Separation of aromatic components from light cycle oil by solvent extraction

To improve the versatility of light cycle oil (LCO), separation of aromatic compounds from LCO by solvent extraction was investigated. LCO was analyzed to identify 35 components: 19 aromatics and 16 alkanes. The batch liquid–liquid equilibrium extraction of LCO was performed using furfural, sulfolane, and methanol as extraction solvents. In each solvent, the aromatics present in LCO were selectively extracted relative to the alkanes. The separation selectivities of aromatics relative to alkanes were larger in sulfolane than in the other solvents. Among the aromatic components, di- and tricyclic compounds were selectively extracted relative to the monocyclic ones.     

Emergent membrane-affecting properties of BSA-gold nanoparticle constructs

By adsorbing bovine serum albumin (BSA) on gold nanoparticles (Aunps) with diameters 30 nm and 80 nm, different degrees of protein unfolding were obtained. Adsorption and adlayer conformation were characterized by UV-vis spectroscopy, ζ-potential measurements, steady-state and time-resolved fluorescence. The unfolding was also studied using 1-anilino-8-naphthalene sulfonate (ANS) as an extrinsic probe, showing that BSA unfolds more on 80 nm Aunp than on 30 nm Aunp. Langmuir monolayer studies using two distinct methods of introducing the BSA and BSA-Aunp constructs accompanied with Brewster Angle Microscopy (BAM) and Digital Video Microscope (DVM) imaging demonstrated that BSA-Aunp constructs induce film miscibility with L-α-phosphatidylethanolamine not seen for BSA or Aunp alone. The changes induced by partial unfolding clearly give better film-penetration ability, as well as disruption of liquid crystalline domains in the film, thereby inducing film miscibility. Gold or protein only does not possess the nanoscale film-affecting properties of the protein-gold constructs, and as such the surface-active and miscibility-affecting characteristics of the BSA-Aunp represent emergent qualities.     

Analysis of enoyl-coenzyme A hydratase activity and its stereospecificity using high-performance liquid chromatography equipped with chiral separation column

Enoyl-coenzyme A (CoA) hydratase catalyzes the hydration of trans-2-enoyl-CoA to yield 3-hydroxyacyl-CoA during fatty acid degradation (β-oxidation). Although much research has focused on the stereospecificities of 2-enoyl-CoA hydratases, a direct quantification of the production of 3(R)- and 3(S)-hydroxyacyl-CoA has not yet been established. Therefore, we developed a method of concurrently quantifying 3(R)- and 3(S)-hydroxyacyl-CoA using high-performance liquid chromatography (HPLC) equipped with a chiral separation column. The optimized conditions for the separation of 3(R)-, 3(S)-hydroxyhexadecanoyl-CoA and trans-2-hexadecenoyl-CoA, were determined to be as follows: mobile phase of 35/65 (v/v) of 50 mM phosphate buffer (pH 5.0)/methanol; flow rate of 0.5 mL/min; detection at 260 nm; and column temperature of 25°C. This method was applied to subcellular fractions of rat liver; the results directly confirmed that 3(S)-hydroxyhexadecanoyl-CoA is the dominant product obtained from the heat-stable enoyl-CoA hydratase-catalyzed reaction of trans-2-hexadecenoyl-CoA. Finally, the stereospecificities of L-bifunctional protein (L-BP) and D-bifunctional protein (D-BP) were reinvestigated using this method, and it was confirmed that L- and D-BP yielded 3(S)- and 3(R)-hydroxyhexadecanoyl-CoA were yielded from trans-2-hexadecenoyl-CoA, respectively. 3(R)-Hydroxyacyl-CoA is a peroxisomal β-oxidation-specific intermediate. Therefore, this method is potentially useful not only studies regarding the stereochemistry of enoyl-CoA hydratase but also for the diagnosis of diseases caused by defects of peroxisomal enoyl-CoA hydratase.     

Effect of temperature and heating rate on the sintering of leucite-based dental porcelains

The aim of this work was to determine the effect of temperature and heating rate on the densification of four leucite-based dental porcelains: two low-fusion (Dentsply-Ceramco and Ivoclar) and two high-fusion commercial porcelains (Dentsply-Ceramco). Porcelain powders were characterized by differential thermal analysis (DTA), X-ray diffraction (XRD), particle size distribution, helium picnometry, and by scanning electron microscopy. Test specimens were sintered from 600 to 1050 °C, with heating rates of 55 °C/min and 10 °C/min. The bulk density of the specimens was measured by the Archimedes method in water, and microstructures of fracture surfaces were analyzed by scanning electron microscopy (SEM). The results showed that densification of specimens increased with the increase in temperature. The increase in the heating rate had no effect on the densification of the porcelains studied. Both high-fusion materials and one of the low-fusing porcelains reached the maximum densification at a temperature that was 50 °C lower than that recommended by the manufactures.     

