Viscous Open Data: The Roles of Intermediaries in an Open Data Ecosystem

Open data have the potential to improve the governance of universities as public institutions. In addition, open data are likely to increase the quality, efficacy and efficiency of the research and analysis of higher education systems by providing a shared empirical base for critical interrogation and reinterpretation. Drawing on research conducted by the Emerging Impacts of Open Data in Developing Countries project, and using an ecosystems approach, this research paper considers the supply, demand and use of open data as well as the roles of intermediaries in the governance of South African public higher education. It shows that government's higher education database is a closed and isolated data source in the data ecosystem; and that the open data that are made available by government is inaccessible and rarely used. In contrast, government data made available by data intermediaries in the ecosystem are being used by key stakeholders. Intermediaries are found to play several important roles in the ecosystem: (i) they increase the accessibility and utility of data; (ii) they may assume the role of a “keystone species” in a data ecosystem; and (iii) they have the potential to democratize the impacts and use of open data. The article concludes that despite poor data provision by government, the public university governance open data ecosystem has evolved because intermediaries in the ecosystem have reduced the viscosity of government data. Further increasing the fluidity of government open data will improve access and ensure the sustainability of open data supply in the ecosystem.     

Robust h-index

Scientometrics - The h-index is the most used measurement of impact for researchers. Sites such as Web of Science, Google Scholar, Microsoft Academic, and Scopus leverage it to show and compare the...     

THE VITREOUS STATE*

The difficulty of defining the vitreous state in a rigorous manner, the existence of many borderline cases, and the theoretical requirements which must be met if a substance is to be vitreous are discussed. Silicate glasses and certain other typical classes of vitreous substances are treated in some detail with especial reference to the relation between their structures and vitreous properties.     

Toward green dialysis: Focus on water savings

Hemodialysis is one of the most water and energy‐hungry medical procedures, and thus represents a clear opportunity where improvements should be made concerning the consumption and wastage of water. Three levels were investigated on which there are potential savings: the precise adjustment of water production according to specific needs, the reuse of reverse osmosis rejected water, and finally the huge volumes of post‐patient dialysate effluent. The “AURAL” (Association pour l′Utilisation du Rein Artificiel à Lyon), main unit in Lyon, was the site of investigation for this study, which cares for 173 chronic hemodialysis patients. Evaluation of the 3 levels described earlier was undertaken on this particular building, and on the water treatment currently used. Volumes of produced water can be improved by different hydraulic systems or by adjusting the pure water conductivity used for dialysis. Concerning the reject water, reuse for building sanitation became the focus of further attention. The technical feasibility, volume of saved water, and applicable work costs were considered. The results suggest that out of a possible 2834 m³/year of reject water, 1200 m³/year may be reused and return on investment recovered within 5.8 years. Finally, the reprocessing and feasibility of reuse of dialysate effluent were investigated. Initial calculations show that although technical solutions are available, such processing of the wastewater production is not profitable in the short term. Regarding the significant prior authorization and risk management analysis necessary for such a project, this avenue was pursued no further. From the perspective of a “green dialysis,” the reuse of reject water into sanitation is both viable and profitable in our unit, and must be the next step of our project. More widely, improvements can be made by defining a more precise range of pure water conductivity for dialysis and by applying reuse water project to new or to be renovated units.     

On the improvement of network resource utilization efficiency for the establishment of static dependable connections in SRLG-constrained WDM translucent networks

In this paper, we investigate the problem of establishing static connections with fault-tolerant requirements, also known as dependable connections, taking into account quality of transmission constraints. To the best of our knowledge, this is the first study that tackles the aforementioned problem under shared risk link group (SRLG) constraints in translucent WDM optical mesh networks where typically a set of strategically localized network nodes are equipped with regeneration capability to overcome physical-layer impairment effects. A novel cross-layer heuristic approach is introduced to solve the problem for an heterogeneous networked scenario relying on a cost-effective two-stage protection procedure which combines the well-known path protection and partial path protection schemes in order to ensure instantaneous recovery from any SRLG-failure event. The proposed heuristic integrates a generic auxiliary graph model that incorporates various network heterogeneity factors such as the number of transceivers at each network node, the number of wavelengths on each fiber link, and the regeneration capability of each node, represented by different edges in the constructed graph. Moreover, the integrated auxiliary graph can be applied efficiently to model either single- or mixed-line-rate translucent WDM optical networks wherein different modulation formats are employed in order to support the transmission at different line rates. Our solution approach aims at maximizing the total number of accommodated requests by reducing network resource consumption through the simultaneous use of the backup–backup and primary–backup multiplexing techniques. We, here, present extended versions of these two techniques that generalize the sharing concept to some other important node resources—specifically, regeneration equipments which constitute the major cost factor in optical transport networks—in addition to link resources (i.e., wavelength channels). As far as we know, this is the first attempt to deploy simultaneously generalized versions of the backup–backup and primary–backup multiplexing techniques when considering static traffic patterns without compromising the 100 % fault-recoverability guarantee. The performances of the proposed heuristic are evaluated and discussed through extensive numerical experiments carried out on different network topologies. Significant improvements are demonstrated, either in terms of network blocking performance or in terms of resource utilization efficiency, in comparison with previously proposed approaches.     

