Improved visible-light responsive photocatalytic activity of N and Si co-doped titanias

Thermal reaction of titanium tetraisopropoxide and tetraethyl orthosilicate in 1,4-butanediol afforded nanocrystalline silica-modified titanias having large surface area and superior thermal stability. In this study, the thus-obtained silica-modified titanias were treated in an NH₃ flow at high temperatures, and their physical and photocatalytic properties were investigated. Compared with NH₃-treated TiO₂ without silica modification, the NH₃-treated silica-modified titanias showed a stronger absorption in the visible region (400–500 nm) and had a larger peak at 396 eV in the N 1s XPS spectrum. These results indicate that a larger amount of nitrogen was stably doped in the silica-modified titania. The obtained products exhibited a high photocatalytic activity for degradation of Rhodamine B and decomposition of acetaldehyde under visible light irradiation. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Preparation and antibacterial activity of novel fluoroalkyl end-capped oligomers/silica nanocomposites-encapsulated low molecular biocides

Fluoroalkyl end-capped N-(1,1-dimethyl-3-oxobutyl)acrylamide oligomer [R_F-(DOBAA) _n -R_F] reacted with tetraethoxysilane (TEOS) and silica nanoparticles in the presence of low-molecular weight biocides such as hibitane, hinokitiol, and hinokioil under alkaline conditions to afford R_F-(DOBAA) _n -R_F/silica nanocomposites-encapsulated these biocides in excellent to moderate isolated yields. Fluoroalkyl end-capped N,N-dimethylacrylamide oligomer [R_F-(DMAA) _n -R_F] and acrylic acid oligomer [R_F-(ACA) _n -R_F]/silica nanocomposites-encapsulated hibitane were obtained under similar conditions. Dynamic light scattering measurements showed that the size of these fluorinated nanocomposites-encapsulated biocides thus obtained is nanometer size-controlled. Additionally, these fluorinated nanocomposites were shown to have a good dispersibility and stability in methanol and water. Of particular interest, these fluorinated nanocomposites-encapsulated biocides were found to have a good antibacterial activity against Staphylococcus aureus, and these nanocomposites were applied to the surface modification of traditional organic polymers such as poly(methyl methacrylate).     

Effects of different kind of sesame materials on the physical properties of gomatofu (sesame tofu)

Gomatofu (sesame tofu) is one of the traditional Japanese healthy foods and is representative of all shojin (vegetarian) dishes. Gomatofu, one of the mixed gels consisting of kudzu (arrowroot) starch and sesame, possesses an extremely unusual textural characteristic which is soft, smooth, and springy. The textural properties are greatly influenced by preparation, ingredients and roasting conditions of sesame seeds. Hence there are many kinds of sesame materials which can be used to prepare gomatofu such as white, black, huskless or not and roasted or unroasted sesame materials, in this study, the effects of these materials on the physical properties of gomatofu were studied. The sample of Ra-W prepared with unroasted huskless sesame seed had the least hardness, but mouthfeel of this sample were the highest. The samples of Ro-B and Ro-W prepared with roasted husk (black and white) sesame seed were evaluated to have the best palatability because of their superior springiness. It was clarified that different kinds of sesame materials affected the forming of structure and physical properties of gomatofu, because the chemical components were different from varieties of sesame materials.     

Modeling Tetrachloroethylene Decomposition in Photosonolysis Reactor

A mathematical model was developed for the decomposition of halogenated compounds in water and applied for tetrachloroethylene (PCE) in a flow-through photosonolysis reactor. To develop the model, a series of differential equations were formulated based on the principles of conservation of mass and mass action for hypothetical parent and daughter species, which were then solved analytically. The model sensitivity analysis was performed to determine if the model gives intuitive results. In support of the modeling effort, experiments were conducted. In a flow-through bench-scale reactor, simulated groundwater contaminated with PCE was irradiated with ultraviolet light and ultrasound concurrently in the presence of titanium dioxide (TiO2). The model was calibrated against the concentrations of PCE, trichloroethylene, methylene chloride, and chloride ion, obtained from the experiments. The proposition for the rate constants is based on fitting the model result to the experimental data. The model was further verified by comparing the model results against a different set of experimental data. The model results against available data indicated good agreement within experimental variations. The modeling suggests that PCE is more susceptible to the C-C double bond cleavage than the C-Cl bond cleavage. The results also support the assumptions that chlorinated methane compounds can be degraded at higher rates than chlorinated ethylene and that the values of the degradation rate constants increase with a decreasing number of chlorine atoms attached to the hydrocarbon compound.     

