A New Design Concept for High-Performance Fading Channel Simulators Using Set Partitioning

In this paper, we introduce a new technique for the design of high-performance Rayleigh fading channel simulators. The proposed design method uses set partitioning – a technique, which plays a key role in the design of trellis-coded modulation schemes. We show how set partitioning can be used to design multiple uncorrelated fading waveforms enabling the simulation of Rayleigh fading channels. For the important case of isotropic scattering, we show that the sample average of the generated waveforms results in a deterministic process, the autocorrelation function (ACF) of which tends to the zeroth-order Bessel function of the first kind as the number of sample functions increases. The proposed procedure is completely deterministic. The comparison with a stochastic procedure using Monte Carlo techniques will be made. A study of the performance shows clearly that the new technique using set partitioning outperforms by far existing Monte Carlo methods.     

On the Static Resolution of Digitally Corrected Analog-to-Digital and Digital-to-Analog Converters With Low-Precision Components

This semi-tutorial paper considers the effect of component mismatch on the static accuracy of analog-to-digital converters (ADCs) and digital-to-analog converters (DACs) with digital correction. First, it is noted that the effective static resolution of flash ADCs is not much reduced by component mismatch: with proper digital correction, the loss due to mismatch is only about 1.3 bit, virtually independently of the mismatch level unless the mismatch is very small. Second, it is noted that current steering DACs may actually benefit from component mismatch. Moreover, with proper digital correction, current steering DACs can achieve an effective static resolution of m bits with as few as m+2 near-unit low-precision current sources     

Investigation of physical and chemical property changes of ultra low-κ SiOCH in aspect of cleaning and chemical repair processes

The physical and chemical property changes of chemical vapor deposited ultra low-κ (ULK) SiOCH dielectric films due to different post ash treatments were studied by Auger electron spectroscopy, ellipsometric porosimetry and surface free energy evaluation. Structural changes in the ULK layer with respect to the carbon content were analyzed. Using a downstream and a reactive ion etch process for photo resist removal a reduction of carbon was observed. For different plasma gas chemistries the pore size reduction depends first on the process condition (downstream or reactive ion etch) and then on the gas. Differences in the pore size then also influence the amount of carbon depletion besides the influence of the gases used for photo resist processes. The damage at the surfaces was characterized by contact angle measurements providing both the polar and dispersive part of the surface free energy. The wettability of different solvents and repair chemicals was classified calculating their surface free energies and comparing those energies with the surface free energies of modified ULK surface. It is shown that especially reducing gases provide a surface free energy with a higher dispersive part compared to oxidative plasma treatments. Furthermore it was found that the wettability of repair chemicals and solvents strongly changes for reductive based strip processes with plasma exposure time, since a high variation of the surface free energy occur.     

Core‐Brominated Tetraazaperopyrenes as n‐Channel Semiconductors for Organic Complementary Circuits on Flexible Substrates

Organic thin‐film transistors (TFTs) are prepared by vacuum deposition and solution shearing of 2,9‐bis(perfluoroalkyl)‐substituted tetraazaperopyrenes (TAPPs) with bromine substituents at the aromatic core. The TAPP derivatives are synthesized by reacting known unsubstituted TAPPs with bromine in fuming sulphuric acid, and their electrochemical properties are studied in detail by cyclic voltammetry and modelled with density functional theory (DFT) methods. Lowest unoccupied molecular orbital (LUMO) energies and electron affinities indicate that the core‐brominated TAPPs should exhibit n‐channel semiconducting properties. Current‐voltage characteristics of the TFTs established electron mobilities of up to μ_n = 0.032 cm² V^?1 s^?1 for a derivative which was subsequently processed in the fabrication of a complementary ring oscillator on a flexible plastic substrate (PEN).     

Development of compatible wet-clean stripper for integration of CoWP metal cap in Cu/low-k interconnects

Implementation of CoWP metal caps into Cu/low-k integration schemes requires a wet stripper that not only gives efficient cleaning but also has good compatibility to CoWP and low-k dielectrics. This paper describes a novel non-fluoride CoWP compatible stripper, developed based on a systematic study of the effect of stripper components, i.e. solvent, corrosion inhibitor, and stripper pH. Electrochemical methods were used to characterize galvanic corrosion of the CoWP/Cu couple and to estimate CoWP etch rate. Our studies showed that a traditional fluoride stripper caused severe damage to CoWP capping layer. The new stripper achieved a good balance between cleaning efficiency and compatibility to CoWP and low-k dielectrics, and demonstrated significant advantages in electrical properties over the traditional fluoride stripper.     

