Physical properties and dyeability of silk fibers modified with ethoxyethylmethacrylate polymer

The structural characteristics, physical properties, and dyeing behavior of Bombyx mori silk fibers containing ethoxyethylmethacrylate (ETMA) polymer are reported in relation to the add-on. The add-on value increased with the reaction time and attained a maximum after 60 min at 80°C. The surface of silk fibers with an add-on value of 40% showed the presence of several irregular granules, consisting of ETMA oligomers. The infrared spectrum of the silk fibers containing the ETMA polymer showed overlapped absorption bands due to the molecular conformation of untreated silk and ETMA polymer, giving evidence that the ETMA polymerization occurred inside the fiber matrix. The DSC results suggested that the thermal decomposition behavior of the silk fiber remained almost unchanged, except that the decomposition temperature shifted slightly to higher temperature. The tensile properties of the silk fiber remained unchanged regardless of the ETMA polymerization. The rate and extent of acid dye uptake was greatly increased by the polymerization of ETMA into the silk fibers as well as the transfer printing properties.     

Field and electroantennogram responses to sex pheromone optical isomers by monophagous jack pine sawflies (Hymenoptera: Diprionidae)

Several species of monophagous jack pine sawflies (Hymenoptera: Diprionidae) were tested in the field and by electroantennograms (EAG) for activity toward the optical isomers of a pine sawfly sex pheromone, the acetate and propionate esters of 3,7-dimethylpentadecan-2-ol.Neodiprion rugifrons andNeodiprion dubiosus were attracted to a mixture of the propionate esters of the 2S,3R,7R and 2S,3R,7S isomers, whereasNeodiprion swainei was attracted to the 2S,3S,7S propionate isomer. Samples containing the 2S,3R,7S propionate isomer elicited the strongest EAG responses in these three species andNeodiprion nigroscutum. The 2S,3S,7S propionate isomer was equally active (EAG) in the case ofN. swainei.     

Chain extenders for polyesters. I. Addition-type chain extenders reactive with carboxyl end groups of polyesters

Effective chain extenders for linear polyesters were investigated among some bis-heterocycles, which were capable of coupling carboxyl terminals of the polyesters through addition reaction. Consequently, 2,2′-bis(2-oxazoline), 2,2′-bis(5,6-dihydro-4H-1,3-oxazine) and N,N′-hexamethylenebis(carbamoyl-2- oxazoline) were found to be the most effective chain extenders. Starting from a poly(ethylene terephthalate) (PET) having intrinsic viscosity ([η]) of 0.66 and carboxyl content (CV) of 46 eq/10⁶ g, one could obtain polyesters with [η] of above 1.0 and CV of below 5 eq/10⁶ g in the presence of the chain extenders. Typical reaction condition for the coupling of PET was heating PET under atmospheric nitrogen above its melting temperature with 0.5 mol % of a chain extenders only for several minutes. Bis-2-thiazolines showed no effect under the condition investigated, while in case of bis-2-imidazolines definite degradation was observed. Bis-N-acylaziridines and bisiminocarbonates resulted in some gell formation, indicative of side reactions.     

The effect of support structure on CO2 hydrogenation over a rhodium catalyst supported on niobium oxide

The hydrogenation of CO₂ was investigated over a rhodium catalyst supported on niobium oxide at atmospheric pressure. Niobium oxide was prepared by the hydrolysis of niobium chloride and its crystallitic structure was controlled by calcination temperature. It was found that the activity was lower but the selectivity of C₂₊ hydrocarbons was higher for the and forms than for the and forms of the niobium oxide.     

Continuous extraction and separation of Am(III) and Cm(III) using a highly practical diamide amine extractant

A highly practical diamide-type extractant, which is an alkyl diamide amine with 2-ethylhexyl alkyl chains (ADAAM(EH)), was investigated for the mutual separation of Am(III) and Cm(III). ADAAM(EH) is a multidentate ligand with one soft N-donor atom and two hard O-donor atoms as part of its central frame. This tridentate arrangement of donor atoms provides selective binding to Am(III) compared to that with Cm(III) in highly acidic media (1.5 M HNO₃), resulting in separation factors of up to 5.5. A continuous liquid–liquid extraction and stripping test was conducted using a multistage countercurrent mixer-settler extractor with ADAAM(EH) in n-dodecane. In this test, the separation of Am(III) and Cm(III) was achieved with very high yield.     

Characterizations of the Microstructure of 9Cr-1Mo Steel Weld Joint After Long-Term Service in a Supercritical Fossil Power Plant

In the present work, the microstructure, micro-hardness, and chemical composition of 9Cr-1Mo weld joint after long-term service in a supercritical power plant were analyzed by using various analytical techniques. The hardness profile showed a maximum at the fusion boundary and a minimum in the region of the fine grain heat-affected zone (FGHAZ). Many cavities along the grain boundaries and in grains were also observed in the FGHAZ. Ferrite zones with lower hardness and larger grain sizes were observed in the weld metal. The formation mechanisms of the cavities and ferrite zones were discussed based on the results.

     

Drastic enhancement of effective thermal conductivity of a metal hydride packed bed by direct synthesis of single-walled carbon nanotubes

Low heat conductivity restricts the rate of hydrogen absorption into a metal hydride, and this leads to a mismatch of the required absorption rate. The use of fin systems is standard in such cases, and the use of several different materials has been attempted. This includes high thermal conductivity carbon brushes and carbon nanotube. Unfortunately, such efforts have not been effective because the boundary thermal resistance has not been addressed. In this study, we focused on the direct synthesis of a single-walled carbon nanotube (SWCNT), which has high thermal conductivity, on particles in a packed bed, for reducing boundary thermal resistance and estimated effective thermal conductivity. Referring to Raman spectra, we succeeded in growing SWCNT on a metal hydride and effective thermal conductivity was estimated as a function of the filling ratios of the metal hydride and the SWCNT. Consequently, the effective thermal conductivity can satisfy the required value.     

Simulation of cutting process in peripheral milling by predictive cutting force model based on minimum cutting energy

The cutting force and the chip flow direction in peripheral milling are predicted by a predictive force model based on the minimum cutting energy. The chip flow model in milling is made by piling up the orthogonal cuttings in the planes containing the cutting velocities and the chip flow velocities. The cutting edges are divided into discrete segments and the shear plane cutting models are made on the segments in the chip flow model. In the peripheral milling, the shear plane in the cutting model cannot be completely made when the cutting point is near the workpiece surface. When the shear plane is restricted by the workpiece surface, the cutting energy is estimated taking into account the restricted length of the shear plane. The chip flow angle is determined so as to minimize the cutting energy. Then, the cutting force is predicted in the determined chip flow model corresponding to the workpiece shape. The cutting processes in the traverse and the contour millings are simulated as practical operations and the predicted cutting forces verified in comparison with the measured ones. Because the presented model determines the chip flow angle based on the cutting energy, the change in the chip flow angle can be predicted with the cutting model.