Sinter-Forging of Nanocrystalline Zirconia: II, Simulation

A quantitative computer simulation of densification, pore-size evolution, and grain growth during sinter-forging has been developed and applied to the sinter-forging of nanocrystalline yttria (30 mol%)-stabilized zirconia (3Y-TZP) at 1050° and 1100°C. Densification is simulated as a superposition of stress-assisted and plastic-strain-controlled pore-shrinkage mechanisms. Grain growth is simulated as a pore-controlled process during intermediate-stage densification and as a combination of normal (static) grain growth and dynamic grain growth during final-stage densification. The densification portion of the model offers very good agreement with the experiment under a wide variety of imposed forging conditions, despite the absence of adjustable variables. Grain-growth predictions qualitatively illustrate a key feature in the sinter-forging of 3Y-TZP: i.e., the minimization of grain size, as a function of density, under forging conditions that promote high strain rates. This particular effect seems to be due to the quick elimination of large pores by plastic strain while small pores (which shrink by diffusion) are still available to control grain growth.     

Effect of chirality, release rate, and host volatiles on response of Tetropium fuscum (F.), Tetropium cinnamopterum Kirby, and Tetropium castaneum (L.) to the aggregation pheromone, fuscumol

The male-produced aggregation pheromones of Tetropium fuscum (F.) and T. cinnamopterum Kirby were identified as (2S,5E)-6,10-dimethyl-5,9-undecadienol by chemical analysis, synthesis, electronantennography, and field trapping; the compound is here renamed “fuscumol”. The effect of fuscumol chirality, alone or with host volatiles, and fuscumol release rate on Tetropium spp. was tested in field-trapping experiments in Nova Scotia and Poland. Both (S)-fuscumol and racemic fuscumol synergized trap catches of male and female T. fuscum, T. cinnamopterum, and T. castaneum (L.) when combined with a blend of host monoterpenes and ethanol. Without added host volatiles, fuscumol was either unattractive (in Nova Scotia) or only slightly so (in Poland). (R)-Fuscumol, alone or in combination with host volatiles, did not elicit increases in trap capture of any Tetropium species, relative to the controls. Fuscumol synergized attraction of both sexes to host volatiles, thus indicating it acts as an aggregation pheromone. Sex ratio was often female-biased in traps baited with fuscumol plus host volatiles, and was either unbiased or male-biased in traps with host volatiles alone. In traps with host volatiles and racemic fuscumol, mean catches of Tetropium species were unaffected by fuscumol release rates ranging from 1 to 32 mg/d. The attraction of three different Tetropium species to the combination of (S)-fuscumol and host volatiles suggests that cross-attraction may occur where these species are sympatric, and that reproductive isolation possibly occurs via differences in close-range cues. These results have practical applications for survey and monitoring of T. fuscum, a European species established in Nova Scotia since at least 1980, and for early detection of T. castaneum, a European species not presently established in North America.     

Directed Recovery and Molecular Characterization of Antibiotic Resistance Plasmids from Cheese Bacteria

Resistance to antimicrobials is a growing problem of worldwide concern. Plasmids are thought to be major drivers of antibiotic resistance spread. The present work reports a simple way to recover replicative plasmids conferring antibiotic resistance from the bacteria in cheese. Purified plasmid DNA from colonies grown in the presence of tetracycline and erythromycin was introduced into plasmid-free strains of Lactococcus lactis, Lactiplantibacillus plantarum and Lacticaseibacillus casei. Following antibiotic selection, the plasmids from resistant transformants were isolated, analyzed by restriction enzyme digestion, and sequenced. Seven patterns were obtained for the tetracycline-resistant colonies, five from L. lactis, and one each from the lactobacilli strains, as well as a single digestion profile for the erythromycin-resistant transformants obtained in L. lactis. Sequence analysis respectively identified tet(S) and ermB in the tetracycline- and erythromycin-resistance plasmids from L. lactis. No dedicated resistance genes were detected in plasmids conferring tetracycline resistance to L. casei and L. plantarum. The present results highlight the usefulness of the proposed methodology for isolating functional plasmids that confer antibiotic resistance to LAB species, widen our knowledge of antibiotic resistance in the bacteria that inhabit cheese, and emphasize the leading role of plasmids in the spread of resistance genes via the food chain.     

Identification of tet(M) in two Lactococcus lactis strains isolated from a Spanish traditional starter-free cheese made of raw milk and conjugative transfer of tetracycline resistance to lactococci and enterococci

Specific PCR and sequencing showed that a tet(M) gene was present in two tetracycline-resistant Lactococcus lactis strains isolated from a raw milk, starter-free cheese. Hybridisation experiments using as a probe an internal segment of the gene obtained by PCR associated tet(M) with plasmids of around the same size (30 kbp) in both strains. Molecular analysis of the tetracycline resistance loci, including the upstream and downstream regions of the genes, showed them to be identical to one other and to the tet(M) encoded by the conjugative transposon Tn916. Amplification of Tn916-derived segments suggested the transposon was complete in the two L. lactis strains. Further, curing of the tetracycline resistance was accompanied by a reduction in size of the plasmids comparable to that expected for Tn916. Tetracycline resistance could be transferred by conjugation to plasmid-free Lactococcus and Enterococcus strains. However, no plasmid DNA was detected among the transconjugants while both tet(M) and transposon-related sequences were amplified by PCR. This suggested that only the transposon was mobilized.     

