The effects of air pollution and climatic factors on atmospheric corrosion of marble under field exposure

The atmospheric corrosion of marble was evaluated in terms of SO₂ concentration as air pollution and climatic factors such as rainfall, relative humidity, temperature and so on under the field exposure. Marble of calcite type (CaCO₃) was exposed to outdoor atmospheric environment with and without a rain shelter at four test sites in the southern part of Vietnam for 3-month, 1- and 2-year periods from July 2001 to September 2003. The thickness loss of marble was investigated gravimetrically. X-ray diffraction and X-ray fluorescent methods were applied to study corrosion products on marble. The corrosion product of marble was only gypsum (CaSO₄ · 2H₂O) and was washed out by rain under the unsheltered exposure condition. It was found that the most substantial factors influencing the corrosion of marble were rainfall, SO₂ concentration in the air and relative humidity. Based on the results obtained, we estimated the dose-response functions for the atmospheric corrosion of marble in the southern part of Vietnam.     

Effect of thermal annealing on electrical degradation characteristics of Sb–Bi–Mn–Co-added ZnO varistors

The effects of thermally annealing Bi–Mn–Co–Sb₂O₃-added ZnO varistors on their electrical degradation were investigated. For the samples added with 0.01 mol% Sb₂O₃ and without Sb₂O₃, no marked difference in the nonlinearity index α of the voltage–current (V–I) characteristics was observed upon electrical degradation for the annealed and nonannealed samples. Upon increasing the amount of Sb₂O₃ added, the values of α increased after electrical degradation for the annealed samples. Moreover, the value of α after electrical degradation was proportional to the width of gauss function (width) of the X-ray diffraction peak for Zn_2.33Sb_0.67O₄-type spinel particles under various annealing conditions. The added Sb₂O₃ did not dissolve in the ZnO grains but became segregated at grain boundaries. Therefore, it is speculated that the increase in the width of the spinel particles is due to the increase in the numbers of fine spinel particles at grain boundaries and triple points. Furthermore, it is suggested that the improvement of the electrical degradation is due to the decrease in the mobility of oxide ions or Zn²⁺ ions owing to their being blocked by uniformly dispersed fine spinel particles at grain boundaries.     

Effect of heating process on the formation of nanoparticles of elastin model polypeptide, (GVGVP)251, by gamma-ray crosslinking

Nanoparticles were prepared by the thermosensitive aggregation of the elastin model polypeptide, (GVGVP)₂₅₁, and gamma-ray crosslinking. Three different heating processes, “slow heating,” “fast heating,” and “heat shock,” were used for the aggregation of the peptide, followed by gamma-ray crosslinking. Only the “heat shock” process successfully yielded stable nanoparticles with diameters of less than ca. 150 nm and a narrow size distribution. Circular dichroism (CD) spectrometry showed that this polypeptide formed a type-II β-turn structure when the temperature was increased to above the cloudy point in the case of the “heat shock” process; suggesting that this structure might contribute to stable nanoparticle formation by gamma-rays. CD spectrometry also suggested that this structure would be affected during the formation of stable crosslinked particles.     

Effect of molecular weight on molecular orientation and morphology of polypropylene sheets containing a β-nucleating agent

In this study, polypropylene (PP) films containing the β nucleating agent, N,N′-dicyclohexyl-2,6-naphthalenedicarboxamide, were prepared using PP with three different molecular weights (low, medium, and high) by extrusion process with T-shaped die. The structure and morphology of the films were studied after stretching. It was found that a unique molecular orientation, in which both the c-axis and crystalline lamellae were oriented perpendicular to the flow direction, was formed in all undrawn film samples, irrespective of the molecular weights of the PP. In the PP sheets stretched in the machine direction, the low-molecular-weight sample containing the nucleating agent exhibited brittle properties owing to a lack of tie chains in the stretching direction. In contrast, cavitation was prominent in the medium (M-PP)- and high (H-PP)-molecular-weight samples. Notably, M-PP containing the nucleating agent, with a high degree of molecular orientation, promoted the formation of a large number of voids. In H-PP containing the nucleating agent, the presence of numerous tie chains inhibited cavitation, resulting in fewer voids. The experimental results demonstrated the influence of the molecular weight on the void structure, which will be useful in the field of microporous membranes.     

Sequential exposure of porcine cumulus cells to FSH and/or LH is critical for appropriate expression of steroidogenic and ovulation-related genes that impact oocyte maturation in vivo and in vitro

In this study, we collected follicular fluid, granulosa cells, and cumulus cells from antral follicles at specific time intervals following equine chorionic gonadotropin (eCG) and human chorionic gonadotropin (hCG) treatment of gilts. The treatment with eCG increased the production of estrogen coordinately with up-regulated proliferation of granulosa and cumulus cells. eCG also induced the expression of LHCGR and PGR in cumulus cells and progesterone accumulation was detected in follicular fluid prior to the LH/hCG surge. Moreover, progesterone and progesterone receptor (PGR) were critical for FSH-induced LHCGR expression in cumulus cells in culture. The expression of LHCGR mRNA in cumulus cells was associated with the ability of LH to induce prostaglandin production, release of epidermal growth factor (EGF)-like factors, and a disintegrin and metalloprotease with thrombospondin-like repeats 1 expression, promoting cumulus cell oocyte complexes (COCs) expansion and oocyte maturation. Based on the unique expression and regulation of PGR and LHCGR in cumulus cells, we designed a novel porcine COCs culture system in which hormones were added sequentially to mimic changes observed in vivo. Specifically, COCs from small antral follicles were pre-cultured with FSH and estradiol for 10 h at which time progesterone was added for another 10 h. After 20 h, COCs were moved to fresh medium containing LH, EGF, and progesterone. The oocytes matured in this revised COC culture system exhibited greater developmental competence to blastocyst stage. From these results, we conclude that to achieve optimal COC expansion and oocyte maturation in culture the unique gene expression patterns in cumulus cells of each species need to be characterized and used to increase the effectiveness of hormone stimulation.     

