Dielectric behavior of natural rubber composites in microwave fields

In this article, we report the preparation of conducting natural rubber (NR) with polyaniline (Pani). NR was made into a conductive material by the compounding of NR with Pani in powder form. NR latex was made into a conductive material by the in situ polymerization of aniline in the presence of NR latex. Different compositions of Pani–NR semi‐interpenetrating networks were prepared, and the dielectric properties of all of the samples were determined in microwave frequencies. The cavity perturbation technique was used for this study. A HP8510 vector network analyzer with a rectangular cavity resonator was used for this study. S bands 2–4 GHz in frequency were used. Thermal studies were also carried out with thermogravimetric analysis and differential scanning calorimetry. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2682–2686, 2007     

Rotating machinery prognostics: State of the art,challenges and opportunities

Machinery prognosis is the forecast of the remaining operational life, future condition, or probability of reliable operation of an equipment based on the acquired condition monitoring data. This approach to modern maintenance practice promises to reduce downtime, spares inventory, maintenance costs, and safety hazards. Given the significance of prognostics capabilities and the maturity of condition monitoring technology, there have been an increasing number of publications on rotating machinery prognostics in the past few years. These publications covered a wide spectrum of prognostics techniques. This review article first synthesises and places these individual pieces of information in context, while identifying their merits and weaknesses. It then discusses the identified challenges, and in doing so, alerts researchers to opportunities for conducting advanced research in the field. Current methods for predicting rotating machinery failures are summarised and classified as conventional reliability models, condition-based prognostics models and models integrating reliability and prognostics. Areas in need of development or improvement include the integration of condition monitoring and reliability, utilisation of incomplete trending data, consideration of effects from maintenance actions and variable operating conditions, derivation of the non-linear relationship between measured data and actual asset health, consideration of failure interactions, practicability of requirements and assumptions, as well as development of performance evaluation frameworks.     

Temperature dependence of the optical transitions in CdTe thin film – Investigation with photoresponse spectra

The CdTe thin films have been prepared by electrochemical method from a bath solution containing cadmium sulfate and tellurium dioxide. Schottky devices of the type Au/CdTe were prepared and the spectral response of the device has been investigated. The direct and indirect transitions in the 1.3–1.6 eV region were calculated from the normalized spectral response data. The temperature dependence of the band gap have been investigated and correlated with the theory. The band gap of CdTe at absolute zero temperature is estimated as 1.61 eV and that the rate of change of E_g with temperature is calculated as −0.4 meV/K. The 1.407 eV indirect transition involves a trap level near the conduction band edge. The indirect transition also exhibits temperature dependence.     

Volatile aroma compounds of raw and roasted palm kernel

The volatile aroma compounds of raw and roasted palm kernel, isolated by hydrodistillation, were analysed by g.l.c. and g.c.-m.s. A number of compounds have been identified for the first time in this commodity. It was found that δ-lactones and ethyl esters were predominant in the flavour profile. In roasted palm kernels, flavour analysis showed the presence of a number of pyrazines formed during heating. Most of the lactones and esters identified in raw palm kernel were present in the roasted samples also. The flavour concentrate included a number of fatty acids in both the raw and roasted samples, in small amounts.     

Dynamic mechanical analysis of novel composites from commingled polypropylene fiber and banana fiber

Polypropylene (PP)/banana fiber (BF) composites were fabricated from PP fiber and short BF by novel commingling method. The dynamic mechanical analysis (DMA) of the composites was performed with reference to BF loading and fiber surface treatments. By the incorporation of BF into the PP matrix, the storage modulus and loss modulus have been found to increase, whereas damping factor has been found to decrease. Glass transition temperature was found to increase with increase in BF loading. The viscoelastic properties of the composites were also found to depend on fiber surface treatments. The activation energy of the composites for the glass transition has been found to be increased by the increase in BF loading. Surface treatment of the BF further increased the activation energy of the composites, indicating a stronger interface for treated fiber composites. Scanning electron microscopy (SEM) photographs of the BF showed the physical changes induced by the surface treatments. Fourier transform infrared spectroscopy (FTIR) was used to ascertain the existence of the type of interfacial bonds. The use of theoretical equations to predict the storage modulus has also been discussed. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers     

Static mixers for laminar flow reactors with low aspect ratios

Conventional static mixers typically require high length to diameter ratios to be effective. This paper considers static mixers design to increase first appearance times in short, fat reactors. Three types are considered: conical baffles and annular baffles for tubular reactors and axial baffles for reactors with a rectangular cross-section. Relatively simple designs allow production increases (or reactor volume decreases) on the order of 20–50%.     

