Effect of Lipase Activity and Specificity on the DAG Content of Olive Oil from the Shodoshima-Produced Olive Fruits

Olive oils have a higher relative diacylglycerol (DAG) content than other plant oils. The lipase in olive fruits is involved in DAG production and is directly related to the acidity of the olive oil. However, the lipase activity and positional selectivity have not been clarified. To investigate the properties of olive fruit lipase, olive fruits of the Mission variety harvested during mid-December of 2005 on Shodoshima Island (Japan) were stored at 20, 30 or 40 °C for 4 weeks. Changes in the acidity and acylglycerol content of the oils extracted from the stored fruits were analyzed. The acidity and DAG content of the olive oils increased due to triacylglycerol (TAG) hydrolysis during storage. sn-1,2-DAGs preferentially increased during the early stages of storage, indicating that the olive fruit lipase is enantioselective for the sn-3 position, while non-enzymatic isomerization of sn-1,2-DAGs was observed throughout the entire duration of storage. Kinetic analysis revealed that the enantioselectivity of olive fruit lipase for the sn-3 position was approximately four times greater than for the sn-1 position. The lipase was gradually inactivated at temperatures of 30 °C or higher, and the ratios of the rate constant for inactivation to TAG hydrolysis at the sn-3 position was 0.2, 13, and 23 at 20, 30, and 40 °C, respectively.     

Synthesis and application of fluorescein- and biotin-labeled molecular probes for the chemokine receptor CXCR4

The design, synthesis, and bioevaluation of fluorescence- and biotin-labeled CXCR4 antagonists are described. The modification of D-Lys8 at an epsilon-amino group in the peptide antagonist Ac-TZ14011 derived from polyphemusin II had no significant influence on the potent binding of the peptide to the CXCR4 receptor. The application of the labeled peptides in flow cytometry and confocal microscopy studies demonstrated the selectivity of their binding to the CXCR4 receptor, but not to CXCR7, which was recently reported to be another receptor for stromal cell-derived factor 1 (SDF-1)/CXCL12.     

TIG电弧活性化焊接现象和机理研究(3)--活性化TIG焊接中的熔池表面张力测定

利用熔池振荡及熔池谐振信号的检测,以熔池自身固有振荡频率与熔池尺寸的内在关系测定熔池金属表面张力,研究了薄板ＳＵＳ３０４不锈钢ＴＩＧ焊不同熔池尺寸的表面张力变化以及活性剂对熔池表面张力的影响。实验研究方法为焊接熔池表面张力测定中的最初应用。     

Acrolein formation in the oxidation of ethane over silica catalysts supporting iron and cesium

A significant yield of aldehydes was obtained by the partial oxidation of ethane over alkali‐modified Fe/SiO₂ catalysts at 475°C (<2% in the case of Cs–Fe/SiO₂). Not only acetaldehyde and formaldehyde but also acrolein were produced in the present system. There are no reports regarding the catalysts for the direct acrolein formation from partial oxidation of ethane. Such significant promoting effect of alkali‐modified Fe/SiO₂ catalysts in the partial oxidation of hydrocarbons has never been observed. Aldol‐type condensation for formation of acrolein could occur in the partial oxidation of ethane over alkali‐modified Fe/SiO₂ catalysts. This revised version was published online in July 2006 with corrections to the Cover Date.     

The adhesion between electrolessly deposited copper and a photoimageable polymer

We investigated the relationship between the peel adhesion of copper, deposited by electroless plating, to a photoimageable polymer and the time of chemical etching before plating. Mechanical interlocking is generally considered as being the adhesion mechanism between deposited metals and substrates. However, we found that the peel strength decreased with an increase in the etching time though the polymer roughness did not change. The glass transition temperature of the photoimageable polymer became lower as the etching time increased. The pretreatment not only roughened the surface of the photoimageable polymer, but also affected the bulk polymer and the adhesion.     

Very high temperature annealing effect on amorphous carbon films grown on refractory oxide substrates by pulsed laser deposition

We have carried out very high temperature heat treatment at 1400–2700 °C of about 10 nm-thick amorphous carbon thin films deposited on refractory substrates MgO, Al₂O₃, and yttria-stabilized zirconia (YSZ) using pulsed laser deposition techniques. After the annealing, a few nanometer scale sp² crystallization of the films and a large corrugation with a height of more than 1 μm were observed by Raman spectroscopy analysis and optical/atomic force microscopes, respectively. The corrugation is probably caused by the formation of gases at the film/substrate interface during the heat treatment.     

Experimental study on relationship between heat parameter and angular distortion

It is well known that weld residual stress and distortion should be controlled appropriately for structural integrity. Recently, it has become much more necessary to control weld distortion to highly improve manufacturing efficiency. Various studies on control of weld distortion had been conducted based on clarification of influential dominant factors for that. The influential dominant factors had been studied from a viewpoint of temperature distribution in plate thickness section. Without considering moving the weld heat source, the temperature distribution is controlled by weld heat input (Q_net) per weld length. Angular distortion, which is controlled by temperature distribution along the direction of plate thickness (h), is controlled by heat input parameter (Q_net/h²). However, it has recently become known that the conventional results cannot be applied to all welding processes because such processes are becoming more diversified. It is significant for more accurate control of angular distortion to investigate once again the relationship between the heat input parameter and angular distortion. In this study, a series of experiments on the relationship between heat input parameter and angular distortion are carried out. The effects of welding current and welding speed are investigated individually in both TIG and MAG welding. The difference between these welding methods is also investigated. Based on the result, the effects of them are discussed in relation to temperature distribution during welding. It is considered that angular distortion is affected by temperature distribution not only in plate thickness section but also along welding direction. So, angular distortion is not always controlled by only the conventional heat input parameter because the heat input parameter is proposed as the influential dominant factor for temperature distribution in plate thickness section. It is concluded that generation characteristics of inherent strain should be considered in relation to three-dimensional temperature distributions during welding for more accurate control of angular distortion.     

Photoelectrochemical decomposition of bio-related compounds at a nanoporous semiconductor film photoanode and their photocurrent-photovoltage characteristics

Photoelectrochemical decomposition of bio-related compounds such as amino acids was investigated with a biophotochemical cell comprising a mesoporous TiO₂ thin film photoanode and an O₂-reducing cathode. It was concluded that a kind of Schottky junction formed at the surface of the TiO₂ (called as liquid junction) induced the photodecomposition followed by generation of photocurrent/photovoltage. Complete photodecomposition was investigated by the CO₂ formation yield. The photocurrent-photovoltage (J-V) characteristics of amino acids and other typical bio-related compounds were investigated, and the short circuit photocurrent (J_sc), open circuit photovoltage (V_oc), and Fill factor (ff) were exhibited. Effect of pH on the photodecomposition of phenylalanine and cysteine were studied; for cysteine alkaline conditions gave a high efficiency, which was interpreted by the high electron-donating ability of the dissociated -S⁻ group. The incident light-to-current conversion efficiency (IPCE) of cysteine was 25% at 350 nm. It was for the first time shown that organic acids gave high internal quantum efficiency (η′) over 8 (=800%) in the photodecomposition; for oxalic acid it was 9.3 (=930%) and for butyric acid 8.2. The alternating current impedance spectroscopy of glycine showed that the cell performance is determined by the chemical reactions at TiO₂ or Pt electrodes.