Development of a universal modeling tool for rechargeable lithium batteries

An interesting universal modeling tool for rechargeable lithium batteries is presented in this paper. The generic model is based on an equivalent circuit technique commonly used in electrochemical impedance characterization. Therefore, the parameters used in the model can be easily parameterized from the electrochemical impedance derivations, which provide a convenient integration with experimental cell characterizations. Such integration offers the universality in this modeling approach.     

The effect of external flow on the feeding currents of sessile microorganisms

Microscopic sessile suspension feeders live attached to surfaces and, by consuming bacteria-sized prey and by being consumed, they form an important part of aquatic ecosystems. Their environmental impact is mediated by their feeding rate, which depends on a self-generated feeding current. The feeding rate has been hypothesized to be limited by recirculating eddies that cause the organisms to feed from water that is depleted of food particles. However, those results considered organisms in still water, while ambient flow is often present in their natural habitats. We show, using a point-force model, that even very slow ambient flow, with speed several orders of magnitude less than that of the self-generated feeding current, is sufficient to disrupt the eddies around perpendicular suspension feeders, providing a constant supply of food-rich water. However, the feeding rate decreases in external flow at a range of non-perpendicular orientations due to the formation of recirculation structures not seen in still water. We quantify the feeding flow and observe such recirculation experimentally for the suspension feeder Vorticella convallaria in external flows typical of streams and rivers.     

Photo-oxidation in an O2 atmosphere: A powerful tool to elucidate the mechanism of UV-visible light oxidation of polymers - Application to the photodegradation of MDMO-PPV

This article describes a new approach to improve the analysis of the chemical modifications that result from the degradation of polymers under UV-visible light exposure in the presence of oxygen. The tool which is used consists of an irradiation chamber whose atmosphere is composed of ¹⁸O₂. The ¹⁸O₂ pressure inside the chamber and the hygrometry can be adjusted. In this study, particular attention was paid to the photo-oxidation of poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV). Using infrared spectroscopy, irradiation under the oxygen 18 atmosphere allowed discrimination between compounds formed via fixation of oxygen from the atmosphere and those formed by reorganisation of the matrix. In addition, irradiation of MDMO-PPV in an ¹⁸O₂ wet atmosphere allowed for detection of the presence of phenyl formate and aromatic ketone functions. This permitted validating the mechanism of photo-oxidation previously proposed. Additionally, with regard to blends made with MDMO-PPV and methano-fullerene[6,6]-phenyl C₆₁-butyric acid methyl ester ([60] PCBM), it was demonstrated that this technique facilitates the identification of the photo-oxidation products formed.     

Span-Restorable Mesh Networks with Multiple Quality of Protection (QoP) Service Classes

In the modern business environment there is considerable interest in being able to support a range of different transport service classes in an optical network, and charge accordingly. In this work we consider the capacity design problem for a mesh-restorable optical network supporting any mixture of four basic quality of protection (QoP) classes. The service definitions are (gold): assured restorability, (silver): best efforts, (bronze): non-protected and (economy): preemptible service. We give design models for optimal capacity design of span-restorable (or corresponding link-protected) mesh networks having any particular mixture of these service classes. We also apply and test the design models under several multi-QoP test case scenarios to gain insights about various strategies and options possible in a multi-QoP design environment. An interesting finding is that in some test cases, 15 to 30% of all demand can be in the gold class enjoying 100% restorability solely through preemption of economy class service capacity. This suggests the potential to design and operate mesh-based networks that have no spare capacity at all in the conventional sense: all capacity is bearing service of some paying type. The resulting frequency of preemption in the economy class services is also studied. Results also show typically high levels of best-efforts restorability in the silver class occurring in networks that are strictly designed only for the restorability of the gold class services. High restorability of best effort services, however, requires the preemption of economy services. These methods and findings can be used by network and business planners to evaluate a number of different service structuring, pricing, and capacity-design strategies that may offer advantages to them and new options for their customers.     

