The synergy between multi-wall carbon nanotubes and Vulcan XC72R in microporous layers

In this study, the effects of the addition of multi-wall carbon nanotubes (MWCNTs) into a microporous layer (MPL) containing Vulcan XC72R on the oxygen reduction reaction (ORR) were studied. We tested various percentages of MWCNTs and Vulcan XC72R in the MPLs of gas-diffusion electrodes (GDEs) with various Pt loadings in the catalyst layer. The performance of the ORR in the electrodes was studied with linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), and chronoamperometry. The structures of the MPLs were investigated by using scanning electron microscopy (SEM), mercury porosimetry (MP), and gas permeability. In addition, the optimum polytetrafluoroethylene (PTFE) content of the MPL was determined. Our results indicate that the performances of the GDEs are optimal under the following conditions: (a) 60 wt% MWCNTs and 40 wt% Vulcan XC72R with a Pt loading of 0.115 mg/cm²; (b) 80 wt% MWCNTs and 20 wt% Vulcan XC72R with a Pt loading of 0.5 mg/cm²; and (c) 40 wt% MWCNTs and 60 wt% Vulcan XC72R with a Pt loading of 1 mg/cm².     

Paper-based laminates produced with kraft lignin-rich phenol–formaldehyde resoles meet requirements for outdoor usage

Suitability of lignin–phenol–formaldehyde (LPF) resoles was investigated for manufacturing paper-based high-pressure laminates. As lignin source, pine kraft lignin and spruce sodium lignosulfonate were compared, substituting 40 wt% of phenol by lignin in each case. The synthesized resins were characterized for their viscosity development, solid content, pH, free formaldehyde as well as free phenol content and B-time. Paper-based high-pressure laminates were manufactured using the two different resins. The laminates were exposed to different test climates and were compared for boiling water resistance, thickness swelling, bending properties and impact energy. The results indicate that pine kraft lignin performs superior to spruce sodium lignosulfonate for utilization in paper based laminates for outdoor usage due to a lower affinity of the pine kraft LPF laminates to water.     

Fuzzy modeling of the forced convection heat transfer from a V‐shaped plate exposed to an air slot jet

This paper focuses on the application of fuzzy logic (FL) to predict the forced convection heat transfer from V‐shaped plate internal surfaces exposed to an air impingement slot jet. The aim of the present paper is to consider the effects of the angle of a V‐shaped plate (Φ), slot‐to‐plate spacing ratio (Z/W), and Reynolds number (Re) variation on average heat transfer from the V‐shaped plate internal surfaces. The data used for developing the FL structure was obtained experimentally by a Mach‐Zehnder interferometer. The proposed FL was developed using MATLAB functions. It was observed that the average Nusselt number will be decreased with an increase in jet spacing and be increased with an increase in Reynolds number and angle of V‐shaped plate. Moreover, it is also shown that fuzzy logic is a powerful technique to use for predicting heat transfer due to its low error rate. The average error of the fuzzy predictions compared with experimental data was found to be 0.33% for this study. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21009     

Nitrogen-doped graphene-supported zinc sulfide nanorods as efficient Pt-free for visible-light photocatalytic hydrogen production

Nitrogen-doped graphene-ZnS composite (NG-ZnS) was synthesized by thermal treatment of graphene-ZnS composite (G-ZnS) in NH₃ medium. In the second step, the as-synthesized samples were deposited on indium tin oxide glass (ITO) by electrophoretic deposition for photocatalytic hydrogen evolution reaction. The as-prepared NG-ZnS-modified ITO electrode displayed excellent photocatalytic activity, rapid transient photocurrent response, superior stability and high recyclability compared to the pure ZnS and G-ZnS-modified ITO electrode due to the synergy between the photocatalytic activity of ZnS nanorods and the large surface area and high conductivity of N-graphene.     

Thermal environment effects on wave dispersion behavior of inhomogeneous strain gradient nanobeams based on higher order refined beam theory

In this article, an analytical model for the wave propagation analysis of inhomogeneous functionally graded (FG) nanobeam in thermal environment is developed based on nonlocal strain gradient theory, in which the stress accounts for not only the nonlocal elastic stress field but also the strain gradients stress field. The nanobeam is modeled through a higher order shear deformable refined beam theory which has a trigonometric shear stress function. The temperature field supposed to have a nonlinear distribution across the nanobeam thickness. Temperature-dependent material properties of nanobeams are spatially graded based on Mori–Tanaka model. The governing equations of the temperature-dependent functionally graded (FG) nanobeam are derived using the Hamilton’s principle. Numerical examples show that the characteristics of the wave propagation of FG nanobeam are influenced by various parameters such as nonlocality parameter, length scale parameter, gradient index, and temperature changes.     

Damping vibration behavior of visco-elastically coupled double-layered graphene sheets based on nonlocal strain gradient theory

Microsystem Technologies - This paper develops a nonlocal strain gradient plate model for damping vibration analysis of visco-elastically coupled double-layered graphene sheets. For more accurate...     

A comparative study to assess structure–properties relationships in (acrylonitrile butadiene rubber)‐based composites: Recycled microfillers versus nanofillers

This paper reports on the reinforcing effects of different types of fillers, namely, nanoclay (NC), micron size calcium carbonate (MCC), and micron size recycled powder coating waste (MPCW), on the ultimate properties of acrylonitrile butadiene rubber (NBR) compounds. The microcomposites and nanocomposites were characterized by X‐ray diffraction and scanning electron microscopy, implying enlargement of d‐spacing of NC or intercalation of NBR chains and formation of exfoliated structure, while some agglomerates of MCC were detected. Curing characteristics of the studied composites showed that incorporation of the fillers into the NBR, in particular the NC, causes an increase in the torque, indicating a higher degree of crosslinking. Furthermore, different from micron size MPCW and MCC, the NC accelerated the vulcanization reaction. It was also found that the use of NC and MPCW results in a remarkable increase in the mechanical and rheological properties compared with pure NBR. All in all, variations in the aforementioned criteria were attributable to the extent of matrix/filler interaction reflected by scanning electron micrographs. The correlation established between the microstructure and characteristics of the prepared NBR composites can shed some light on how to develop composites with enhanced properties by incorporating waste materials into the polymers. J. VINYL ADDIT. TECHNOL., 23:13–20, 2017. © 2015 Society of Plastics Engineers     

Wave dispersion characteristics of orthotropic double-nanoplate-system subjected to a longitudinal magnetic field

Microsystem Technologies - This article deals with the wave propagation problem of nanosize double-layered plates while subjected to a longitudinal magnetic field. To achieve more reliable answers,...     

Critical pitting temperature dependence of 2205 duplex stainless steel on dichromate ion concentration in chloride medium

In this study, the influence of various concentrations of dichromate and chloride ions on critical pitting temperature (CPT) of duplex stainless steel 2205 (DSS 2205) is investigated by employing potentiodynamic and potentiostatic CPT measurement methods. Potentiostatic results indicate that by adding 0.01 M to 0.1 M NaCl solution the CPT raised by 12 °C. Based on potentiodynamic CPT measurements in the solutions with ratio equal to one for solutions containing 0.1 M NaCl + 0.1 M and 0.01 M NaCl + 0.01 M , no CPT was detected up to 75 °C.