TWO-CRACK PROPAGATION PATHS IN A FUNCTIONALLY GRADED MATERIAL PLATE SUBJECTED TO THERMAL LOADINGS

Two-crack propagation paths in a ceramic/metal functionally graded material plate (FGP) under one-cycle temperature change of heating and cooling are considered. When the FGP is subjected to thermal shock, a single crack or multiple cracks often initiate on the ceramic surface during the cooling process and propagate in the FGP. Crack paths are influenced by the heating temperature conditions, a compositional profile of the FGP, the fracture toughness, interaction among multiple cracks, and so on. Transient thermal stresses are treated as a linear quasi-static thermoelastic problem for a plane-strain state. The crack paths are treated under fracture mechanics using the finite-element method. The effects of heating temperature conditions, a compositional profile of the FGP, the fracture toughness, and a crack space on the crack propagation pattern are discussed and are shown in figures.     

Staged combustion properties for pulverized coals at high temperature

Staged combustion properties for pulverized coals have been investigated by using a new-concept drop-tube furnace. Two high-temperature electric furnaces were connected in series. Coal was burnt under fuel-rich conditions in the first furnace, then, staged air was supplied at the connection between the two furnaces. Reaction temperature (1800–2100 K) and time (1–2 s) were similar to those used in actual boilers. When coal was burnt at the same stoichiometric ratio as in actual boilers, similar combustion performance values as for actual boilers were obtained regarding NO_x emission and carbon in ash. The most important factor for low NO_x combustion was to raise the combustion temperature above the present range (1800–2100 K) in the fuel-rich zone. The NO_x emission was significantly increased with decrease of burning temperature in the fuel-rich zone when the temperature was lower than 1800 K. But, NO_x emission was cut to around 100–150 ppm, for sub-bituminous coal and hv-bituminous coal, in the latest commercial plants by forming this high-temperature fuel-rich region in the boilers. If the temperature and stoichiometric ratio could be set to the most suitable conditions, and, burning gas and air were mixed well, it would be possible to lower NO_x emission to 30–60 ppm (6% O₂). The most important NO_x reduction reaction in the fuel-rich zone was the NO_x reduction by hydrocarbons. The hydrocarbon formation rate in the flame was varied with coal properties and combustion conditions. The NO_x was easily reduced when coals which easily formed hydrocarbons were used, or, when burning conditions which easily formed hydrocarbons were chosen. Effects of burning temperature and stoichiometric ratio on NO_x emission were reproduced by the previously proposed reaction model. When solid fuel was used, plant performance values varied with fuel properties. The proposed drop-tube furnace system was also found to be a useful analysis technique to evaluate the difference in combustion performance due to the fuel properties.     

Effect of treatment of activated carbon fiber cloth electrodes with cold plasma upon performance of electric double-layer capacitors

Charge/discharge behavior of electric double-layer capacitors composed of activated carbon fiber cloth (ACFC) electrodes and an organic electrolyte was investigated. The modification of the ACFC electrodes was performed using cold plasma generated in argon-oxygen atmosphere. The effect of the cold plasma treatment of the ACPC electrodes on the capacitor performance was discussed on the basis of the physical and chemical properties of the ACFC surface such as pore radius distribution and surface atom concentration.     

Experimental investigation of falling film evaporation on horizontal tubes

This paper presents the results of an experimental investigation relating to heat transfer during evaporation of thin liquid films falling over horizontal tubes. Experiments were conducted using 25 mm o.d. copper tubes heated by internal electrical cartridge heaters so that a uniform heat flux was generated on the outside tube surface. Five heated tubes were arrayed on a vertical plane with a pitch of 50 mm. Freon R-11 preheated to the saturation temperature at 0.2 MPa was supplied to the topmost heated tube through feeding tubes. Heat transfer characteristics on each heated tube were clarified in a range of film Reynolds number from 10 to 2000 and the measured data are presented in the form of correlations. Deterioration of heat transfer due to film break down was also considered. © 1999 Scripta Technica, Inc. Heat Trans Jpn Res, 27(8): 609–618, 1998     

各种引气剂以及抑泡剂对混凝土经时变化状态等的影响

众所周知,采用粉煤灰制备混凝土,因粉煤灰成分中含有未燃炭等微粒子,容易造成阴离子型引气剂吸附在这些微粒子上,导致含气量经时损失.同时在混凝土的制备、运输过程中,因受采用的材料、拌和状态等物理因素影响,还会发生含气量经时增加的现象.所以在制备、管理混凝土时,如何保证出机初期一定的含气量、缓解含气量的经时损失或经时增加,是一项极其关键的技术.本文将就采用能改善上述状态的引气剂、抑泡剂拌和混凝土,对混凝土的经时变化以及抗冻融性等特征产生的影响进行论述.