Scanning near-field optical microscopy as a tool for the characterization of multimode interference devices

We report the scanning near-field optical microscopy (SNOM) characterization of a 4 x 4 multimode interference (MMI) device working at a wavelength of 1.55 microm and designed for astronomical signal recombination. A comprehensive analysis of the mapped propagating field is presented. We compare SNOM measurements with beam-propagation-method simulations and thus are able to determine the MMI structure's refractive-index contrast and show that the measured value is higher than the expected value. Further investigation allows us to demonstrate that good care must be taken with the refractive-index profile used in simulation when one deals with low-index contrast structures. We show evidence that a step-index contrast is not suitable for adequate simulation of our structure and present a model that permits good agreement between measured and simulated propagating fields.     

Factors associated with carcass contamination by Campylobacter at slaughterhouse in cecal-carrier broilers

A study was conducted in 2009 to identify risk factors of Campylobacter spp. transmission from the digestive tract to the carcasses of standard broilers (slaughter age: 37 day, carcass weight: 1.3 kg on average). Counts of Campylobacter were performed on pools of 10 ceca and 10 neck-skins from 108 Campylobacter ceca-positive batches in three slaughterhouses. Technical and health data also was collected on the broilers: age, size, carcass weight (mean and standard deviation), condemnation rate, mortality rate and nature of treatment during the rearing period.Cecal counts varied from 4.8 to 10.2 log₁₀ cfu/g. In seventeen batches (15.7%), the skin count was below the detection limit. In the 91 batches with positive neck-skin test results, the counts varied from 2.0 to 5.2 log₁₀ cfu/g. Standard deviation of carcass weight, condemnation rate, slaughter rate and cecal count were significantly lower and growth rate higher in the 17 batches where neck-skin results were not detected positive. Multivariate analysis showed that batches with higher standard deviation of carcass weight were 5 to 9 fold more at risk of having detectable carcass contamination. Among the 91 positive neck-skin batches, only slaughter rate and cecal counts were found to have a significant but limited effect on the level of neck-skin contamination. As far as body weight homogeneity may be affected by disease, better health control can contribute to a reduction of the contamination of the broiler carcasses in Campylobacter carrier batches.     

From contact angle titration to chemical force microscopy: a new route to assess the pH-dependent character of the stratum corneum

Despite of its complex multicomponent organization and its compact architecture, the Stratum corneum (SC) is not completely impermeable to substances directly applied on the skin surface. A huge number of works have been dedicated to the understanding of the mechanisms involved in substance permeation by exploring deeper layers than the SC itself. Surprisingly, there is a poor interest in studies relating to interactions which may occur in the near-surface region (i.e. approximately 1 nm depth) of the SC. In this work, equilibrium proton-transfer reactions have been used as probes to define in a fundamental point of view the nature of the SC interactions with its environment. Such titration curves are investigated on 'in vitro' SC (isolated SC from abdominal skin tissue) and on 'in vivo' volar forearm (a sebum poor area). The results are discussed in term of work of adhesion and surface pKa values. Because SC can 'reconstruct' under heating, influence of the temperature on titration curves is investigated and the role of the different components is discussed. Different sigmoidal transitions were observed. Two common pKa values (pKa(1) = 4 and pKa(2) = 11.5) were clearly identified in both cases and associated to an acid-base character. By playing with the temperature of 'in vitro' SC, the 'accessibility' of polar functions was increased, thus refining the results by revealing an amphoteric character with an acid-to-base transition at pH 3.5 and two acid transitions at pH = 6.5 and pH = 11.5. Adhesion forces between an Atomic Force Microscopy (AFM) tip and a single isolated corneocyte through buffered liquid media were also investigated to better understand the role of the individual corneocytes.     

Improving the performances of earth air heat exchangers through Constructal design

Earth to air heat exchanger (EAHE) is a well‐known technique used to preheat or precool outdoor air before blowing it into a building. However, its geometry is often very simple as it consists in one or multiple straight pipes, while more complex arrangements can be found in heat exchangers design. In this paper, we explore the advantage of designing an EAHE as a network through the Constructal law point of view. A methodology is first proposed to design a single pipe EAHE when the need is defined in terms of cooling power, overall efficiency and enthalpy difference between the inlet air and the ground. Next, the single pipe EAHE is used as a reference for designing a tree‐shaped network under the constraint of identical fluid volume and cooling power. The geometrical features are allowed to change for the different branches of the network. The network coefficient of performance is found to increase significantly with the bifurcation level, illustrating the superior performances of the network. This approach was found to be robust as the improvements were not depending on the cooling demand or the environmental conditions. However, further work is needed to move from this theoretical result to practical considerations.