Immunomagnetic flow cytometric detection of staphylococcal enterotoxin B in raw and dry milk

A rapid and sensitive method for detection of staphylococcal enterotoxin B (SEB) in raw and dry milk samples with the use of antibody-based immunomagnetic separation (IMS) in conjunction with flow cytometry (FCM) was developed. Sheep anti-SEB immunoglobulin G (IgG) was immobilized on Dynabeads M-280. The SEB initially binds to the capturing antibody, which is bound on the magnetic beads. The rabbit anti-SEB IgG binds to the captured toxin and is further labeled with a Cy5-labeled goat anti-rabbit IgG antibody. The percentage of the beads that were fluorescent was measured by FCM. FCM was carried out for 1 min, and the data obtained were expressed as histograms for particle size (forward light scatter) and histograms for fluorescence intensity. A peak corresponding to the magnetic beads was clearly distinguished from a peak derived from contaminating particles in the sample solution. In the absence of SEB, about 10% of the beads emitted fluorescence. The percentage of fluorescent beads and the fluorescence intensity increased with increasing SEB concentrations. For this IMS-FCM assay, the lower limits of detection for SEB were estimated to be 0.01 and 0.25 ng/ml for buffer and milk samples, respectively.     

Studies on analysis of terpene resin in imported chewing gums

We have developed an analytical method for terpene resins in chewing gum. The fraction including terpene resins was prepared by means of hexane extraction and two silica gel column chromatography treatments (hexane and ethyl acetate) from chewing gum. The terpene resin fraction was analyzed with LC/MS and IR. The terpene resins are mixtures of polymeric pinene and/or limonene, which have a monomer molecular weight of 136. The MS spectrum of the terpene resin peak on the LC/MS total ion chromatogram showed protonated molecular ion (M + H)+ peaks at intervals of m/z 136, characteristic of a complex mixture of polyterpenes. IR spectroscopy is a suitable technique to identify the terpene resin type, ie., pinene or limonene. When the method was applied to imported chewing gum sold in Japan, terpene resins were clearly detected.     

用体硅微加工工艺实现的微纳电械系统

1　Ｉｎｔｒｏｄｕｃｔｉｏｎ　　ＭＥＭＳ (ＭｉｃｒｏＥｌｅｃｔｒｏＭｅｃｈａｎｉｃａｌＳｙｓｔｅｍ )ｂａｓｅｄｏｎｓｅｍｉｃｏｎｄｕｃｔｏｒｍｉｃｒｏｆａｂｒｉｃａｔｉｏｎｐｌａｙｓｉｍ ｐｏｒｔａｎｔｒｏｌｅｓｆｏｒｅｘａｍｐｌｅｉｎｔｈｅ ｐｅｒｉｐｈｅｒｙｏｆＩＴｓｙｓｔｅｍｓ.ＮＥＭＳ (ＮａｎｏＥｌｅｃｔｒｏＭｅｃｈａｎｉｃａｌＳｙｓ ｔｅｍ)ｃｏｎｔａｉｎｓｎａｎｏ＿ｓｃａｌｅｓｔｒｕｃｔｕｒｅｓ.Ｓｏｐｈｉｓｔｉｃａｔｅｄａｎｄｈｉｇｈｐｅｒｆｏｒｍａｎｃｅｓｙｓｔｅｍｓｂａｓｅｄｏｎｔｈ…     

Thermophysical properties of (U,Y)O2

We prepared polycrystalline pellets of (U,Y)O₂, containing YO_1.5 up to 11 mol.%. We performed indentation tests on the pellets, and evaluated the Young’s modulus and hardness. We measured the heat capacity and the thermal diffusivity, and evaluated the thermal conductivity. We succeeded in evaluating the effect of Y content on the thermophysical properties of (U,Y)O₂. We revealed that the Young’s modulus, hardness, and thermal conductivity of (U,Y)O₂ decreased with increasing the Y content.     

Polymerization of ethylene and propylene initiated by milled alumina powder

Generation of free radicals (mechano-radicals) by the milling of alumina powder at 77 K was demonstrated by ESR. After milling of alumina in the presence of ethylene (simultaneous milling) at 77 K, polyethylene-propagating radicals instead of the alumina mechano-radicals were detected by ESR. Also the contact of ethylene with the milled alumina converted alumina mechano-radicals into polyethylene propagating radicals at a temperature above the melting point of ethylene. The products extracted by hot toluene from the simultaneous milling were identified by IR to be polyethylene, and their molecular weights were roughly 10,000. The residues after the extraction were bonded with the alumina. Polypropylene was also produced by a similar method of milling of alumina in the presence of propylene. The obtained polyproylene was atactic, and its molecular weight was about 400.     

High-temperature pyrolysis of ceramic fibers derived from polycarbosilane–polymethylhydrosiloxane polymer blends with porous structures

The polymer blends of PCS (polycarbosilane) and PMHS-h (polymethylohydrosiloxane with high molecular weight) were prepared by freeze-drying process of mixed benzene solution. Melt viscosity, mass loss, and gas evolution from prepared polymer blends were analyzed. A polymer blend of HSah15 (15 mass% PMHS-h to PCS) was melt-spun to fiber form, curing by thermal oxidation and pyrolyzed at various temperatures up to 1773 K. The obtained fibers were investigated by tensile tests, FE-SEM (field emission scanning electron microscope) observation, and XRD (X-ray diffraction) analysis. After pyrolysis at 1273 K, there were no pores in the cross section of the fiber derived from pure PCS; however, there were amounts of pores in the cross sections of the fiber derived from HSah15. After pyrolysis at 1773 K, the coarse β-SiC (silicon carbide) crystals were formed on the outside surface of the fiber derived from pure PCS; however, no remarkable β-SiC crystal were formed on the outside surface of the fiber derived from HSah15.     

Remarkable enhancement in durability of Pd/H-ZSM-5 zeolite catalysts for CH4-SCR

Effect of second components on the catalytic performance of Pd/H-ZSM-5 zeolite (Pd: 0.4 wt.%) was evaluated by a durability test of NO reduction with CH₄ at a relatively high temperature of 500°C in the presence of water vapor for a prolonged period. The Pd/H-ZSM-5 showed high stable activity for this reaction without H₂O in the reactant feed, while immediate and irreversible deactivation was observed in the presence of H₂O, resulting in no activity after 7 h. The second components such as Co, Rh, Ag, Ce, and Fe introduced individually to the Pd/H-ZSM-5 enhanced the durability, and in particular the addition of 3.3 wt.% Co led to a stable NO conversion for more than 40 h in the presence of H₂O.