Pressure effects on shear deformation of borosilicate glasses

The shear behaviors of two multicomponent borosilicate glasses, Borofloat®33 (Boro33) and N-BK7® (N-BK7), under different pressures are investigated using molecular dynamics simulations. The addition of alkali ions lowers the yield stress and changes the pressure dependence of shear modulus. Shear-induced densification is observed in both glasses. It is found that the decreases of the oxygen-centered bond angle and the coordination number change of B are responsible for the density changes at low pressures, and the increase of 5-coordinated Si is the dominant mechanism for densification at high pressures. The average shear stresses experienced by Si and B decrease with pressure except that the flow stress of Si at the end of shear deformation in N-BK7. Moreover, the average shear stress of B is more sensitive to the applied pressures compared to Si, suggesting that B is able to relax mechanical stress more easily under pressurized-shear. By analyzing the nonaffine displacement of atoms, it is found that N-BK7 exhibits more localized plastic deformation compared to Boro33 at low pressures and the local rearrangements in both glasses become more homogeneous with increasing pressure. The mean squared nonaffine displacement curves show that alkali ions have the highest mobility induced by shear compared to the network formers and B is more mobile than Si for both glasses. We also observed that plastic deformation tends to take place around boron atoms for Boro33, whereas it occurs in the alkali-rich regions for N-BK7, indicating that these two glasses have different atomic-scale deformation mechanisms.     

Atomic-scale mechanisms of densification in cold-compressed borosilicate glasses

Knowledge of the underlying structural response during deformation processes is essential for understanding the macroscopic mechanical response of glass. Here we present results from cold compression-decompression molecular dynamics (MD) simulations of two multicomponent borosilicate glasses, Borofloat^®33 (Boro33) and N-BK7^® (N-BK7). Our results suggest that the densification of these two borosilicate glasses involves different types of structural changes. The fraction of permanent densification can be correlated to the change in intermediate-range structure. By performing Voronoi analysis, we quantify the contributions to densification from different cation types in these two multicomponent borosilicate glasses, finding that 3-coordinated cations facilitate the densification process. Higher-coordinated cations are relatively stable and can even show a slight expansion in their Voronoi volume.     

Effects of acid leaching treatment of soda-lime silicate glass on crack initiation and fracture

Water or acid soaking surface treatments have been shown to increase the mechanical strength of soda-lime silicate (SLS) glasses. This increase in strength has traditionally been attributed to effects related to residual stress or changes in fracture resistance. In this work, we report experimental data that cannot be explained based on the existing knowledge of glass surface mechanics. In dry environments, annealed and acid-leached SLS surfaces have comparable crack initiation stress and fracture stress as measured by Hertzian indentation and biaxial bending tests, respectively. Yet, in the presence of humidity, acid-leached surfaces have higher failure stress than the annealed surfaces. This apparent enhancement in the crack resistance of the acid-leached surface of SLS glass in humid environments supports the hypothesis that acid-leached surface chemistry can lower the transport kinetics of molecular water to critical flaws.     

Cold sintering of diatomaceous earth

Diatomite, a natural silicate-based sedimentary rock, was densified by cold sintering at room temperature and 150°C under various pressures (100, 200, and 300 MPa) and using different NaOH water solutions (0–3 M). The relative density of cold sintered diatomite can be as high as 90%, a condition that can be achieved by conventional firing only at 1200–1300°C. The cold sintered materials maintain the same mineralogical composition of the starting powder (quartz, glass, and illite) and are constituted by well-deformed and flattened grains oriented orthogonally to the applied pressure. Conversely, an evident phase evolution takes place upon conventional firing with the formation of cristobalite and mullite. The bending strength of cold sintered artifacts can exceed 40 MPa and increases to ≈80 MPa after post-annealing at 800°C, such mechanical strength is much larger than that of conventionally pressed samples sintered at 800°C, which is only ≈1 MPa.     

High Glucose Exposure Impairs L-Cell Differentiation in Intestinal Organoids: Molecular Mechanisms and Clinical Implications

Intestinal organoids are used to analyze the differentiation of enteroendocrine cells (EECs) and to manipulate their density for treating type 2 diabetes. EEC differentiation is a continuous process tightly regulated in the gut by a complex regulatory network. However, the effect of chronic hyperglycemia, in the modulation of regulatory networks controlling identity and differentiation of EECs, has not been analyzed. This study aimed to investigate the effect of glucotoxicity on EEC differentiation in small intestinal organoid platforms. Mouse intestinal organoids were cultured in the presence/absence of high glucose concentrations (35 mM) for 48 h to mimic glucotoxicity. Chronic hyperglycemia impaired the expression of markers related to the differentiation of EEC progenitors (Ngn3) and L-cells (NeuroD1), and it also reduced the expression of Gcg and GLP-1 positive cell number. In addition, the expression of intestinal stem cell markers was reduced in organoids exposed to high glucose concentrations. Our data indicate that glucotoxicity impairs L-cell differentiation, which could be associated with decreased intestinal stem cell proliferative capacity. This study provides the identification of new targets involved in new molecular signaling mechanisms impaired by glucotoxicity that could be a useful tool for the treatment of type 2 diabetes.     

Photoprotective Role of Photosynthetic and Non-Photosynthetic Pigments in Phillyrea latifolia: Is Their “Antioxidant” Function Prominent in Leaves Exposed to Severe Summer Drought?

