Studies on ion-exchange membranes. XXXII. Heterogeneity in ion-exchange membranes

Twelve kinds of cation-exchange membranes were treated with hydrogen peroxide. Some of them (Selemion CMV, Nepton CR-61, Scrion C-100, SAM-1) were completely destroyed. Heterogeneity is believed to be present in that part of their chemical structures that is decomposable by the treatment. The other membranes were converted into porous membranes by the decomposition of the resinous part. Water permeabilities and electric resistances of the porous membranes were examined to evaluate the pore radius. It was concluded that the “paste method” membranes have a heterogeneity or localized distribution of the resinous part under 50 mμ. The “paste method” membranes seemed to resemble the “graft method” membranes in chemical structure and to be much different from the mosaic-type membranes such as Permaplex and MC-3142. These results were also supported by extraction of the membranes with appropriate solvents and observation by electron microscopy.     

Structural study of hexane-soluble products from hydroliquefaction of three Yallourn brown coal lithotypes over molten salt catalysts

The hexane-soluble fractions of hydroliquefied products from three Yallourn brown coal lithotypes have been separated into five fractions by combined silica-alumina packed column chromatography. Analyses of various fractions by g.c.-m.s. permitted the identification of ≈50 components in the saturate fraction and 40 components in the diaromatic fraction, together with 30 components in the monoaromatics. The components identified were quite similar among hexane-soluble portions of all three lithotypes. A marked predominance of even carbon number alkane (C₂₃-C₂₉) was observed in the hydrocarbon fractions from pale lithotype over $\text{ZnCl}{}_2\text{KCl}$, and medium light lithotype over both pure ZnCl₂ and $\text{ZnCl}{}_2\text{KCl}$. However, medium dark lithotype over both melt catalysts produced a saturate fraction with an odd carbon number(C₂₂-C₂₈) preference. Based on spectral methods, Soxhlet extracts obtained from untreated lithotypes (hexane and benzene solubles) were characterized as complex mixtures of higher molecular weight(300–1000) aliphatic hydrocarbons, which were supposed to be a precursor of the saturates produced from the corresponding lithotype in the catalytic hydroliquefaction.     

Morphology of composite film prepared by polymerizing styrene in poly(vinyl chloride) film

Styrene and the styrene-additive mixtures (kerosene, dioxane, ethylene dichloride, or dioctylphthalate) were soaked into a poly(vinylchloride) film and then styrene was polymerized. Subsequently, poly(styrene) was extracted with CCl₄ and the microporous membrane was obtained, of which the morphology was studied. It is elucidated that the additives affect the morphology of the resultant composite films.     

Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

Novel Components of the Sex Pheromones Produced by Emerald Moths: Identification,Synthesis, and Field Evaluation

The subfamily Geometrinae (Lepidoptera: Geometridae) includes many species called emerald moths. Based on our recent finding of novel polyenyl compounds, including a double bond at the 12-position from two geometrine species, Hemithea tritonaria and Thalassodes immissaria intaminata, (6Z,9Z,12Z)-6,9,12-trienes and (3Z,6Z,9Z,12Z)-3,6,9,12-tetraenes with a C₁₇–C₂₀ straight chain were synthesized and analyzed by GC-MS. The 6,9,12-trienes, which were prepared by a double Wittig reaction between two alkanals and an ylide derived from (Z)-1,6-diiodo-3-hexene, characteristically produced fragment ions at m/z 79, 150, and M–98. The 3,6,9,12-tetraenes, which were prepared by a coupling between (Z)-3-alkenal and an ylide derived from (3Z,6Z)-1-iodo-3,6-nonadiene, showed fragment ions at m/z 79, 148, and M–96. These diagnostic ions were useful to distinguish these compounds from other known polyenyl pheromones, such as 4,6,9- and 6,9,11-trienes and 1,3,6,9-tetraenes. With reference to the GC-MS data, pheromone extracts of other species in Geometrinae inhabiting the Iriomote Islands were analyzed, and the 6,9,12-trienes were identified in the pheromone gland extracts of Pamphlebia rubrolimbraria rubrolimbraria and Maxates versicauda microptera. Furthermore, a field evaluation of the synthetic polyenes in a mixed forest of Tokyo revealed the following new male attractants for emerald moths: Idiochlora ussuriaria by a C₁₇ 6,9,12-triene and Jodis lactearia by a C₂₀ 3,6,9,12-tetraene, indicating the characteristic chemical structures of Geometrinae pheromones. On the other hand, through reexamination of the pheromone extract of H. tritonaria, (3E,6E)-α-farnesene was identified as an electrophysiologically active component in addition to the C₁₇ 6,9,12-triene. The binary mixture attracted more males than the single component lure baited with the triene in the Iriomote Islands.     

