Effects of antibiotic regimens on the fecal shedding patterns of pigs infected with salmonella typhimurium

An experiment was conducted to determine (i) the effects of antibiotic regimens on the shedding patterns of pigs infected with Salmonella Typhimurium and (ii) whether antibiotic resistance increases the incidence of pathogen shedding. The experiment involved 48 50-day-old pigs challenged with Salmonella Typhimurium and receiving one of four antibiotic regimens including (i) intramuscular injection of ceftiofur sodium followed by inclusion of oxytetracycline in the feed; (ii) apramycin in the feed for 14 days followed by oxytetracycline; (iii) carbadox in the feed until pigs reached 35 kg followed by oxytetracycline; (iv) no antibiotics (control). Fecal samples were collected preinoculation, 2 and 4 days postinoculation (DPI) and at weekly and biweekly intervals thereafter to determine shedding patterns. Salmonella Typhimurium isolates from 2, 4, 7, 21, 42, and 70 DPI were analyzed for antibiotic resistance. A time effect (P < 0.05) was observed, indicating that the proportion of isolates resistant to at least one antibiotic varied over time. Overall resistance was determined to be 46% at 2 DPI and increased significantly (P < .05) thereafter. Treatment x time and antibiotic x time interactions were also observed (P < 0.05) as the percentage of isolates resistant to each test antibiotic increased over time. In no case did the development of antibiotic resistance result in an increased incidence of shedding of the original inoculate. The incidence of shedding was reduced in pigs receiving the apramycin-oxytetracycline treatment, when compared to control pigs; however, no differences were observed between antibiotic treatments.     

Competition of thermally injured listeria monocytogenes with a mesophilic lactic acid starter culture in milk for various heat treatments

Overnight tryptose broth cultures of three L monocytogenes strains were combined, centrifuged, suspended in 200 ml of tryptose phosphate broth, and heated at 56 degrees C for 20 min and at 64 degrees C for 2 min to obtain low-heat-injured (LHI) and high-heat-injured (HHI) cells, respectively, showing >99.6% injury. Flasks containing 200 ml of raw, low-heat-treated (56 degrees C for 20 min), high-heat-treated (64 degrees C for 2 min), pasteurized, and ultrahigh-temperature (UHT) milk were tempered to 31.1 degrees C and inoculated to contain 10(4) to 10(6) CFU/ml of LHI, HHI, or healthy L. monocytogenes cells and a commercial Lactococcus lactis subsp. lactis-Lactococcus lactis subsp. cremoris starter culture at levels of 0.5, 1.0, and 2.0%. Numbers of healthy and injured L. monocytogenes cells and starter organisms were determined using tryptose phosphate agar with or without 4.0% NaCl at selected intervals during 24 h of incubation at 31.1 degrees C. The presence of L. monocytogenes did not adversely affect the growth of the starter culture at any inoculation level. Overall, L. monocytogenes survived the 24-h fermentation period and grew to some extent. In starter-free controls. 76 to 81% of LHI cells and 59 to 69% of HHI cells were repaired after 8 h of incubation, with the lowest repair rates being observed for raw rather than heat-treated or pasteurized milk. Increased injury was observed for healthy L. monocytogenes cells at the 1.0 and 2.0% starter levels, with less injury seen for LHI and HHI cells. Raw and subpasteurized milk allowed less of a decrease in the percentage of injury and also showed higher numbers of injured cells than did pasteurized and UHT milks. These findings may have important implications for the survival of Listeria spp. in certain cheeses that can be prepared from raw or heat-treated milk.     

Thermal conductivity and thermal diffusivity analyses of low-density polyethylene composites reinforced with sisal, glass and intimately mixed sisal/glass fibres

The thermal conductivity and thermal diffusivity of sisal-reinforced polyethylene (SRP), glass-reinforced polyethylene (GRP) and sisal/glass hybrid fibre-reinforced polyethylene (GSRP) has been evaluated at cryogenic to high temperature (120–350 K). It has been observed that the variation of thermal conductivity with temperature is almost the same for LDPE and SRP containing perpendicularly oriented sisal fibres. The difference between the values of thermal conductivity shown by LDPE and GRP is greater than that of SRP and LDPE. The enhanced thermal conductivity of glass fibre is due to the presence of Fe²⁺ ions in the glass fibres. The linear variation in thermal conductivity with fibre loading is explained with the help of a model suggested by Agari. The difference between the thermal conductivity properties in directions parallel and perpendicular to the applied flux is a maximum for SRP owing to the anisotropic nature of sisal fibre. The difference is marginal for GRP on account of its isotropic nature. The position of GSRP is found to be intermediate. It can been observed that the variation of thermal diffusivity with temperature is just opposite to that of thermal conductivity. This may be due to a reduction in the mean free path of phonons. An empirical equation is derived to explain the variation in thermal conductivity and thermal diffusivity with temperature.     