CATALYTIC CRACKING OF RESIDUAL PETROLEUM FRACTIONS

ABSTRACT

Arabian Light crude oil vacuum bottoms has been fractionated into five high-boiling fractions by wiped film evaporation, and the fractions subjected to catalytic cracking in a fixed-fluidized bed using a commercial equilibrium cracking catalyst. Density, aromaticity, and heteroatom content generally increased with boiling point, as did metals content except for vanadium and iron which demonstrated possible bimodal distributions. The cracking response of these fractions showed increasing yields of dry gas and coke, with decreasing gasoline yields, as a function of increasing apparent boiling point as would normally be expected. Surprisingly, however, local maxima were observed for wet gas yield and total conversion, with local minima for cycle oil and slurry yields, in the region of the 1200–1263°F (650–680°C) middle fraction. All fractions showed significant response to cracking, with coke yields generally being the only negative factor observed.     

Impact of compression,physical aging,and freezing rate on the crystallization characteristics of an amorphous sugar matrix

Amorphous matrices made up of sugar molecules, are frequently used in food and pharmaceutical industries. A drawback to their use is that they are susceptible to collapse, as a result of water uptake and an increase in temperature and subsequently crystallize. Herein, the crystallization characteristics of amorphous sugar (sucrose and α-lactose) preparations were analyzed, with the purpose of obtaining knowledge that could lead to the prediction of how long the amorphous state is retained under various conditions. The impact of compression, physical aging and freezing rate on the induction period (t_ind) for crystallization were examined. Freeze-dried sugar samples were compressed at 74 or 443 MPa (5 min) and then rehumidified at specified RHs. Some freeze-dried sucrose samples were physically aged, and alternatively freeze-drying was conducted under different conditions. The isothermal crystallization of the prepared samples at different temperatures (T), the glass transition and the crystallization temperature (T_cry) were measured, using differential scanning calorimetry. The compression markedly decreased the t_ind, while significantly lowered the hygroscopicity. Physical aging and slower-freezing also shortened the t_ind. The t_ind was found to be correlated exclusively with (T_cry–T), regardless of rehumidification, compression, sugar type, physical aging and freezing rate in the freeze-drying process.     

The Latina Breast Cancer Control Study, year one: factors predicting screening mammography utilization by urban Latina women in Massachusetts

The mechanisms underlying secondary or delayed cell death following traumatic brain injury (TBI) are poorly understood. Recent evidence from experimental models of TBI suggest that diffuse and widespread neuronal damage and loss is progressive and prolonged for months to years after the initial insult in selectively vulnerable regions of the cortex, hippocampus, thalamus, striatum, and subcortical nuclei. The development of new neuropathological and molecular techniques has generated new insights into the cellular and molecular sequelae of brain trauma. This paper will review the literature suggesting that alterations in intracellular calcium with resulting changes in gene expression, activation of reactive oxygen species (ROS), activation of intracellular proteases (calpains), expression of neurotrophic factors, and activation of cell death genes (apoptosis) may play a role in mediating delayed cell death after trauma. Recent data suggesting that TBI should be considered as both an inflammatory and/or a neurodegenerative disease is also presented. Further research concerning the complex molecular and neuropathological cascades following brain trauma should be conducted, as novel therapeutic strategies continue to be developed.     

Some physical organic chemistry of aging processes

Work at Stanford Research Institute on the deterioration of polymers is based on the assumption that aging in the light is the most serious problem and that it has at least three components that must be separated if we are to understand the overall process. We have started by measuring the production of free radicals on the polymer when pairs of t-butoxy radicals are generated from thermal decomposition of di-t-butylperoxy oxalate (DBPO) in bulk atactic polypropylene at temperatures approximating service conditions, 35–50°C. Our preliminary experiments have brought out experimental difficulties and have raised more theoretical questions than they have answered. Nevertheless, they show that the efficiency of production of polymer radicals is low and sensitive to the mobilities of the polymer chains. They also suggest that two kinetically different oxidation processes, with different dependencies on rates of initiation and with different susceptibilities to inhibitors, are proceeding simultaneously. The implications of these findings for results of some previous work and for design of improved accelerated tests is considered.     

Brownian motion and the superconducting surface sheath

19780123 We give an explicit solution for the mean velocity of a Brownian particle that is subject simultaneously to a spatially sinusoidal and a constant force. An application is made to the superconducting surface sheath of lead, wherein the fluxoids are represented by Brownian particles. When Brownian mean velocity curves are fitted to experimental voltage-current curves, we find that the parameter values are physically reasonable provided that interactions among the fluxoids are taken into account. The fluxoids move, in effect, as collections of about 100 fluxoids.     

Observations of Twelve USEPA Priority Polycyclic Aromatic Hydrocarbons in the Aitken Size Range (10–32 nm D p )

Particle size distribution measurements of twelve USEPA priority pollutant polycyclic aromatic hydrocarbons (PAHs)—collected in Riverside, California, down to 10 nm aerodynamic diameter (D_p)—observed on integrated nocturnal samples (7:00 p.m.-6:30 a.m.) revealed that between 46 and 100% of the mass of particles in the Aitken size range was found in the 10–18 nm size bin. Particles in this size range have high alveolar deposition efficiency.