Electrochemical properties of N-doped hydrogenated amorphous carbon films fabricated by plasma-enhanced chemical vapor deposition methods

Nitrogen-doped hydrogenated amorphous carbon thin films (a-C:N:H, N-doped DLC) were synthesized with microwave-assisted plasma-enhanced chemical vapor deposition widely used for DLC coating such as the inner surface of PET bottles. The electrochemical properties of N-doped DLC surfaces that can be useful in the application as an electrochemical sensor were investigated. N-doped DLC was easily fabricated using the vapor of nitrogen contained hydrocarbon as carbon and nitrogen source. A N/C ratio of resulting N-doped DLC films was 0.08 and atomic ratio of sp³/sp²-bonded carbons was 25/75. The electrical resistivity and optical gap were 0.695 Ω cm and 0.38 eV, respectively. N-doped DLC thin film was found to be an ideal polarizable electrode material with physical stability and chemical inertness. The film has a wide working potential range over 3 V, low double-layer capacitance, and high resistance to electrochemically induced corrosion in strong acid media, which were the same level as those for boron-doped diamond (BDD). The charge transfer rates for the inorganic redox species, Fe^2+/3+ and Fe(CN)₆^4−/3− at N-doped DLC were sufficiently high. The redox reaction of Ce^2+/3+ with standard potential higher than H₂O/O₂ were observed due to the wider potential window. At N-doped DLC, the change of the kinetics of Fe(CN)₆^3−/4− by surface oxidation is different from that at BDD. The rate of Fe(CN)₆^3−/4− was not varied before and after oxidative treatment on N-doped DLC includes sp² carbons, which indicates high durability of the electrochemical activity against surface oxidation.     

Liquid‐phase sintering of highly Na+ ion conducting Na3Zr2Si2PO12 ceramics using Na3BO3 additive

Na₃Zr₂Si₂PO₁₂ (NASICON) is a promising material as a solid electrolyte for all‐solid‐state sodium batteries. Nevertheless, one challenge for the application of NASICON in batteries is their high sintering temperature above 1200°C, which can lead to volatilization of light elements and undesirable side reactions with electrode materials at such high temperatures. In this study, liquid‐phase sintering of NASICON with a Na₃BO₃ (NBO) additive was performed for the first time to lower the NASICON sintering temperature. A dense NASICON‐based ceramic was successfully obtained by sintering at 900°C with 4.8 wt% NBO. This liquid‐phase sintered NASICON ceramic exhibited high total conductivity of ~1 × 10^?3 S cm^?1 at room temperature and low conduction activation energy of 28 kJ mol^?1. Since the room‐temperature conductivity is identical to that of conventional high‐temperature‐sintered NASICON, NBO was demonstrated as a good liquid‐phase sintering additive for NASICON solid electrolyte. In the NASICON with 4.8 wt% NBO ceramic, most of the NASICON grains directly bonded with each other and some submicron sodium borates segregated in particulate form without full penetration to NASICON grain boundaries. This characteristic composite microstructure contributed to the high conductivity of the liquid‐phase sintered NASICON.     

Separation of Small Particles Suspended in Liquid by Nonuniform Traveling Field

A study of size and charge-dependent separation of small particles in liquid using a traveling-field-type electric curtain device is made. The principle of the separation is to make use of the spatial harmonic components of the rotating traveling field produced by such a device, the first harmonic propagating in one direction, which plays a dominant role in the region distant from the electrodes, and the second harmonic propagating in the opposite direction, which becomes dominant near the electrodes. Small particles brought into this field undergo circular motion and, as a result of field nonuniformity, are repelled from the electrodes and drift in the direction of the dominant harmonics. The lighter or more charged particles are strongly repelled from the electrodes and swept by the first harmonic, while the heavier or less charged particles can approach the electrodes and are transported by the second harmonic in the opposite direction, thus enabling separation by mass and charge. First a theoretical investigation of this method is made to clarify the operation conditions for the separation, then the experimental observations of particle motion are made and scaling laws of transport velocity with the applied voltage and frequency are confirmed. Finally, an example of a cell separator design using this method is presented.