An embedded optical tracking system for motion-corrected magnetic resonance imaging at 7T

Object

Prospective motion correction using data from optical tracking systems has been previously shown to reduce motion artifacts in MR imaging of the head. We evaluate a novel optical embedded tracking system.

Materials and methods

The home-built optical embedded tracking system performs image processing within a 7T scanner bore, enabling high speed tracking. Corrected and uncorrected in vivo MR volumes are acquired interleaved using a modified 3D FLASH sequence, and their image quality is assessed and compared.

Results

The latency between motion and correction of the slice position was measured to be (19?±?5)?ms, and the tracking noise has a standard deviation no greater than 10???m/0.005° during conventional MR scanning. Prospective motion correction improved the edge strength by 16?% on average, even though the volunteers were asked to remain motionless during the acquisitions.

Conclusion

Using a novel method for validating the effectiveness of in vivo prospective motion correction, we have demonstrated that prospective motion correction using motion data from the embedded tracking system considerably improved image quality.     

Crosslinking of addition copolymers from tricyclononenes bearing (CH3)3Si‐ and (C2H5O)3Si‐groups as a modification of membrane gas separation materials

Here, we report the synthesis and the study of gas‐transport properties of crosslinked highly permeable copolymers from Si‐containing norbornene derivatives. The initial high‐molecular‐weight copolymers were prepared via addition copolymerization of 3‐trimethylsilyltricyclo[4.2.1.0^2,5]non‐7‐ene (TCNSi1) with 3‐triethoxysilyltricyclo[4.2.1.0^2,5]non‐7‐ene (TCNSiOEt) in good or high yields using a Pd‐catalyst. The obtained copolymers included up to 10 mol% of TCNSiOEt units bearing reactive Si–O–C‐containing substituents. The crosslinking was readily realized by using simple sol–gel chemistry in the presence of Sn‐catalyst. The formed crosslinked copolymers were insoluble in common organic solvents. Permeability coefficients of various gases (He, H₂, O₂, N₂, CO₂, CH₄, C₂H₆, C₃H₈, n‐C₄H₁₀) in these copolymers before and after crosslinking were determined and the influence of the incorporated TCNSiOEt units as well as the crosslinking on gas transport properties were established. As a result, it was found that only a small reduction of gas‐permeability was observed when TNCSiOEt units were incorporated into the main chains, and the copolymers were crosslinked. At the same time, the selectivity for C₄H₁₀/CH₄ pair was increased. The suggested approach has allowed obtaining crosslinked polymers from Si‐containing monomers without a loss of the main membrane characteristics. POLYM. ENG. SCI., 59:2502–2507, 2019. © 2019 Society of Plastics Engineers     

Adsorption of the IFKhAN-92 Inhibitor on Chromium–Nickel Steel from Mineral Acid Solutions

Protection of Metals and Physical Chemistry of Surfaces - Impedance spectroscopy was used to study the adsorption of the IFKhAN-92 inhibitor, a triazole derivative, on cathodically polarized...     

Preparation of Exfoliated Graphite Modified with Magnesium Ferrite

A magnetic sorbent based on exfoliated graphite modified with magnesium ferrite has been prepared by impregnating oxidized graphite in a mixed solution of FeCl₃ and Mg(NO₃)₂, followed by heat treatment of the impregnated oxidized graphite in air. X-ray diffraction and Mössbauer spectroscopy results demonstrate that the structure of the magnesium ferrite is an inverse spinel with a degree of inversion of 0.59. The saturation magnetization of the magnesium ferrite-containing exfoliated graphite is 16.1 emu/g, whereas its oil sorption capacity is as high as 54 g/g. Compaction of the exfoliated graphite to a density of 0.03 g/cm³ reduced its sorption capacity to 26 g/g. Further increasing the density of the material led to a considerable decrease in its sorption capacity.     

Graphene oxide conversion into controllably carboxylated graphene layers via photoreduction process in the inert atmosphere

Abstract

The one-step method for graphene oxide (GO) simultaneous reduction and carboxylation via ultraviolet irradiation in the inert atmosphere has been reported. X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS) data revealed that the proposed approach allows to obtain reduced graphene oxide (rGO) films, containing up to 10 at.% of carboxyl groups. The carboxyl groups concentration can be tuned within the range of 3 to 10 at.% by controlling the oxidation degree of the irradiated GO via the preliminary low-temperature air heating. Furthermore, no carboxylation effect is observed in the case of irradiation of the completely reduced GO films. This coincides with our previous results, validating the proposed model of GO carboxylation based on photoinduced conversion of basal-plane hydroxyl groups and ketones into carboxyl ones. Despite a different degree of carboxylation, all the obtained samples demonstrate almost complete elimination of basal plane groups and restoration of the graphene flakes aromatic structure. This fact is emphasized by the sheet resistance measurements, demonstrating that the obtained C-xy graphene exhibits high electrical conductivity. As a net result, the material obtained by the presented method shows promising applications in the manufacturing of biosensor transducers owing to both its conductive nature and presence of carboxyl groups, playing the role of the anchoring points for biomolecules.     

