimentally investigates the role of visual complexity (VC) and prototypicality (PT) as design factors of websites, shaping users' first impressions by means of two studies. In the first study, 119 screenshots of real websites varying in VC (low vs. medium vs. high) and PT (low vs. high) were rated on perceived aesthetics. Screenshot presentation time was varied as a between-subject factor (50 ms vs. 500 ms vs. 1000 ms). Results reveal that VC and PT affect participants' aesthetics ratings within the first 50 ms of exposure. In the second study presentation times were shortened to 17, 33 and 50 ms. Results suggest that VC and PT affect aesthetic perception even within 17 ms, though the effect of PT is less pronounced than the one of VC. With increasing presentation time the effect of PT becomes as influential as the VC effect. This supports the reasoning of the information-processing stage model of aesthetic processing (Leder et al., 2004), where VC is processed at an earlier stage than PT. Overall, websites with low VC and high PT were perceived as highly appealing.     

Jet bundle formulation of infinite-dimensional port-Hamiltonian systems using differential operators

We consider infinite-dimensional port-Hamiltonian systems described on jet bundles. Based on a power balance relation we introduce the port-Hamiltonian system representation using differential operators regarding the structural mapping, the dissipation mapping and the input mapping. In contrast to the well-known representation on the basis of the underlying Stokes–Dirac structure our approach is not necessarily based on using energy-variables which leads to a different port-Hamiltonian representation of the analyzed partial differential equations. The presented constructions will be specialized to mechanical systems to which class also the presented examples belong.     

Aggregation behaviour of well defined amphiphilic diblock copolymers with poly(N-isopropylacrylamide) and hydrophobic blocks

Series of amphiphilic diblock copolymers with poly(N-isopropylacrylamide) as a hydrophilic block and a hydrophobic block consisting of either polystyrene or poly(tert-butyl methacrylate) were synthesised using RAFT polymerisations. Differential scanning calorimetry showed the chemically different blocks being phase separated in dry polymers. Light scattering and microcalorimetry studies were performed on aqueous solutions to investigate the phase behavior of the diblock copolymers. By carefully transferring the polymers from an organic solvent to water, either micellar particles or large aggregates were obtained depending on the relative lengths of the blocks. Large aggregates collapsed upon heating, whereas collapse occurred slowly within a broad temperature range in the case of micelle like structures. However, microcalorimetrically the collapse of the PNIPAM chains was observed to take place in all samples, suggesting that the shells of the micellar particles are crowded in a way which hinders the compression of the poly(N-isopropylacrylamide) chains.     

Organic Nanoparticles with Polypropyleneoxide Chains as Support for Metallocene Catalysts: Ethylene Homopolymerization and Ethylene/α-olefin Copolymerization

Summary Novel organic nanoparticles functionalized with nucleophilic polypropyleneoxide (PPO) chains on their surfaces for supporting metallocene catalysts in heterogeneous olefin polymerization are presented. The nanoparticles (60–100 nm) were obtained by miniemulsion polymerization of styrene, divinylbenzene and PPO functionalized styrene. It is demonstrated that Me₂Si(2MeBenzlnd)₂ZrCl₂/MAO supported on these nanoparticles is suitable for the homopolymerization of ethylene, resulting in excellent product morphologies and high activities. lt is shown that by varying the MAO/Zr ratios and Zr concentrations the activities and productivities of the catalysts as well as the qualities of the polyethylene products can be tuned. These new supported catalysts are also suitable for the copolymerization of ethylene with several comonomers (1-hexene, 1-octene, 1-decene or norbornene). As the obtained product properties like crystallinity, melting temperature or bulk density match the results of silica supported systems, these organic nanoparticles can be considered as alternative carriers in comparison to the established inorganic ones.