Breaking Ability and Interrupting Phenomena of a Circuit Breaker Equipped with a Parallel Resistor or Capacitor

This paper discusses the breaking ability of an air blast circuit breaker (ABB) or SF6 gas circuit breaker (GCB), and the interrupting phenomena around current zero in the case where a resistor or capacitor is connected in parallel with its interrupter to improve the breaking ability. It has been clarified that the use of a parallel resistor for ABB, and that of a parallel capacitor for GCB are the most effective methods to improve the breaking abilities; the parallel resistor not only serves to reduce the rate of rise of the transient recovery voltage (rrrV), but also shifts the current from the interrupter to itself around the current zero, thus reducing the stress for interruption. The improvement of the breaking ability is achieved by reducing the initial average rrrV between zero and 1 microseconds (inherent value), when the parallel capacitor is used with the GCB.     

A new learning method using prior information of neural networks

In this paper, we present a new learning method using prior information for three-layered neural networks. Usually when neural networks are used for identification of systems, all of their weights are trained independently, without considering their interrelation of weight values. Thus the training results are not usually good. The reason for this is that each parameter has its influence on others during the learning. To overcome this problem, first, we give an exact mathematical equation that describes the relation between weight values given by a set of data conveying prior information. Then we present a new learning method that trains a part of the weights and calculates the others by using these exact mathematical equations. In almost all cases, this method keeps prior information given by a mathematical structure exactly during the learning. In addition, a learning method using prior information expressed by inequality is also presented. In any case, the degree of freedom of networks (the number of     

Effects of brushing with a dentifrice for sensitive teeth on tubule occlusion and abrasion of dentin

By using a dentifrice or toothpaste for sensitive teeth, the brushing-induced effects on dentinal tubule occlusion and abrasion of human sound dentin were investigated with a scanning electron microscope and a scanning laser microscope. The dentifrice contained diatomaceous earth and silica as abrasives and strontium chloride hexahydrate as an active ingredient. Thirty dentin pieces of human premolar teeth with an average of 20% occluded dentinal tubules were attached to resin plates and exposed to the oral cavities of five adult subjects for 2, 4, and 8 weeks. Brushing with and without dentifrice was performed 1 min per day, respectively. Brushing with the dentifrice gradually decreased the mean average of occluded tubules from about 91 to 77% during 2 to 8 weeks, although there were no significant differences among the individual values. However, the mean abrasive loss of the dentin surfaces brushed with dentifrice significantly increased from about 52 to 143 microm in depth. The brushed surfaces of the dentin showed a rough topography with numerous toothbrush scratches but no organic pellicle was found. On the other hand, brushing without dentifrice caused about 99% of the dentinal tubules to occlude in 2 and 4 weeks and 100% in 8 weeks. The brushed dentin surfaces at 8 weeks were entirely covered with organic pellicle containing fine mineral granules derived from saliva, and the abrasive loss was about 1.4 microm in mean depth. Such results indicate that brushing with abrasive dentifrices for sensitive teeth remarkably erodes dentin, and suggest that the brushing should cause the dentinal tubules to open again for a certain period of time.     

Solid-state diffusion bonding of silicon nitride using titanium foils

This article presents an effective way to control the interfacial reaction during solid-state diffusion bonding of silicon nitride (Si₃N₄) using titanium foils. The interfacial structure and its growth kinetics were analyzed in detail with scanning electron microscopy (SEM), electron-probe microanalysis (EPMA), and X-ray diffraction (XRD). The actual phase sequence of the joint interfaces bonded at temperatures between 1473 and 1673 K is concluded to be Si₃N₄/Ti₅Si₃(N)/α-Ti(N)+Ti₅Si₃(N), which is different from the phase sequence observed at room temperature after bonding. The joints are very weak due to the formation of a brittle Ti₅Si₃(N) layer at the interface. To suppress the growth of the Ti₅Si₃ layer, a nitrogen-solution treatment of titanium foils prior to each bonding experiment is implemented. Although a perfect prevention of the Ti₅Si₃(N) layer formation is not achieved with this treatment, it is shown that the growth of the layer is effectively suppressed enough to improve the joint strength to a level 3 times higher than the case in which pure titanium is employed.     

PEI-assisted preparation of Au nanoparticles via reductive crystallization process

Nano-sized gold particles were prepared in a solution containing polyethylenimine (PEI) utilizing a batch reactor. PEI acts as a reducing agent as well as a stabilizing agent of nanoparticles. The effects of initial concentration of PEI on the mean particle diameter, coefficient of variation (C.V.), growth rate, nucleation rate and the number of nuclei were studied. The particle diameter of gold decreased markedly with increasing initial concentration of PEI, from 3.3 μm to a minimum value of about 5 nm. The observed decrease of particle diameter was considered to be caused by the growth-inhibiting effect of PEI, which affects the conclusive number of nuclei.