Synthesis and anti-bacterial activity of novel dihydrochromeno[8,7-e][1,3]oxazine-2(8H)-thiones

A novel series of sulfur-containing dihydrochromeno[8,7-e][1,3]oxazine-2(8H)-thiones has been synthesized through an eco-friendly Mannich-type condensation cyclization reaction of 7-hydroxy-4-methyl-2-thiocoumarin or 6-chloro-7-hydroxy-4-methyl-2-thiocoumarin with formaldehyde and primary amines in water at 80–90°C for 2 h. All the synthesized compounds were screened for their in vitro anti-bacterial efficacy against two Gram-positive and three Gram-negative bacterial strains by using the disc diffusion method. The compound (8c) was found to be most potent with the zone of inhibition of 16 and 15 mm against Staphylococcus aureus ATCC 2937 and Klebsiella pneumoniae ATCC 31488, respectively.     

Phenolic‐epoxy matrix curable by click chemistry—synthesis,curing, and syntactic foam composite properties

Alkyne functional phenolic resin was cured by azide functional epoxy resins making use of alkyne‐azide click reaction. For this, propargylated novolac (PN) was reacted with bisphenol A bisazide (BABA) and azido hydroxy propyloxy novolac (AHPN) leading to triazole‐linked phenolic‐epoxy networks. The click cure reaction was initiated at 40–65°C in presence of Cu₂I₂. Glass transition temperature (Tg) of the cured networks varied from 70°C to 75°C in the case of BABA‐PN and 75°C to 80°C in the case of AHPN‐PN. DSC and rheological studies revealed a single stage curing pattern for both the systems. The cured BABA‐PN and AHPN‐PN blends showed mass loss above 300°C because of decomposition of the triazole rings and the novolac backbone. Silica fiber‐reinforced syntactic foam composites derived from these resins possessed comparable mechanical properties and superior impact resistance vis‐a‐vis their phenolic resin analogues. The mechanical properties could be tuned by regulating the reactant stoichiometry. These low temperature addition curable resins are suited for light weight polymer composite for related applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41254.     

Hydroisomerization of n-hexadecane over Brønsted acid site tailored Pt/ZSM-12

Hydroisomerization of n-hexadecane is performed over ZSM-12 framework having tailored Brønsted acidity to investigate the effect in terms of product selectivity and yield. For this purpose, pure phase of ZSM-12 (bulk molar ratio Si/Al ~ 60) has been synthesized using TEABr as a structure directing agent. The framework Brønsted acidity is tailored with group II elements (M) viz. Ca, Ba and Mg, by means of ion-exchange method. The samples so prepared have been characterized for phase purity, textural parameters, morphology by employing powder X-ray diffraction, nitrogen adsorption–desorption isotherm measurement at 77 K, and scanning electron microscopy technique, respectively. Similarly, % metal exchange is estimated using inductively coupled plasma technique. The quantification of Brønsted acidity for H⁺–M⁺⁺–ZSM-12 samples has been estimated by means of ammonia temperature programmed desorption (NH₃-TPD) and Fourier transform infrared spectroscopy of ammonia (NH₃-FTIR). The well characterized H⁺–M⁺⁺–ZSM-12 samples were loaded with Platinum (Pt, 0.5 wt%) and subjected to hydroisomerization of n-hexadecane using an up-flow fixed bed reactor to verify the effect of process parameters like temperature and WHSV. Pt/H⁺–Ba²⁺–ZSM-12 with tailored Brønsted acidity in the range of about 25 % demonstrated the optimum performance among all the catalysts with an increased isomer selectivity and yield (89.2 and 80.3 %, respectively) by about 4 wt% at a conversion level of about 90 % compared to Pt/H⁺–ZSM-12 framework at 568 K. Such enhancement in isomer selectivity and yield is found to be significant from commercial application point of view. Based on the obtained trend, the potential benefits of implementation of Pt/H⁺–Ba²⁺–ZSM-12 (bulk molar ratio Si/Al ~ 60) framework for cold flow property improvement of ‘bio-ATF’ have been envisaged.     

