Willingness to use safety belt and levels of injury in car accidents

In this article, we develop a bivariate ordered Probit model to analyze the decision to fasten the safety belt in a car and the resulting severity of accidents if it happens. The approach takes into account the fact that the decision to fasten the safety belt has a direct causal effect on the category of injury if an accident happens. Our application to a sample drawn from the database of French accident reports in 2003 for three populations of car users (drivers, front passengers, rear passengers) shows that fastening the safety belt is significantly related to a decrease in severe injuries but it shows also that these car users compensate partly for this safety benefit. Furthermore, it is observed that demographic characteristics of car users, as well as transport facilities, play important roles in decisions to fasten safety belts and in the eventual resulting accident injuries.     

Melt Homogenization and Self-Organization in Chalcogenides-Part II

The compositional variation of the non-reversing enthalpy at T_g, ΔH_nr(x), in Ge_xSe_100−x glasses decreases abruptly by an order of magnitude as x increases to x_c(1) = 19.5(5)%, the rigidity transition, and then remains minuscule till x increases to x_c(2) = 26.0(5)%, when the term abruptly increases by an order of magnitude as glasses become stressed-rigid. The rigid but unstressed networks formed in between these two transitions represent the Intermediate Phase (IP). The square-well like variation of ΔH_nr(x), also known as the reversibility window develops sloping walls, then a triangular shape and eventually disappears as glasses of increasing heterogeneity are studied. The ΔH_nr term ages over weeks outside the IP but not inside the IP. Raman line shapes of as-quenched melts are quite similar to those of T_g-cycled glasses for compositions in the IP, but not outside the IP– an optical analog of the thermal reversibility window. Variations of Molar volumes, display a global minimum in the IP and a pronounced increase outside that phase. Physical behavior of dry and homogeneous chalcogenide glasses that leads to sharp elastic and chemical phase transitions remains to be understood theoretically. The physics of network may be even more interesting than hitherto recognized.     

From contact angle titration to chemical force microscopy: a new route to assess the pH-dependent character of the stratum corneum

Despite of its complex multicomponent organization and its compact architecture, the Stratum corneum (SC) is not completely impermeable to substances directly applied on the skin surface. A huge number of works have been dedicated to the understanding of the mechanisms involved in substance permeation by exploring deeper layers than the SC itself. Surprisingly, there is a poor interest in studies relating to interactions which may occur in the near-surface region (i.e. approximately 1 nm depth) of the SC. In this work, equilibrium proton-transfer reactions have been used as probes to define in a fundamental point of view the nature of the SC interactions with its environment. Such titration curves are investigated on 'in vitro' SC (isolated SC from abdominal skin tissue) and on 'in vivo' volar forearm (a sebum poor area). The results are discussed in term of work of adhesion and surface pKa values. Because SC can 'reconstruct' under heating, influence of the temperature on titration curves is investigated and the role of the different components is discussed. Different sigmoidal transitions were observed. Two common pKa values (pKa(1) = 4 and pKa(2) = 11.5) were clearly identified in both cases and associated to an acid-base character. By playing with the temperature of 'in vitro' SC, the 'accessibility' of polar functions was increased, thus refining the results by revealing an amphoteric character with an acid-to-base transition at pH 3.5 and two acid transitions at pH = 6.5 and pH = 11.5. Adhesion forces between an Atomic Force Microscopy (AFM) tip and a single isolated corneocyte through buffered liquid media were also investigated to better understand the role of the individual corneocytes.     

A New View of Microcrystalline Silicon: The Role of Plasma Processing in Achieving a Dense and Stable Absorber Material for Photovoltaic Applications

To further lower production costs and increase conversion efficiency of thin‐film silicon solar modules, challenges are the deposition of high‐quality microcrystalline silicon (μc‐Si:H) at an increased rate and on textured substrates that guarantee efficient light trapping. A qualitative model that explains how plasma processes act on the properties of μc‐Si:H and on the related solar cell performance is presented, evidencing the growth of two different material phases. The first phase, which gives signature for bulk defect density, can be obtained at high quality over a wide range of plasma process parameters and dominates cell performance on flat substrates. The second phase, which consists of nanoporous 2D regions, typically appears when the material is grown on substrates with inappropriate roughness, and alters or even dominates the electrical performance of the device. The formation of this second material phase is shown to be highly sensitive to deposition conditions and substrate geometry, especially at high deposition rates. This porous material phase is more prone to the incorporation of contaminants present in the plasma during film deposition and is reported to lead to solar cells with instabilities with respect to humidity exposure and post‐deposition oxidation. It is demonstrated how defective zones influence can be mitigated by the choice of suitable plasma processes and silicon sub‐oxide doped layers, for reaching high efficiency stable thin film silicon solar cells.     