Ultranarrow Bandwidth Organic Photodiodes by Exchange Narrowing in Merocyanine H‐ and J‐Aggregate Excitonic Systems

Ultranarrowband organic photodiodes (OPDs) are demonstrated for thin film solid state materials composed of tightly packed dipolar merocyanine dyes. For these dyes the packing arrangement can be controlled by the bulkiness of the donor substituent, leading to either strong H‐ or strong J‐type exciton coupling in the interesting blue (H‐aggregate) and NIR (J‐aggregate) spectral ranges. Both bands are shown to arise from one single exciton band according to fluorescence measurements and are not just a mere consequence of different polymorphs within the same thin film. By fabrication of organic thin‐film transistors, these dyes are demonstrated to exhibit hole transport behavior in spin‐coated thin films. Moreover, when used as organic photodiodes in planar heterojunctions with C₆₀ fullerene, they show wavelength‐selective photocurrents in the solid state with maximum external quantum efficiencies of up to 11% and ultranarrow bandwidths down to 30 nm. Thereby, narrowing the linewidths of optoelectronic functional materials by exciton coupling provides a powerful approach to produce ultranarrowband organic photodiodes.     

New super-orthogonal space-time trellis codes using differential M-PSK for noncoherent mobile communication systems with two transmit antennas

In this paper, we develop super-orthogonal space-time trellis codes (SOSTTCs) using differential binary phase-shift keying, quadriphase-shift keying and eight-phase shift keying for noncoherent communication systems with two transmit antennas without channel state information at the receiver. Based on a differential encoding scheme proposed by Tarokh and Jafarkhani, we propose a new decoding algorithm with reduced decoding complexity. To evaluate the performance of the SOSTTCs by way of computer simulations, a geometric two-ring channel model is employed throughout. The simulation results show that the new decoding algorithm has the same decoding performance compared with the traditional decoding strategy, while it reduces significantly the overall computing complexity. As expected the system performance depends greatly on the antenna spacing and on the angular spread of the incoming waves. For fair comparison, we also design SOSTTCs for coherent detection of the same complexity as those demonstrated for the noncoherent case. As in the case of classical single antenna transmission systems, the coherent scheme outperforms the differential one by approximately 3 dB for SOSTTCs as well.     

Solvent‐Induced Morphology in Polymer‐Based Systems for Organic Photovoltaics

Studies on the influence of four different solvents on the morphology and photovoltaic performance of bulk‐heterojunction films made of poly(3‐hexylthiophene) (P3HT) and [6,6]‐phenyl‐C₆₁ butyric acid methyl ester (PCBM) via spin‐coating for photovoltaic applications are reported. Solvent‐dependent PCBM cluster formation and P3HT crystallization during thermal annealing are investigated with optical microscopy and grazing‐incidence wide‐angle X‐ray scattering (GIWAXS) and are found to be insufficient to explain the differences in device performance. A combination of atomic force microscopy (AFM), X‐ray reflectivity (XRR), and grazing‐incidence small‐angle X‐ray scattering (GISAXS) investigations results in detailed knowledge of the inner film morphology of P3HT:PCBM films. Vertical and lateral phase separation occurs during spin‐coating and annealing, depending on the solvent used. The findings are summarized in schematics and compared with the IV characteristics. The main influence on the photovoltaic performance arises from the vertical material composition and the existence of lateral phase separation fitting to the exciton diffusion length. Absorption and photoluminescence measurements complement the structural analysis.     

EXAFS as Powerful Analytical Tool for the Investigation of Organic–Inorganic Hybrid Materials

The potential and application of X‐ray absorption spectroscopy (XAS) for structural investigations of organic–inorganic hybrid materials, with a special emphasis on systems consisting of inorganic building blocks (clusters) embedded into polymer backbones, is extensively reviewed. In the first part of the paper, the main features of organic–inorganic hybrid materials, their classification, the synthetic approaches for their preparation, and their applications are concisely presented, whereas the particular issues related to their characterization are discussed in more detail. In the second section of the paper, the principles and the theoretical background of the XAS method, including experimental design, data reduction, evaluation, analysis, and interpretation are described and discussed. Examples of potentialities of the method for the short‐range structural investigation of inorganic nanostructures in hybrids are provided, and the state‐of‐the‐art in the field of hybrid materials is reviewed. In the third part, six different case studies belonging to our past and present experience in this field are presented and discussed, with a particular focus on their XAS investigation.     

40 GHz Vertical Transition with a Dual‐Mode Cavity for a Low‐Temperature Co‐fired Ceramic Transceiver Module

A new vertical transition between a substrate integrated waveguide in a low‐temperature co‐fired ceramic substrate and an air‐filled standard waveguide is proposed in this paper. A rectangular cavity resonator with closely spaced metallic vias is designed to connect the substrate integrated waveguide to the standard air‐filled waveguide. Physical characteristics of an air‐filled WR‐22 to WR‐22 transition are compared with those of the proposed transition. Simulation and experiment demonstrate that the proposed transition shows a ?1.3 dB insertion loss and 6.2 GHz bandwidth with a 10 dB return loss for the back‐to‐back module. A 40 GHz low‐temperature co‐fired ceramic module with the proposed vertical transition is also implemented. The implemented module is very compact, measuring 57 mm × 28 mm × 3.3 mm.