Inorganic-Based Printed Thermoelectric Materials and Devices

One of the simplest ways to generate electric power from waste heat is thermoelectric (TE) energy conversion. So far, most of the research on thermoelectrics has focused on inorganic bulk TE materials and their device applications. However, high production costs per power output and limited shape conformity hinder applications of state-of-the-art thermoelectric devices (TEDs). In recent years, printed thermoelectrics has emerged as an exciting pathway for their potential in the production of low-cost shape-conformable TEDs. Although several inorganic bulk TE materials with high performance are successfully developed, achieving high performance in inorganic-based printed TE materials is still a challenge. Nevertheless, significant progress has been made in printed thermoelectrics in recent years. In this review article, it is started with an introduction signifying the importance of printed thermoelectrics followed by a discussion of theoretical concepts of thermoelectricity, from fundamental transport phenomena to device efficiency. Afterward, the general process of inorganic TE ink formulation is summarized, and the current development of the inorganic and hybrid inks with the mention of their TE properties and their influencing factors is elaborated. In the end, TEDs with different architecture and geometries are highlighted by documenting their performance and fabrication techniques.     

Infrared Spectroscopy-Based Chemometric Analysis for Lard Differentiation in Meat Samples

One of the most pressing concerns for the consumer market is the detection of adulteration in meat products due to their preciousness. The rapid and accurate identification mechanism for lard adulteration in meat products is highly necessary, for developing a mechanism trusted by consumers and that can be used to make a definitive diagnosis. Fourier Transform Infrared Spectroscopy (FTIR) is used in this work to identify lard adulteration in cow, lamb, and chicken samples. A simplified extraction method was implied to obtain the lipids from pure and adulterated meat. Adulterated samples were obtained by mixing lard with chicken, lamb, and beef with different concentrations (10%–50% v/v). Principal component analysis (PCA) and partial least square (PLS) were used to develop a calibration model at 800–3500 cm⁻¹. Three-dimension PCA was successfully used by dividing the spectrum in three regions to classify lard meat adulteration in chicken, lamb, and beef samples. The corresponding FTIR peaks for the lard have been observed at 1159.6, 1743.4, 2853.1, and 2922.5 cm⁻¹, which differentiate chicken, lamb, and beef samples. The wavenumbers offer the highest determination coefficient R² value of 0.846 and lowest root mean square error of calibration (RMSEC) and root mean square error prediction (RMSEP) with an accuracy of 84.6%. Even the tiniest fat adulteration up to 10% can be reliably discovered using this methodology.     

Royal Crown Shaped Polarization Insensitive Perfect Metamaterial Absorber for C-, X-, and Ku-Band Applications

This study proposed a new royal crown-shaped polarisation insensitive double negative triple band microwave range electromagnetic metamaterial absorber (MA). The primary purpose of this study is to utilise the exotic characteristics of this perfect metamaterial absorber (PMA) for microwave wireless communications. The fundamental unit cell of the proposed MA consists of two pentagonal-shaped resonators and two inverse C-shaped metallic components surrounded by a split ring resonator (SRR). The bottom thin copper deposit and upper metallic resonator surface are disjoined by an FR-4 dielectric substrate with 1.6 mm thickness. The CST MW studio, a high-frequency electromagnetic simulator has been deployed for numerical simulation of the unit cell in the frequency range of 4 to 14 GHz. In the TE mode, the offered MA structure demonstrated three different absorption peaks at 6.85 GHz (C-band), 8.87 GHz (X-band), and 12.03 GHz (Ku-band), with 96.82%, 99.24%, and 99.43% absorptivity, respectively. The electric field, magnetic field, and surface current distribution were analysed using Maxwell’s-Curl equations, whereas the angle sensitivity was investigated to comprehend the absorption mechanism of the proposed absorber. The numerical results were verified using the Ansys HFSS (high-frequency structure simulator) and ADS (advanced design system) for equivalent circuit models. Moreover, the proposed MA is polarisation and incident angle independent. Hence, the application of this MA can be extended to a great extent, including airborne radar applications, defence, and stealth-coating technology.     