Statistical approach on 3D hydromagnetic flow of water-based nanofluid between two vertical porous plates moving in opposite directions

The nanofluid flow between two plates is a common topic of research. However, studies dealing with the flow between two vertical plates moving in different directions have not been largely accounted for. The main aim of this study is to analytically and statistically investigate the MHD flow of water-based nanofluid between two vertical porous plates moving in opposite directions using perturbation technique and multiple linear regression, respectively. The consequence of various parameters on concentration, temperature, and velocity are examined via graphs using MATLAB software. It is observed that the main flow velocity profile is greater when the magnetic field is applied on the upward moving plate as compared to the main flow velocity when the magnetic field is applied on the downward-moving plate. The physical quantities are scrutinized using statistical tools like probable error and multiple linear regression and an excellent agreement is noted. It is noted that the Nusselt number is highly positively correlated with the injection parameter and highly negatively correlated with nanoparticle volume fraction. Furthermore, the simultaneous effects of parameters on drag coefficients are studied with the aid of three-dimensional surface plots.     

Performance of Counterflow Microchannel Heat Exchangers Subjected to External Heat Transfer

This article analyzes the effect of external heat transfer on the thermal performance of counterflow microchannel heat exchangers. Equations for predicting the axial temperature and the effectiveness of both fluids as well as the heat transferred between the fluids, while operating under external heating or cooling conditions, are provided in this article. External heating may decrease and increase the effectiveness of the hot and cold fluids, respectively. External cooling may improve and degrade the effectiveness of the hot and cold fluids, respectively. For unbalanced flows, the thermal performance of the microchannel heat exchanger subjected to external heat transfer depends on the fluid with the lowest heat capacity. At a particular number of transfer units (NTU), the effectiveness of both the fluids increased with decrease in heat capacity ratio when the hot fluid had the lowest heat capacity. When the cold fluid had the lowest heat capacity, the effectiveness of both fluids increased with decrease in heat capacity ratio at low values of NTU but at high values of NTU the effectiveness increased with increase in heat capacity ratio. A term called the “performance factor” has been introduced in this article to assess the relative change in effectiveness due to external heat transfer.     

Tribocorrosion behaviour of TiCxOy thin films in bio-fluids

Decorative coatings require not only an attractive appearance for market applications, but also an ability to protect the surface underneath. Because of this, corrosion, wear and their combined effects (termed tribocorrosion) are particularly important for lifetime prediction. In this paper, the tribocorrosion behaviour of a range of single layered titanium oxycarbide, TiC_xO_y, coatings, produced by DC reactive magnetron sputtering, has been studied and reported as a function of electrode potential and applied load. The study was conducted in a reciprocating sliding tribo-system (Plint TE 67/E) in a bio-fluid (an artificial perspiration solution) at room temperature. During the wear tests, both the open-circuit potential and the corrosion current were monitored. The results showed that electrode potential and load have a significant influence on the total material loss. The variations in R_p (polarization resistance) and C_f (capacitance) before and after sliding, obtained by Electrochemical Impedance Spectroscopy (EIS) were evaluated in order to provide an understanding of the resistance of the film in such conditions. Tribocorrosion maps were generated, based on the results, indicating the change in mechanisms of the tribological and corrosion parameters for such coatings, as a function of load and applied potential.     

Physical insights regarding design and performance of independent-gate FinFETs

Important physical insights regarding the design and performance of independent-gate FinFETs, e.g., the MIGFET , are gained from measured data and predictions from our process/physics-based double-gate (DG) MOSFET model (UFDG) in Spice3. Inversion charge-centroid shifting, modulated by gate biases as well as by quantum-confinement and short-channel effects, underlies the sensitivity of the MIGFET (front-gate) threshold voltage to the back-gate bias. MIGFET design and operation-mode options are examined for optimizing circuit applications. Further, novel design of a single-device RF mixer and a double-balanced counterpart using MIGFETs is studied with UFDG/Spice3. Reasonably good MIGFET mixers, with regard to conversion gain and linearity with small-size/low-voltage/low-power requirements, can be achieved with optimal biases on the two gates and good design of the MIGFET structure.