Evaluating Off-Peak Traffic Signal Control Strategies

This article discusses the evaluation of flashing yellow as an off-peak traffic signal control strategy by establishing an interface between a real-time traffic simulation software HUTSIM (Helsinki University of Technology Simulation Model) and a standard NEMA (National Electrical Manufacturers Association) traffic signal controller. The analysis was performed as part of research dealing with evaluation of different off-peak traffic signal operation strategies and their relative impacts on delay, fuel consumption, vehicle emissions, and driver safety. Because of its widespread use, the main emphasis was on the flashing yellow signal control. Delay field study was performed to obtain and analyze real-world data and compare the efficiency of flashing yellow and fixed time control strategies. To widen the research effort and eliminate inaccuracies due to certain assumptions made during the field study, computer simulation was chosen as an effective tool for comparison of different control strategies. Four different strategies were evaluated: fixed time, fully and semiactuated, and flashing yellow. Flashing yellow was found to be the most efficient of the signal strategies. The impact of this type of off-peak signal control on driver safety also was studied, and a summary of results is presented.     

Modeling under-resourced languages for speech recognition

One particular problem in large vocabulary continuous speech recognition for low-resourced languages is finding relevant training data for the statistical language models. Large amount of data is required, because models should estimate the probability for all possible word sequences. For Finnish, Estonian and the other fenno-ugric languages a special problem with the data is the huge amount of different word forms that are common in normal speech. The same problem exists also in other language technology applications such as machine translation, information retrieval, and in some extent also in other morphologically rich languages. In this paper we present methods and evaluations in four recent language modeling topics: selecting conversational data from the Internet, adapting models for foreign words, multi-domain and adapted neural network language modeling, and decoding with subword units. Our evaluations show that the same methods work in more than one language and that they scale down to smaller data resources.     

Lippmann-Schwinger solvers for the computational homogenization of materials with pores

We show that under suitable hypotheses on the nonporous material law and a geometric regularity condition on the pore space, Moulinec-Suquet's basic solution scheme converges linearly. We also discuss for which derived solvers a (super)linear convergence behavior may be obtained, and for which such results do not hold, in general. The key technical argument relies on a specific subspace on which the homogenization problem is nondegenerate, and which is preserved by iterations of the basic scheme. Our line of argument is based in the nondiscretized setting, and we draw conclusions on the convergence behavior for discretized solution schemes in FFT-based computational homogenization. Also, we see how the geometry of the pores' interface enters the convergence estimates. We provide computational experiments underlining our claims.     

An exact error floor for downlink MC-CDMA in correlated Rayleighfading channels

Downlink multicarrier code-division multiple access (MC-CDMA) with maximal ratio combining (MRC) in correlated Rayleigh fading channels is considered. An exact error floor in a closed-form expression is provided based on the characteristic function (CF) and residue calculation method. Numerical results show that orthogonal spreading sequences (Walsh and orthogonal Gold sequences) perform better than nonorthogonal sequences (Gold sequences) and Walsh codes have the best performance. In addition, downlink MC-CDMA is found to benefit from the correlation between subcarriers     

Early development evaluation of AZD2738, a substrate for the NK receptors

The purpose of this study was to investigate whether AZD2738, a dual neurokinin NK1/2 receptor antagonist, is a suitable candidate for further development with an oral immediate release solid dosage form as a possible final product. The neutral form of AZD2738 has only been isolated as amorphous material. In order to search for a solid material with improved physical and chemical stability and more suitable solid-state properties, a salt screen was performed. Mostly crystalline material of fumarate, maleate and chloride salt of AZD2738 were obtained. X-ray powder diffractometry, thermogravimetric analysis, differential scanning calorimetry and dynamic vapor sorption were used to investigate the physicochemical characteristics of the salts. Based on the physicochemical properties, the chloride salt is preferred for continued product development. The chloride salt of AZD2738 is an anhydrate, the crystallization is reproducible, the hygroscopicity is acceptable and just one polymorph was obtained. Notably is that the two obtained polymorphs of the fumarate salt of AZD2738 are monotropically related, whereas the two identified polymorphs for the maleate salt of the compound are enantiotropic. The dissolution behavior and the stability (in aqueous solutions, formulations and solid state) of the salts were also studied and found to be satisfactory, at least at pH >3. Liquid formulations should preferable be stored frozen at pH >3.     