Encapsulation and controlled release in polyacrylamide hydrogels

A novel host–guest system was developed by the encapsulation of simple organic guest molecules in the hydrophilic molecular architecture of crosslinked polyacrylamide hydrogels. The crosslinking agents used for the preparation of the host systems were hexanediol dimethacrylate (HDDMA) and divinyl benzene (DVB). This enabled us to construct hydrogels with different hydrophobic–hydrophilic equilibria. The model guest system used for the studies was benzoic acid. The selections gave simple but excellent host–guest systems with fine polar–apolar balancing. Polyacrylamide hydrogels with encapsulated benzoic acid were prepared with varying crosslink densities (5, 10, 15, and 20 mol %) by the solution polymerization technique. The rate of release of the host from the host–guest assembly was studied in different swelling conditions. The rate of release depended on the interaction forces between the polymer and the solvents. Polar forces, dispersion forces, and hydrogen bonding all played a vital role. The swelling behavior of the host‐polymer system and the host–guest assembly was analyzed and compared by the Flory–Rehner method. The amount of benzoic acid encapsulated in the DVB‐crosslinked polymer was higher than in the HDDMA‐crosslinked polymer, and the rate of release was in the order 5 > 15 > 10 > 20% for the DVB‐crosslinked polymer. The rate of release for the HDDMA‐crosslinked host–guest assembly was in the order 10 > 5 > 15 > 20%. These results were in excellent agreement with those of the Flory–Rehner analysis of the swelling properties. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1816–1824, 2004     

High performance HTLNR/epoxy blend—Phase morphology and thermo-mechanical properties

An attempt was made to toughen diglycidyl ether of bisphenol A (DGEBA) type epoxy resin with liquid natural rubber possessing hydroxyl functionality (HTLNR). Epon 250 epoxy monomer is cured using nadic methyl anhydride as hardener in presence of N, N dimethyl benzyl amine as accelerator. HTLNR of different concentrations up to 20 wt % is used as modifier for epoxy resin. The addition HTLNR to an anhydride hardener/epoxy monomer mixture has given rise to the formation of phase-separated structure, consisting of small spherical liquid natural rubber particles bonded to the surrounding epoxy matrix. The particle size increased with increase in rubber content. The viscoelastic properties of the blends were analyzed using dynamic mechanical thermal analysis. The T_g corresponding to epoxy rich phase was evident from the dynamic mechanical spectrum, while the T_g of the rubber phase was overlapped by the β relaxation of epoxy phase. Glass transition of the epoxy phase decreased linearly as a function of the amount of rubber. The mechanical properties such as impact and fracture toughness were also carefully examined. The impact and fracture toughness increase with HTLNR content. A threefold increase in impact strength was observed with 15 wt % HTLNR/epoxy blend. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Asking questions on handwritten document collections

International Journal on Document Analysis and Recognition (IJDAR) - This work addresses the problem of Question Answering (QA) on handwritten document collections. Unlike typical QA and Visual...     

Tensile stress–strain and work hardening behaviour of P9 steel for wrapper application in sodium cooled fast reactors

Tensile flow behaviour of P9 steel with different silicon content has been examined in the framework of Hollomon, Ludwik, Swift, Ludwigson and Voce relationships for a wide temperature range (300–873 K) at a strain rate of 1.3 × 10^?3 s^?1. Ludwigson equation described true stress (σ)–true plastic strain (ε) data most accurately in the range 300–723 K. At high temperatures (773–873 K), Ludwigson equation reduces to Hollomon equation. The variations of instantaneous work hardening rate (θ = dσ/dε) and θσ with stress indicated two-stage work hardening behaviour. True stress–true plastic strain, flow parameters, θ vs. σ and θσ vs. σ with respect to temperature exhibited three distinct temperature regimes and displayed anomalous behaviour due to dynamic strain ageing at intermediate temperatures. Rapid decrease in flow stress and flow parameters, and rapid shift in θ–σ and θσ–σ towards lower stresses with increase in temperature indicated dominance of dynamic recovery at high temperatures.