A simple approach to observe non-conductive hydrated materials with FE-SEM: Case study on porous hydroxyapatite green bodies

The purpose of this study is to develop a simple method to observe the surface morphology of non-conductive material in its hydrated condition. Here porous hydroxyapatite (HAp) green body prepared by gelcasting process was considered as a case study, and, the resultant body was subsequently treated with hydrophilic ionic liquid (IL). The surface morphology and the pore structure of the IL-treated porous HAp green body were successfully observed even in hydrated condition without any charging using field emission scanning electron microscope (FE-SEM). Results showed that the pore diameter from 300 to 600 μm in as-prepared green body was reduced to 100–300 μm in the sample sintered at 1000 °C. Raman results showed that the IL forms weak hydrogen bond with water molecules within the sample and, that prevents from drying in vacuum condition. In addition, the IL acts as a conducting media for HAp ceramics to be observed under FE-SEM.     

PZT-Polymer 1-3 Composite for High Resolution Ultrasonic Imaging

A novel process has been developed to construct PZT-polymer 1-3 micro composites for high-resolution ultrasonic imaging for medical diagnosis. The key technology is the lost silicon (Si) mold process, by which PZT micro-rod arrays have been successfully fabricated with the finest rod size being 7 μm, the highest aspect ratio exceeding 15. Such fine-scale high-aspect-ratio PZT structures, which are essential for realizing high imaging performance, have never been realized by any conventional technique.     

Osteoinduction by Functionally Graded Apatites of Bovine Origin Loaded with Bone Morphogenetic Protein-2

Bioresorbable and functionally graded apatites (fg-HAp) ceramics, which are characterized by gradations in crystallinity and the grain size of hydroxyapatite (HAp:Ca₁₀(PO₄)₆(OH)₂), were designed using bovine bone by the calcination and partial dissolution–precipitation method. The fg-HAp ceramics had macropores of 100–600 μm originated from spongy bone, and micropores of 10–160 nm. Fg-HAp ceramics loaded with recombinant human bone morphogenetic protein-2 (rhBMP-2/fg-HAp) were implanted into the subcutaneous tissue of rats. Eight weeks after the implantation, the surface and bulk degradations of the fg-HAp-containing body fluid occured, and small pieces of fg-HAp were incorporated into the induced bone and fatty marrow, suggesting that osteoinduction occurred in conjunction with bone remodeling. The rhBMP-2/fg-HAp ceramics developed could become a resorbable biomimetic material with fast bioresorption and osteoinduction characteristics.     

Thermal and electrical properties of perovskite-type strontium molybdate

Polycrystalline samples of perovskite-type strontium molybdate, SrMoO₃, have been prepared and the thermal and electrical properties have been measured from room temperature to about 1000 K. The electrical resistivity is of an order of magnitude of 10⁻⁵ to 10⁻⁶ (Ω m) in the whole temperature range. The Seebeck coefficient is around 4–9 μV K⁻¹. At room temperature, the thermal conductivity is about 30 W m⁻¹ K⁻¹, and it decreases with increasing temperature.     

Deep Reactive Ion Etching of Lead Zirconate Titanate Using Sulfur Hexafluoride Gas

A deep reactive ion etching (RIE) technique that uses sulfur hexafluoride (SF₆) gas has been developed for lead zirconate titanate (Pb(Zr,Ti)O₃, PZT) three-dimensional microfabrication from PZT ceramic blocks. The etching was performed by using an inductively coupled plasma that was generated in a narrow-gap vacuum chamber. The etch depth was 70 µm with a maximum etch rate of 0.3 µm/min and a selectivity of PZT to the electroplated nickel mask of >35:1. The sidewalls of the PZT structures were tapered, with base angles of ∼75°. Both positive RIE lag and unexpected ultrafine-slit etching phenomena were observed.     

