A touch of the future: contact-expressive devices

Contact-expressive devices could improve our lives-from practical improvements that let us interact with devices when other modalities are impossible, inappropriate, or inadequate to devices that have important consequences for physical well-being. We can also imagine using contact expressions in devices that are pleasurable, playful, artistic, or otherwise important to a human's experience. This paper discusses the technical development of sensor-motor systems, tactile interfaces, and technologies that can embody and understand affect. Contact-expressive devices are technologies that understand and use touch in meaningful ways-that can distinguish between a press and a caress. Also discussed are the following issues: technical requirements and the nature of contact expressions. Although a fairly large body of research exists regarding nonverbal communication, the majority of this work is on visual expression (facial expressions, physical appearance, direction of gaze, physical posture, and other visible forms of body language) and paralinguistics (such as vocal inflection, pitch, volume, and speech rate). Work needs to begin on studies of human contact with the goal of leveraging those insights for the design of contact-expressive devices-and work needs to begin on the implementation of technologies that have rich contact-expressive range and appeal.     

Breaking the Nyquist barrier

The author discusses the concept that data sampled beyond the Nyquist frequency is meaningless. A simple signal processing scheme to extend resolution to nearly twice the Nyquist without the problem of alias emerged. It starts by placing one-dimensional signals into a simulated sample-and-hold process in a Mathcad application     

Effects of viscosity on the bitterness and astringency of grape seed tannin

To examine the separate effects of viscosity and sweetness on astringency, aqueous solutions of grape seed tannin (GST) were thickened with carboxymethyl cellulose (CMC) from 2 to 45 cP (experiment 1) or sweetened with 0 to 1.8 g/L aspartame (experiment 2). Trained subjects continuously rated astringency and bitterness in duplicate. Subjects were categorized by the salivary flow induced by citric acid and ability to taste n-propyl thiouracil (PROP). In experiment 1, maximum intensity and total duration of astringency were significantly decreased as viscosity rose, although time to maximum intensity of astringency was not affected. Maximum intensity and total duration of bitterness were not significantly affected by increasing viscosity; however, the onset of bitterness was significantly delayed. In experiment 2, increasing sweetness had no affect on any astringency parameter, although maximum intensity of bitterness was significantly decreased. Neither PROP nor salivary flow-status had any effect on perception of bitterness or astringency in either experiment.     

Control-canonical-form method applied to generating systems to improve dynamic stability characteristics

Contents The control-canonical-form (CCF) method is introduced for the purpose of applying it to high-order state-space single-input single or multiple-output (SISO or SIMO) and multiple-input multiple-output (MIMO) linear time-invariant system models to determine closed-loop systems (i.e. design robust controllers) from which enchanced dynamic stability characteristics and overall performance of these systems is achieved. The method has been applied successfully to a SISO 6th-order linearized state-space open-loop model (representing a simplified hydro power system), and to a MIMO 8th-order linearized state-space open-loop model (representing an 87.5 kVA synchronous machine with conventional exciter supplying power to an electric utility system through an interconnection network)

---

Anwendung der kanonischen Form der Zustandsrückführung auf Erzeugersysteme zur Verbesserung der dynamischen Stabilitätseigenschaften

Übersicht Die Methode der kanonischen Form wird auf lineare zeitinvariante Systeme höherer Ordnung im Zustandsraum angewendet, die eine oder mehrere Eingangsgrößen bei einer oder mehreren Ausgangsgrößen aufweisen. Damit werden robuste Regler entworfen, welche die dynamische Stabilität und das gesamte Betriebsverhalten verbessern. Die Methode wurde erfolgreich auf ein linearisiertes Modell sechster Ordnung mit einem Eingang und einem Ausgang angewendet, das vereinfachend eine Wasserkraftanlage darstellt; außerdem auf ein linearisiertes Zustandsmodell achter Ordnung einer Synchronmaschine 87,5kVA mit konventioneller Erregung, die über ein Verbindungsnetzwerk in das öffentliche Netz einspeist.

     

Alignment of fluorescent molecules vapour-deposited on to highly oriented PTFE substrates

The alignment of six fluorescent materials (p-terphenyl, p-quaterphenyl, p-quinquephenyl, diphenylstilbene, 1,4-bis(2-methylstyryl)benzene, and 1,4-bis-2-(5-phenyloxazolyl)benzene) grown from the vapour phase on to friction-deposited, highly oriented poly(tetrafluoroethylene) (PTFE) films was studied. The dichroic ratio of the fluorescent films produced was determined by polarized spectroscopic fluorescence measurements, and the crystallographic orientation of these materials was determined by transmission electron microscopy. The measured dichroic ratios ranged from 1.7 for diphenylstilbene to 5.0 for the p-quaterphenyl film. Electron diffraction patterns revealed that five of the fluorescent materials grew epitaxially on the single crystal-like PTFE films, the fluorescent crystals adopting particular orientations with respect to the crystallographic planes of PTFE. On the other hand, crystals of 1,4-bis-2-(5-phenyloxazolyl) benzene aligned in a fibre pattern, apparently by a grapho-epitaxial mechanism.     

Applications of ultrashort pulse propagation in Bragg gratings forwavelength-division multiplexing and code-division multiple access

We discuss theoretical and experimental studies on the propagation of ultrashort pulses through fiber Bragg gratings. We also consider several applications in optical communications to be found by combining ultrashort pulses and fiber Bragg gratings: a multiwavelength source for wavelength-division-multiplexed systems and a means for implementing optical code-division multiple access     

Optical characterization of low-temperature-grown GaAs forultrafast all-optical switching devices

Low-temperature-grown GaAs (LT-GaAs) is a promising material for all-optical switching devices due to its outstanding optical characteristics. In this paper, we outline a simplified model we have developed to describe the dynamics of the carriers in this material. We also report the results of a series of measurements that we have performed to characterize the optical properties of the material. Specifically, we present the first measurements of the two-photon absorption coefficient and the refractive index changes as a function of the growth and annealing temperatures in LT-GaAs. Finally, we show how our model can be used to optimize the material for applications in all-optical switching     

Investigation of solar selective and microstructural properties of molybdenum black immersion coatings on cobalt substrates

Molybdenum black solar selective coatings have been produced on cobalt by immersion in a solution of ammonium paramolybdate and nickel sulphate. The cobalt was electroplated on nickel-plated copper prior to immersion in the paramolybdate solution. The maximum solar absorptance of the resulting molybdenum black coating was about 0.91. The minimum emittance was about 0.1 for coatings on cobalt deposited with an addition agent and about 0.23 for coatings on cobalt deposited without addition agent in the 60 °C plating solution. These differences have been related to the coating morphology determined by scanning electron microscopy. The emittance of coatings on cobalt deposited without addition agent decreases (or remains unchanged) during short-term heat treatment while that of coatings deposited on cobalt plated with addition agent increases somewhat. Reduction of the cobalt plating bath temperature to 45 °C can also lead to good initial coating properties but without the requirement for an addition agent in the cobalt plating bath. XPS studies show that the oxidation state of molybdenum in the coatings is approximately + 5 corresponding to Mo₄O₁₁. This reduces to + 4 after argon ion bombardment. Some cobalt may be present in the coatings in the form of CoO.