Double helical laser beams based on interfering first-order Bessel beams

We demonstrate the generation of a nondiffracting double helical beam using axicons and ±1 vortex phase plates in a common-path interferometric system. Using linear diffraction theory, a simple analytical expression describing beam propagation is shown to agree with both experiments and Fresnel-diffraction-based simulations. Experiments are performed using continuous laser light in addition to ultrafast pulses, demonstrating that the common-path arrangement and the diffraction theory work equally well for both cases.     

High‐efficiency microcrystalline silicon single‐junction solar cells

This short communication highlights our latest results towards high‐efficiency microcrystalline silicon single‐junction solar cells. By combining adequate cell design with high‐quality material, a new world record efficiency was achieved for single‐junction microcrystalline silicon solar cell, with a conversion efficiency of 10.69%, independently confirmed at ISE CalLab PV Cells. Such significant conversion efficiency could be achieved with only 1.8 µm of Si. Copyright © 2013 John Wiley & Sons, Ltd.     

Does microstructure matter for statistical nanoindentation techniques?

In their paper, Trtik et al. (2009) identify spurious peaks in the application of statistical nanoindentation technique as a critical obstacle for mechanical phase identification. In this discussion, we show that Trtik et al.’s finding is a consequence of an unrealistic virtual 3-D checkerboard microstructure considered by the authors. These peaks are not a general feature of indentation on multiphase materials, nor can the presence of such peaks be attributed to an intrinsic shortcoming of the grid-indentation technique. We also show that the authors’ assertion of the absence of homogeneous material regions extending beyond 3 μm in cementitious materials is groundless.     

Dark matter searches with H.E.S.S.

WIMP annihilations are required to reproduce the correct dark matter abundance in the Universe. This process can occur in dense regions of our Galaxy such as the Galactic center, dwarf galaxies and other types of sub-haloes. High-energy γ-rays are produced in dark matter particle collisions and can be detected by Cherenkov telescopes such as H.E.S.S. We report here the search for γ-ray signals from the Galactic center and the nearby Sagittarius and Canis Major satellites. In the absence of a convincing signal, modelling the dark matter density within these objects allows to put constraints on the WIMP parameters such as its mass and annihilation cross-section. Beyond these targeted searches, the wide-field survey of the inner Galaxy with H.E.S.S. is used to constrain sub-halo formation models involving intermediate-mass black holes.     

Molecular absorption spectrophotometric method for the determination of phosphorus in biodiesel

A molecular absorption method is proposed for the determination of phosphorus in biodiesel. The samples are mineralized using an ashing procedure at 550 °C followed by dissolution of the residue. The analytical procedure is based on the formation of a blue molybdenum complex. 1-amino-2-naphthol-4-sulfonic acid is used as reducing agent. The method was applied to biodiesel samples prepared from soy, canola and sunflower oils and from bovine fat. The limit of detection is 0.57 mg P kg⁻¹ and the limit of quantification is 1.7 mg P kg⁻¹. The observed mean relative standard deviation is about 5%. The simplicity of the procedure added to its precision, accuracy and low cost suggest that it is an excellent option for the determination of phosphorus in biodiesel.     

Numerical modeling of nonisothermal polymer crystallization kinetics: Flow and thermal effects

A numerical model able to simulate polymer crystallization under nonisothermal flows is developed. It is based on the assumption that the trace of the extra‐stress tensor, calculated according to a viscoelastic multimode Upper Convected Maxwell (UCM) model, is the driving force of the flow‐induced extra nucleation. Two distinct sets of Schneider equations are used to describe the growth of thermally and flow induced nuclei. The model is then coupled with the momentum equations and the energy equation. As an application, a shear flow configuration between two plates (Couette flow) is simulated. The relative influence of the mechanical and thermal phenomena on the crystallization development as well as the final morphology distribution is then analyzed as a function of the shearing intensity and the cooling kinetics, in terms of nucleation density and crystallite mean sizes. POLYM. ENG. SCI., 50:2044–2059, 2010. © 2010 Society of Plastics Engineers