Carotenoids and phenylpropanoids play a dual role of limiting and countering photooxidative stress. We hypothesize that their “antioxidant” function is prominent in plants exposed to summer drought, when climatic conditions exacerbate the light stress. To test this, we conducted a field study on Phillyrea latifolia, a Mediterranean evergreen shrub, carrying out daily physiological and biochemical analyses in spring and summer. We also investigated the functional role of the major phenylpropanoids in different leaf tissues. Summer leaves underwent the most severe drought stress concomitantly with a reduction in radiation use efficiency upon being exposed to intense photooxidative stress, particularly during the central hours of the day. In parallel, a significant daily variation in both carotenoids and phenylpropanoids was observed. Our data suggest that the morning-to-midday increase in zeaxanthin derived from the hydroxylation of ß-carotene to sustain non-photochemical quenching and limit lipid peroxidation in thylakoid membranes. We observed substantial spring-to-summer and morning-to-midday increases in quercetin and luteolin derivatives, mostly in the leaf mesophyll. These findings highlight their importance as antioxidants, countering the drought-induced photooxidative stress. We concluded that seasonal and daily changes in photosynthetic and non-photosynthetic pigments may allow P. latifolia leaves to avoid irreversible photodamage and to cope successfully with the Mediterranean harsh climate.     

Xyloglucan Oligosaccharides Hydrolysis by Exo-Acting Glycoside Hydrolases from Hyperthermophilic Microorganism Saccharolobus solfataricus

In the field of biocatalysis and the development of a bio-based economy, hemicellulases have attracted great interest for various applications in industrial processes. However, the study of the catalytic activity of the lignocellulose-degrading enzymes needs to be improved to achieve the efficient hydrolysis of plant biomasses. In this framework, hemicellulases from hyperthermophilic archaea show interesting features as biocatalysts and provide many advantages in industrial applications thanks to their stability in the harsh conditions encountered during the pretreatment process. However, the hemicellulases from archaea are less studied compared to their bacterial counterpart, and the activity of most of them has been barely tested on natural substrates. Here, we investigated the hydrolysis of xyloglucan oligosaccharides from two different plants by using, both synergistically and individually, three glycoside hydrolases from Saccharolobus solfataricus: a GH1 β-gluco-/β-galactosidase, a α-fucosidase belonging to GH29, and a α-xylosidase from GH31. The results showed that the three enzymes were able to release monosaccharides from xyloglucan oligosaccharides after incubation at 65 °C. The concerted actions of β-gluco-/β-galactosidase and the α-xylosidase on both xyloglucan oligosaccharides have been observed, while the α-fucosidase was capable of releasing all α-linked fucose units from xyloglucan from apple pomace, representing the first GH29 enzyme belonging to subfamily A that is active on xyloglucan.     

Reduced‐scale test to assess the effect of fire barriers on the flaming combustion of cored composites: An upholstery‐material case study

Herein, we describe a reduced‐scale test (“Cube” test), measuring the fire performance of specimens including a fire barrier (FB) and a flammable core material, which acts as the main fuel load. The specimen is intended to reproduce a cross‐section of a composite product where heat/mass transfer occurs primarily in a direction perpendicular to the FB. The Cube test procedure and benefits are discussed in this work by adopting residential upholstery furniture as an exemplary study. One flexible polyurethane foam, one polypropylene cover fabric, and 10 commercially available FBs were selected. They were used to compare the fire performance of FBs, measured in terms of peak of heat release rate, in the ASTM E1474‐14 standard test and the newly developed Cube test. Edge effects severely affected the performance of FBs in the ASTM E1474‐14 standard test but not in the Cube test. Furthermore, appropriate test conditions were determined in the Cube test to measure the so‐called “wetting point,” that is, the time and value of heat release rate measured when flammable liquid products were first observed on the bottom of the specimen. The relevance of the “wetting point” in terms of full‐scale fire performance and failure mechanism of FBs is discussed.     

CHEMICAL ANALYSIS OF HIGH ASH BRAZILIAN COAL TAR. 3. HYDROCARBON CHARACTERIZATION

Abstract

In this paper we show the total analysis of the hydrocarbon fractions obtained from the chromatographic fractionation of a coal tar cut, previously described. All fractions were analyzed by Gas Chromatography coupled to Mass Spectrometry using a non-polar capillary column. A group-type distribution of aliphatic, olefins and monoaromatic hydrocarbons was found in the first three fractions obtained (I, II and III). In fractions IV and V polyaromatics with two or more condensed rings were founded. Many of these hydrocarbons are recognized to be carcinogenic and mutagenic, including pyrene, chrysene and others.     

Curvature Ratio Effect on Two-Phase Pressure Drops in Horizontal Return Bends: Experimental Data for R134a

This article presents 154 pressure drop data points measured during two-phase flow of R-134a in horizontal return bends. The tube diameter is constant at 10.85 mm and the curvature ratio is either 7.74 or 5.53. Saturation temperature varies from 15 to 20°C, vapor quality from 0.05 and 0.95, and mass velocity ranges from 300 to 600 kg m^?2 s^?1. Return bend pressure drops are calculated by subtracting the straight tube pressure drop from the total measured pressure drop along the bend. The perturbations induced up- and downstream of the singularity are taken into account in the measurements. The comparison of the pressure drops for the two configurations (curvature ratio of 5.53 and 7.74) showed that they are greater (about 10%) for the larger curvature ratio. This can be attributed to the effect of the developed length on the pressure drop; on the other side the pressure gradients are larger for the lower curvature ratio, which can be explained by the effect of the centrifugal force and the perturbations up- and downstream of the return bend. The experimental data are compared against four prediction methods available in the literature. The Domanski and Hermès correlation is the best at predicting the present data.