GaN-based optoelectronic devices on sapphire and Si substrates

A recessed gate AlGaN/GaN high-electron mobility transistor (HEMT) on sapphire (0 0 0 1), a GaN metal-semiconductor field-effect transistor (MESFET) and an InGaN multiple-quantum well green light-emitting diode (LED) on Si (1 1 1) substrates have been grown by metalorganic chemical vapor deposition. The AlGaN/GaN intermediate layers have been used for the growth of GaN MESFET and LED on Si substrates. A two-dimensional electron gas mobility as high as 9260 cm²/V s with a sheet carrier density of 4.8×10¹² cm⁻² was measured at 4.6 K for the AlGaN/GaN heterostructure on the sapphire substrate. The recessed gate device on sapphire showed a maximum extrinsic transconductance of 146 mS/mm and a drain–source current of 900 mA/mm for the AlGaN/GaN HEMT with a gate length of 2.1 μm at 25°C. The GaN MESFET on Si showed a maximum extrinsic transconductance of 25 mS/mm and a drain–source current of 169 mA/mm with a complete pinch-off for the 2.5-μm-gate length. The LED on Si exhibited an operating voltage of 18 V, a series resistance of 300 Ω, an optical output power of 10 μW and a peak emission wavelength of 505 nm with a full-width at half-maximum of 33 nm at 20 mA drive current.     

日本污水处理构筑物钢筋混凝土结构的腐蚀及防护

针对污水处理系统中的混凝土构筑物受到的各种腐蚀介质的侵蚀问题,从腐蚀的机理、对策、抑制技术,防腐技术、工法等方面,介绍日本在此领域的技术、经验及做法。     

Inhibitory effects of flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu) on antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells

We found that two distinct flavonoid glycosides isolated from the peel of Japanese persimmon (Diospyros kaki Fuyu), isoquercitrin (Isq) and hyperin (Hyp), are capable of inhibiting antigen-stimulated degranulation in rat basophilic leukaemia RBL-2H3 cells. In order to elucidate the underlying mechanisms, we examined effects of Isq and Hyp on cellular responses induced by antigen stimulation. Treatment with both Isq and Hyp markedly inhibited antigen-stimulated elevation of intracellular free Ca²⁺ concentration and reactive oxygen species (ROS). Isq and Hyp did not affect NADPH oxidase (NOX) activity, but they possessed DPPH radical-scavenging activity similar to that of epigallocatechin gallate, a potent anti-oxidant, Finally, Isq and Hyp showed little or no effects on Ag-stimulated Syk activation or phosphorylation of signalling molecules. These results indicate that inhibition of antigen-stimulated degranulation by Isq and Hyp is mainly due to suppression of intracellular Ca²⁺ elevation, which is caused by direct scavenging of ROS that are generated by NOX. Our findings suggest that Isq and Hyp, isolated from the peel of persimmon, would be beneficial for alleviating symptoms of type I allergy.     

Effects of Fruiting Bodies of Basidiomycetes on Yeast Growth Rates

The effects of edible fruiting of Basidiomycetes on growth of Saccharomyces cerevisiae and other yeast strains were examined. The growth rates were significantly increased in the presence of fruiting bodies but there was no significant difference growth yield between cultures with and without fruiting bodies. Growth rates of yeast cells were promoted in both synthetic and natural media.     

A system for synchronizing the nods of a CG character and a human using thermal image processing and a moving-average model

The purpose of this study was to develop a system for communication between a human and a computer generated (CG) character to make him or her more peaceful and cheerful. Nonverbal communication using such things as facial expression, a nod, or a hand gesture is very important for reciprocal communication between humans. In this study, an image registered by infrared rays which describes the thermal distribution of the face and neck has been used to develop a system for communication between a human and a CG character. The CG character can synchronize its nod with a person’s nod by predicting his or her nod angle. The measured feature parameter is input to a fuzzy algorithm system to obtain the nod angle of a person in front of an infrared camera, and then a moving-average model is used to predict the nod angle of the person. The average error of the nod angle obtained by the system has been estimated as about 5°. The CG character nods its head, not only when the human nods his or her head, but also when the human shakes his or her head to the left or right.