Annealing Effect in GaDyN on Optical and Magnetic Properties

The annealing effect on the optical and magnetic properties of the GaDyN layers was studied. The PL intensities of yellow and green bands as well as the intra-4f orbital transition of Dy³⁺ ions were found to decrease for the samples annealed at 900 and 1000 °C. It is supposed that the intra-4f orbital transition is related to the broad peak luminescence coming from defects. Increasing the annealing temperature, the magnetization becomes smaller. It is considerable that the number of electrons coming from defects was reduced by the annealing treatments and that the ferromagnetism in GaDyN is attributed as carrier induced ferromagnetism.     

Eddy current analysis of thin metal container in induction heating by line integral equations

In recent years, induction‐heating cookers have spread rapidly. It is desirable to commercialize flexible and disposable food containers that are suitable for induction heating. In order to develop a good‐quality food container for moderate heating, the eddy currents induced in a thin metal plate must be accurately analyzed. The integral equation method is widely used for solving induction‐heating problems. If the plate thickness approaches zero, the surface integral equations on the upper and lower plate surfaces tend to become the same and the equations become ill‐conditioned. In this paper, we first derive line integral equations from the boundary integral equations under the assumption that the electromagnetic fields in the metal are attenuated more rapidly than those along the metal surface. Next, to test the validity of the line integral equations, we solve for the eddy current induced in a thin metal container in induction heating and obtain the power density imparted to the container and the impedance characteristics of the heating coil. We then compare the computed results with those obtained by the FEM. © 2009 Wiley Periodicals, Inc. Electr Eng Jpn, 168(2): 20–27, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20813     

Layered mixed-anion compounds: Epitaxial growth,active function exploration,and device application

Optoelectronic properties and device applications of layered mixed-anion compounds such as oxychalcogenide LaCuOCh (Ch = chalcogen) and oxypnictide LaT_MOPn (T_M = 3d transition metal, Pn = pnicogen) are reviewed. Several distinctive functions have been found in these materials based on our original material exploration concept. Fabrication of high-quality epitaxial films of LaCuOCh leads to clarifying the excellent electrical and optical properties such as high hole mobility of 8 cm²/(V s) and heavy hole doping at >10²¹ cm^?3 in LaCuOSe, and sharp and tunable-wavelength photoluminescence in the solid–solution systems in LaCuOCh. In addition, a room temperature operation of a light-emitting diode is demonstrated using LaCuOSe as a light-emitting layer. These results suggest that the layered oxychalcogenides have potential for light-emitting layers as well as transparent hole-injection layers in organic/inorganic light-emitting diodes. Furthermore, by extending the material system from the copper-based oxychalcogenides to isostructural compounds, transition metal-based oxypnictides LaT_MOP (T_M = Fe, Ni), we have found novel superconductors, LaFeOP and LaNiOP.     

Thin-film transistors based on liquid-crystalline tetrafluorophenylter thiophene derivatives: thin-film structure and carrier transport

The authors fabricated thin films by solution processes using liquid-crystalline (LC) semiconductors, 5-alkyl-5’’-(4-hexyltetrafluorophenyl)-2,2’:5’,2’’-terthiophene (2–5). Films of 5-propyl-5’’-(4-hexyltetrafluorophenyl)-2,2’:5’,2’’-terthiophene (2) show similar molecular packing as their non-fluorinated counterparts. However, the degree of molecular packing ordering from X-ray diffraction measurement is higher, and the films exhibit a more crystal-like structure. Moreover, fluorination has a remarkable effect on their mesomorphic behaviors. Films of 2 consist of large size LC domains (in the range of 100 μm) at room temperature. Thin-film transistors (TFTs) of 2 show p-type operation with good hole mobility up to 0.027 cm²/Vs as well as improved operation stability under ambient conditions and high on/off ratio. Tetrafluorophenyl substitution leads to lowering of HOMO energy by 0.15 eV for 2 and 0.35 eV for 5, resulting in operation stability. Variable-temperature current-voltage measurements indicate intrinsic carrier transport in films of 2.     