Hydrothermal corrosion of magnesiapartially-stabilized zirconia

Changes in the phase compositions and microstructures of magnesia-partially-stabilized zirconia (Mg-PSZ) were studied in water at 80–300 °C, 1 m HCl solutions at 80–140 °C and 1 m CH₃COOH-CH₃COONa buffer solutions at pH 3 and 80–140 °C for 10–40 days. The tetragonal to monoclinic phase transformation and the degradation of the fracture strength occurred in water above 200 °C. On the other hand, although no noticeable tetragonal to monoclinic phase transformation proceeded in 1 m HCl solutions and 1 m CH₃COOH-CH₃-COONa buffer solutions at pH 3 below 140 °C, the fracture strength of Mg-PSZ greatly degraded. The dissolution of Mg²⁺ ion was observed in water above 200 °C and in 1 m HCl solutions above 80 °C.     

Comparative antimycobacterial activities of the newly synthesized quinolone AM-1155, sparfloxacin, and ofloxacin

AM-1155 is a newly synthesized 6-fluoro-8-methoxy quinolone. We assessed its in vitro antimycobacterial activity using sparfloxacin (SPFX) and ofloxacin (OFLX) as comparison drugs. The MICs of these agents for various mycobacterial strains were determined by the agar dilution method with 7H11 medium. AM-1155 had lower MICs for 50 and 90% of tested strains of Mycobacterium kansasii, M. marinum, and M. fortuitum-M. chelonae complex than SPFX and OFLX, and the values for M. tuberculosis, M. scrofulaceum, and the M. avium-M. intracellulare complex were similar to those of SPFX and considerably lower than those of OFLX. In addition, the antimicrobial activity of AM-1155 against M. tuberculosis and M. intracellulare phagocytosed into murine peritoneal macrophages was compared with that of OFLX. AM-1155 (1 microgram/ml) inhibited the intracellular growth of both M. tuberculosis and M. intracellulare, whereas OFLX at the same concentration failed to show any such effect. Moreover, AM-1155 (10 micrograms/ml) exhibited a steady bactericidal action against M. tuberculosis, whereas OFLX at the same concentration had only a weak effect. AM-1155 (10 micrograms/ml) also inhibited the growth of M. intracellulare more effectively than OFLX.     

Study on the "signal" constituents for the evaluation of animal crude drugs. V. The "signal" constituents for the identification of Lumbricus in cold medicines

Cell death was analyzed in neurulating mouse embryos after in vivo doses of 2-methoxyethanol (2-ME) that produce anterior neural tube defects. Characterization of 2-ME-induced cell death was performed by evaluating: (1) vital fluorochrome staining in whole embryos applying confocal laser scanning microscopy; (2) characteristics of cell debris in conventional histological sections revealed by light microscopy; and (3) Apoptag in situ immunohistochemical staining for apoptosis using light microscopy. Methods for quantification of cell death identified by these three techniques were explored using computerized image analysis. Physiological cell death in control embryos primarily occurred in the neural crest region during neural fold elevation. Embryos exposed to 2-ME had expanded areas of cell death in the neural crest and also new areas of cell death in medial regions of the anterior neural tube. Both physiological and 2-ME-induced embryonic cell death had morphological, immunohistochemical, and fluorochrome staining characteristics of apoptosis. When fluorescence data from confocal microscopic analysis of vital fluorochrome-stained embryos were analyzed, a dose-dependent increase was found in embryos exposed to 2-ME. Similar results were obtained when cell death was analyzed in either conventional histological sections or sections prepared for immunohistochemical detection of apoptosis. The cell death data obtained in this study correlate with previously observed near-term malformation rates, suggesting that a quantitative relationship exists between 2-ME-induced embryonic cell death and neural tube defects.     

Analysis of course errors on CVOR antennas (including effects ofmutual coupling between elements)

A VHF omnidirectional radio range (VOR) is a navigation aid radio beacon facility, which provides aircraft with azimuth information relative to the VOR station in question as the origin. In Japan, two types of VOR-the conventional type (referred to as a CVOR) and the Doppler type (referred to as a DVOR)-are currently in use. An element known as the Alford loop antenna (ALA), which changes the loading reactance, is used for the VOR because the horizontally polarized wave and nondirectivity in the horizontal plane are preferred. A VOR antenna consists of a carrier antenna and a sideband antenna-an aircraft receives separate signals from these two antennas and compares them to obtain azimuth information. The mutual coupling between the elements forming the carrier and the sideband antenna affects the directivity of the single elements, resulting in errors in azimuth information. With the mutual coupling between the antenna elements being taken into consideration, a quantitative calculation was made by using the moment method-the results of the calculation made it clear that a loading reactance value of -320 Ω is better to make not mutually coupled elements nondirectional while a loading reactance value of -600 Ω is optimum to minimize the azimuth error of a CVOR