Water Condensation Promotes Fungal Growth In Ventilation Ducts

In a subarctic climate the diurnal variation in temperature may cause water condensation in ducts placed in the unheated spaces of a building. In this study, germination time and sporulation of a fungus, Penicillium verrucosum , were studied on dusty, galvanized steel sheet under different moisture conditions at room temperature. The effect of condensed water in a supply air duct on spore amplification was studied in an experimental ventilation set-up. In the field, air temperatures and the dew point temperature of air in the duct were monitored continuously for a week. P. verrucosum germinated on steel surfaces during five-hour incubation of the surface under humid conditions; when the surface had been moist for half an hour, germ tubes appeared within 17 hours. During 24-hour incubation under moist conditions, P. verrucosum produced hypae and spores. In the experimental set-up the airborne spore counts increased when the air passed through a water-condensingsection of the duct. Penicillium was the most abundant fungus sporulated on the moist duct surface. In the field, during humid weather, the surface temperature on the air stream surface decreased to the dew point temperature of the air in the duct. Thus water condensation in air ducts may promote fungal growth.     

Polycyclic aromatic hydrocarbons (PAHs) in soot produced by combustion of polystyrene,polypropylene, and wood

The smoke and soot produced by the combustion of plastics or wood in a domestic stove or fireplace contain many poisonous compounds, including the polycyclic aromatic hydrocarbons (PAHs), many of which are carcinogenic. PAHs were selected as the subject of our study to gain a better sense of the hazards of burning plastics. Small samples of polystyrene, polypropylene, and wood underwent combustion in a tubular oven at 700°C; in addition, polystyrene and wood were combusted at room temperature. After their extraction and purification, the PAHs were analyzed by gas chromatography and mass spectrometry. Conditions in the hot oven promoted soot production, whereas combustion at room temperature led to somewhat more complete combustion. The PAH profiles of the examined materials resembled each other to some extent, though the original chemical structure of the polymeric materials varied a great deal. However, clear differences between the materials could be detected from the soot extracts, the soot of polystyrene being especially rich in compounds containing remnants of the polymer structure. Carcinogenic activity caused by the PAHs can be assumed to be of the same order of magnitude as soot from the combustion of wood.     

A full-wave Helmholtz model for continuous-wave ultrasound transmission

A full-wave Helmholtz model of continuous-wave (CW) ultrasound fields may offer several attractive features over widely used partial-wave approximations. For example, many full-wave techniques can be easily adjusted for complex geometries, and multiple reflections of sound are automatically taken into account in the model. To date, however, the full-wave modeling of CW fields in general 3D geometries has been avoided due to the large computational cost associated with the numerical approximation of the Helmholtz equation. Recent developments in computing capacity together with improvements in finite element type modeling techniques are making possible wave simulations in 3D geometries which reach over tens of wavelengths. The aim of this study is to investigate the feasibility of a full-wave solution of the 3D Helmholtz equation for modeling of continuous-wave ultrasound fields in an inhomogeneous medium. The numerical approximation of the Helmholtz equation is computed using the ultraweak variational formulation (UWVF) method. In addition, an inverse problem technique is utilized to reconstruct the velocity distribution on the transducer which is used to model the sound source in the UWVF scheme. The modeling method is verified by comparing simulated and measured fields in the case of transmission of 531 kHz CW fields through layered plastic plates. The comparison shows a reasonable agreement between simulations and measurements at low angles of incidence but, due to mode conversion, the Helmholtz model becomes insufficient for simulating ultrasound fields in plates at large angles of incidence.     

Consideration of the evolution of the Saccharomyces cerevisiae MEL gene family on the basis of the nucleotide sequences of the genes and their flanking regions

Analysis of the DNA sequences of new members of the Saccharomyces cerevisiae MEL1-MEL10 gene family showed high homology between the members. The MEL gene family, α-galactosidase-coding sequences, have diverged into two groups; one consisting of MEL1 and MEL2 and the other of MEL3-MEL10. In two S. cerevisiae strains containing five or seven MEL genes each, all the genes are nearly identical, suggesting very rapid distribution of the gene to separate chromosomes. The sequence homology and the abrupt change to sequence heterogeneity at the centromere-proximal 3′ end of the MEL genes suggest that the distribution of the genes to new chromosomal locations has occurred partly by reciprocal recombination at solo delta sequences. We identified a new open reading frame sufficient to code for a 554 amino acid long protein of unknown function. The new open reading frame (Accession number Z37509) is located in the 3′ non-coding region of MEL3-MEL10 genes in opposite orientation to the MEL genes (Accession numbers Z37508, Z37510, Z37511). Northern analysis of total RNA showed no hybridization to a homologous probe, suggesting that the gene is not expressed efficiently if at all.     

Wavelet-based reconstruction for limited-angle X-ray tomography

The aim of X-ray tomography is to reconstruct an unknown physical body from a collection of projection images. When the projection images are only available from a limited angle of view, the reconstruction problem is a severely ill-posed inverse problem. Statistical inversion allows stable solution of the limited-angle tomography problem by complementing the measurement data by a priori information. In this work, the unknown attenuation distribution inside the body is represented as a wavelet expansion, and a Besov space prior distribution together with positivity constraint is used. The wavelet expansion is thresholded before reconstruction to reduce the dimension of the computational problem. Feasibility of the method is demonstrated by numerical examples using in vitro data from mammography and dental radiology.