MidDRIFTS-PLSR-based quantification of physico-chemical soil properties across two agroecological zones in Southwest Germany: generic independent validation surpasses region specific cross-validation

Development of spectroscopic prediction models via partial least squares regression (PLSR) suggests that model performance is highly affected by means of calibration and nature of the dataset. This study compares the predictive performance of PLSR models obtained by cross-validation and independent validation to quantify physico-chemical soil properties from their mid-infrared diffuse reflectance Fourier transform spectra (midDRIFTS) across two contrasting regions, Kraichgau (K) and Swabian Alb (SA), in Southwest Germany. We evaluated the capability of midDRIFTS-PLSR models for predicting total carbon (TC), organic carbon (TOC), inorganic carbon (TIC), nitrogen (TN), mineral N (N_min), C:N ratio, hot water extractable C and N (C_HWE, N_HWE), microbial biomass C and N (C_mic, N_mic), pH, bulk density, and clay, silt and sand contents of 126 soil samples. Based on calibrated models, most soil properties were predicted successfully using either calibration approach with residual prediction deviations ≥3 and R² > 0.9, except for N_min, C/N ratio, pH, bulk density and sand. However, predictive performance of generic independent validation derived models (GIC) of test set was considerably higher than generic cross-validation models. Validation using GIC models gave relatively the same predictive performance with those obtained in calibration except for N_min. Validation of region specific cross-validated models, however, resulted in successful predictions only for TC, TIC, TOC and TN in SA and TC and TIC and TOC in K. Our results show the superiority of independent validation over both generic and region specific cross-validation as a robust tool for predicting soil properties without further laboratory measurements.     

Ultra-Robust Flexible Electronics by Laser-Driven Polymer-Nanomaterials Integration

Polyethylene terephthalate (PET) is the most widely used polymer in the world. For the first time, the laser-driven integration of aluminum nanoparticles (Al NPs) into PET to realize a laser-induced graphene/Al NPs/polymer composite, which demonstrates excellent toughness and high electrical conductivity with the formation of aluminum carbide into the polymer is shown. The conductive structures show an impressive mechanical resistance against >10000 bending cycles, projectile impact, hammering, abrasion, and structural and chemical stability when in contact with different solvents (ethanol, water, and aqueous electrolytes). Devices including thermal heaters, carbon electrodes for energy storage, electrochemical and bending sensors show this technology's practical application for ultra-robust polymer electronics. This laser-based technology can be extended to integrating other nanomaterials and create hybrid graphene-based structures with excellent properties in a wide range of flexible electronics’ applications.     

Thermal stability of the nanolayered Fe2AlB2 in nitrogen and argon atmospheres

The thermal stability and decomposition mechanisms of Fe₂AlB₂ powders, synthesized by reactive powder metallurgy, were studied under nitrogen (N₂) or argon (Ar) atmospheres. The effects of using different FeB precursors to synthesize the Fe₂AlB₂ and hydrochloric acid (HCl) purification treatments on the thermal stability were also investigated. When as-synthesized Fe₂AlB₂ powders are treated in dilute HCl to dissolve impurity phases, decomposition in N₂ atmospheres occurs readily above 1200 K. The decomposition reaction involves β-FeB precipitation and the liberated Al atoms reacting with the ambient N₂ to form AlN. Under Ar environments, HCl-treated Fe₂AlB₂ powders decompose and precipitate β-FeB, by the out-diffusion of Al from the nanolaminated structure. Interestingly, isothermal annealing under N₂ atmospheres revealed that Fe₂AlB₂ was more thermally stable when synthesized from lab-synthesized, instead of commercially available, FeB precursors and when the HCl treatment was avoided. The effects of the various factors on the decomposition temperature and decomposition mechanisms are discussed herein.     

Determining the Characteristics of Cosmic-Radiation Nuclei in the Sileye Experiment on Board the Mir Orbital Station

An algorithm for reconstructing the characteristics (charge, mass, and energy) of cosmic-radiation nuclei with 20- to 200-MeV/nucleon energies is described. The detector is a telescope of three two-coordinate planes with two 1-mm-thick iron filters inserted between them. Each plane is composed of two strip silicon detectors with 3.6-mm-wide orthogonally oriented strips, an effective area of 6 × 6 cm², and a thickness of 380 m. The algorithm for reconstructing the nuclei characteristics is based on the analysis of how the specific ionization losses change as the nuclei pass through the filter material. The results of the Monte Carlo simulation are presented for the energy dependence of the telescope acceptance and the energy deposited in the detectors by different nuclei in view of the detector calibration on the nuclear beams of the accelerator. The mass resolution of the telescope is 30, 12, and 5% for He, N, and Al nuclei, respectively. The energy resolution, which is 20%, is much the same for all nuclei.