Statistical tolerance analysis of a hyperstatic mechanism,using system reliability methods

The quality level of a mechanism can be evaluated a posteriori after several months by following the number of warranty returns. However, it is more interesting to evaluate a predicted quality level in the design stage: this is one of the aims of statistical tolerance analysis. A possible method consists of computing the defect probability (P_D) expressed in ppm. It represents the probability that a functional requirement will not be satisfied in mass production. For assembly reasons, many hyperstatic mechanisms require gaps, which their functional requirements depend on. The defect probability assessment of such mechanisms is not straightforward, and requires advanced numerical methods. This problem particularly interests the VALEO W.S. company, which experiences problems with an assembly containing gaps. This paper proposes an innovative methodology to formulate and compute the defect probability of hyperstatic mechanisms with gaps in two steps. First, a complex feasibility problem is converted into a simpler problem. Then the defect probability is efficiently computed thanks to system reliability methods and the m-dimensional multivariate normal distribution Φ_m. Finally, a sensitivity analysis is provided to improve the original design. The whole approach is illustrated with an industrial case study, but can be adapted to other similar problems.     

Identification of Desirable Precursor Properties for Solution Precursor Plasma Spray

In solution precursor plasma spray chemical precursor solutions are injected into a standard plasma torch and the final material is formed and deposited in a single step. This process has several attractive features, including the ability to rapidly explore new compositions and to form amorphous and metastable phases from molecularly mixed precursors. Challenges include: (a) moderate deposition rates due to the need to evaporate the precursor solvent, (b) dealing on a case by case basis with precursor characteristics that influence the spray process (viscosity, endothermic and exothermic reactions, the sequence of physical states through which the precursor passes before attaining the final state, etc.). Desirable precursor properties were identified by comparing an effective precursor for yttria-stabilized zirconia with four less effective candidate precursors for MgO:Y₂O₃. The critical parameters identified were a lack of major endothermic events during precursor decomposition and highly dense resultant particles.     

Effect of pasture versus indoor feeding systems on quality characteristics,nutritional composition,and sensory and volatile properties of full-fat Cheddar cheese

The purpose of this study was to investigate the effects of pasture-based versus indoor total mixed ration (TMR) feeding systems on the chemical composition, quality characteristics, and sensory properties of full-fat Cheddar cheeses. Fifty-four multiparous and primiparous Friesian cows were divided into 3 groups (n = 18) for an entire lactation. Group 1 was housed indoors and fed a TMR diet of grass silage, maize silage, and concentrates; group 2 was maintained outdoors on perennial ryegrass only pasture (GRS); and group 3 was maintained outdoors on perennial ryegrass/white clover pasture (CLV). Full-fat Cheddar cheeses were manufactured in triplicate at pilot scale from each feeding system in September 2015 and were examined over a 270-d ripening period at 8°C. Pasture-derived feeding systems were shown to produce Cheddar cheeses yellower in color than that of TMR, which was positively correlated with increased cheese β-carotene content. Feeding system had a significant effect on the fatty acid composition of the cheeses. The nutritional composition of Cheddar cheese was improved through pasture-based feeding systems, with significantly lower thrombogenicity index scores and a greater than 2-fold increase in the concentration of vaccenic acid and the bioactive conjugated linoleic acid C18:2 cis-9,trans-11, whereas TMR-derived cheeses had significantly higher palmitic acid content. Fatty acid profiling of cheeses coupled with multivariate analysis showed clear separation of Cheddar cheeses derived from pasture-based diets (GRS or CLV) from that of a TMR system. Such alterations in the fatty acid profile resulted in pasture-derived cheeses having reduced hardness scores at room temperature. Feeding system and ripening time had a significant effect on the volatile profile of the Cheddar cheeses. Pasture-derived Cheddar cheeses had significantly higher concentrations of the hydrocarbon toluene, whereas TMR-derived cheese had significantly higher concentration of 2,3-butanediol. Ripening period resulted in significant alterations to cheese volatile profiles, with increases in acid-, alcohol-, aldehyde-, ester-, and terpene-based volatile compounds. This study has demonstrated the benefits of pasture-derived feeding systems for production of Cheddar cheeses with enhanced nutritional and rheological quality compared with a TMR feeding system.     

Functionalization of Polymer Surfaces Using Excimer VUV Systems and Silent Discharges. Application to Electroless Metallization

New approaches for electroless plating of nonconductive polymers or polymer-based materials are described. In this work, polyimide substrates were surface-functionalized (i) in nitrogenated (ammonia at reduced pressure) and oxygenated (air at atmospheric pressure) atmospheres under assistance of vacuum-ultraviolet (VUV) irradiation (use of a xenon silent discharge excimer source) or (ii) directly in air at atmospheric pressure using a dielectric-barrier discharge (DBD) device. After functionalization, the substrates were “activated” by dipping in a dilute acidic PdCl₂ solution or by spin-coating of a thin metal-organic film (from a solution of palladium acetate (PdAc) in chloroform). The catalytic activity of the so-deposited palladium species toward the electroless deposition of nickel was studied before and after a VUV post-irradiation (in air at atmospheric or reduced pressure) with a view to understanding better the role of the reducer (sodium hypophosphite) within the electroless bath.

This work confirms the specific interest of grafting nitrogenated functionalities onto polymer surfaces for attaching covalently the palladium-based catalyst (in particular in the case of the PdCl₂ route), forming thus strong Pd - N - C bonds at the metal/polymer interface. This results from the strong chemical affinity of palladium toward nitrogen. On the other hand, when oxygenated functionalities are surface-grafted, the conventional two-step procedure using SnCl₂ and PdCl₂ solutions can be proposed due to the strong chemical affinity of tin toward oxygen. The Ni deposits obtained under these different conditions pass the standard Scotch^®-tape test and, therefore, exhibit a good practical adhesion. For this same purpose, it is interesting to note that the DBD treatment operating in air at atmospheric pressure causes an increase of the surface roughness and, therefore, an improvement in adhesion of metallic films when their initiation is catalyzed through the PdAc route. In addition, this work demonstrates that extensive research still has to be performed to understand and improve the Ni/polymer adhesion when the PdAc route associated with a VUV irradiation is considered.