TEM/STEM Observation of ZrC Coating Layer for Advanced High-Temperature Gas-Cooled Reactor Fuel, Part II

The Japan Atomic Energy Agency (JAEA) has started to study and develop zirconium carbide (ZrC)-coated fuel particles for advanced high-temperature gas-cooled reactors. The ZrC coating layer has been fabricated at JAEA by chemical vapor deposition using a pyrolytic reaction of zirconium bromide. The microstructures of the ZrC layers, whose nominal deposition temperatures could be measured and controlled during the deposition process, were characterized by means of TEM and STEM. In the present study, three batches were prepared and compared with each other as well as the previous batches. The crystallographic orientation of ZrC with regard to the growth direction in the ZrC layers deposited at a constant temperature of 1630 K was different from that deposited at varying temperatures in the 1493–1823 K range. A thin layer of turbostratic carbon was observed at the boundary between pyrolytic carbon and ZrC in particles deposited at the highest temperature among those used in this study (the nominal temperature was 1769 K); no such structure was found in a batch deposited at a lower temperature (the nominal temperature was 1632 K). Therefore, precise control of temperature is shown to be critical to the formation of good ZrC coatings.     

Determination of seventeen pesticide residues in agricultural products by LC/MS

Residues of 17 pesticides in agricultural products were determined by LC/MS with an atmospheric pressure chemical ionization (APCI) interface in both positive and negative ion modes. Pesticides were extracted with acetonitrile, and the extracts were cleaned-up with a primary and secondary amine (PSA) mini-column eluted with acetone-hexane (1:1). Rice, orange and potato were spiked with the 17 pesticides at 0.1 microgram/g and analyzed by the proposed method. The average recoveries of these pesticides usually ranged from 70 to 98% and the relative standard deviations were usually around 10%. These results suggested that LC/MS with APCI could be used to determine the residue levels of the 17 pesticides in these crops.     

Numerical simulation of an arbitrarily ended asymmetrical slab waveguide by guided-mode extracted integral equations

The scattering phenomenon from an arbitrary-shaped end of a asymmetrical slab waveguide for the cases of TE and TM guided modes is simulated by means of boundary integral equations that are called guided-mode extracted integral equations. The integral equations that we derive can be solved by the conventional boundary-element method. Numerical results are presented for problems of three-layer asymmetrical waveguides with tilted ends. The reflection coefficient, reflected and scattered powers, and radiation patterns are calculated numerically for the cases of incident TE and TM guided modes.     

Isotope 18O/16O ratio measurements of water vapor by use of the 950-nm wavelength region with cavity ring-down and photoacoustic spectroscopic techniques

Two optical methods, cavity ring-down spectroscopy and photoacoustic spectroscopy, are applied to the measurement of the isotope ratio 18O/16O in water-vapor samples with a Nd3+:YAG pumped-dye laser. The combination band of (2v1 + v3) in the 960-nm region of water molecules is investigated for two standard water samples, the Vienna Standard Mean Ocean Water and the Standard Light Antarctic Precipitation. The results demonstrate that the two methods have the potential of compact systems for in-situ measurements of H2O isotope ratio in the environment.     

On unique representations of certain dynamical systems produced by continuous-time recurrent neural networks

This article extends previous mathematical studies on elucidating the redundancy for describing functions by feedforward neural networks (FNNs) to the elucidation of redundancy for describing dynamical systems (DSs) by continuous-time recurrent neural networks (RNNs). In order to approximate a DS on R(n) using an RNN with n visible units, an n-dimensional affine neural dynamical system (A-NDS) can be used as the DS actually produced by the above RNN under an affine map from its visible state-space R(n) to its hidden state-space. Therefore, we consider the problem of clarifying the redundancy for describing A-NDSs by RNNs and affine maps. We clarify to what extent a pair of an RNN and an affine map is uniquely determined by its corresponding A-NDS and also give a nonredundant sufficient search set for the DS approximation problem based on A-NDS.