Harmonic modification and data adaptive filtering based approach to robust pitch estimation

A novel and robust pitch estimation method is presented in this paper. The basic idea is to reshape the speech signal using a combination of the dominant harmonic modification (DHM) and data adaptive time domain filtering techniques. The noisy speech signal is filtered within the ranges of fundamental frequencies to obtain the pre-filtered signal (PFS). The dominant harmonic (DH) of the PFS is determined and enhanced its amplitude. Normalized autocorrelation function (NACF) is applied to that modified signal. Then empirical mode decomposition (EMD) based data adaptive time domain filtering is applied to the NACF signal. Partial reconstruction is performed in EMD domain. The pitch period is determined from the partially reconstructed signal. The experimental results show that the proposed method performs better than the other recently developed methods for noisy and clean speech signals in terms of gross and fine pitch errors.     

A conditional purpose-based access control model with dynamic roles

This paper presents a model for privacy preserving access control which is based on variety of purposes. Conditional purpose is applied along with allowed purpose and prohibited purpose in the model. It allows users using some data for certain purpose with conditions. The structure of conditional purpose-based access control model is defined and investigated through dynamic roles. Access purpose is verified in a dynamic behavior, based on subject attributes, context attributes and authorization policies. Intended purposes are dynamically associated with the requested data object during the access decision. An algorithm is developed to achieve the compliance computation between access purposes and intended purposes and is illustrated with Role-based access control (RBAC) in a dynamic manner to support conditional purpose-based access control. According to this model, more information from data providers can be extracted while at the same time assuring privacy that maximizes the usability of consumers’ data. It extends traditional access control models to a further coverage of privacy preserving in data mining atmosphere. The structure helps enterprises to circulate clear privacy promise, to collect and manage user preferences and consent.     

Numerical method using cubic B-spline for the heat and wave equation

In the present paper, the cubic B-splines method is considered for solving one-dimensional heat and wave equations. A typical finite difference approach had been used to discretize the time derivative while the cubic B-spline is applied as an interpolation function in the space dimension. The accuracy of the method for both equations is discussed. The efficiency of the method is illustrated by some test problems. The numerical results are found to be in good agreement with the exact solution.     

A multi-agent system model of a diesel engine using rule induction

The proliferation of a multi-agent system (MAS) and ideas from Artificial Intelligence (AI)/distributed AI have changed the way systems, in general are controlled, and operation of a system (diesel engine) in particular is automated. In this paper a distributed multi-agent architecture for a diesel engine and the knowledge sources that handle electricity generation is developed. Electronic devices and components used for data handling are described. The sensed data are presented in fuzzy logic and calculated in entropy values and depicted in a decision hierarchy. A comparative performance assessment of the proposed multi-agent based system with an existing system is presented and discussed.     

Structural,optical and electrical properties of Cu<Subscript>2</Subscript>Zn<Subscript>1−x</Subscript>Cd<Subscript>x</Subscript>SnS<Subscript>4</Subscript> quinternary alloys nanostructures deposited on porous silicon

The Cu₂Zn_1?xCd_xSnS₄ quinternary alloy nanostructures with different Cd contents were grown using spin coating technique on porous silicon (63.93 %) substrate. The structural properties of Cu₂Zn_1?xCd_xSnS₄/PS were investigated by X-ray diffraction and field emission-scanning electron microscope (FE-SEM). The optical properties studied through photoluminescence technique, indicated that the band gap is shifted as Cd content increases from 1.84 eV at x = 0 to 1.76 eV at x = 1. The electrical characterization of the Ag/n-PS/Cu₂Zn_1?xCd_xSnS₄/Ag diode through current to voltage (I–V) characterization shows the highest photo-response of (value if any) at Cu₂Zn_0.4Cd_0.6SnS₄ composition.     

A survey of aesthetics-driven image recomposition

The advancement of digital photography and the popularity of photo sharing social media such as Instagram and Facebook have undoubtedly stimulated growing interest in aesthetics quality improvement. One aspect of photography that contributes to high quality photos is image composition; the spatial arrangement of photo subjects in the image frame. Professional photographers often apply a wealth of photographic composition rules, e.g., rule of thirds, visual balance and simplicity to capture compelling photos. In the recent years, aesthetics-driven recomposition that attempts to computationally modify the composition of an image to mimic a professional photo has started to receive considerable research interest. Researchers have proposed numerous recomposition techniques that utilize a single or a combination of multiple image operators, i.e., cropping, warping and patch rearrangement operators, to modify the composition of an image. In this paper, we present a survey on the state-of-the-arts aesthetic-driven image recomposition. We define the image recomposition problem, outline its objectives, and provide a comprehensive review of the existing image recompositoin techniques, together with a detailed analysis of the effectiveness of each technique in achieving the recomposition objectives. This survey is intended as a good reference for researchers interested in image recomposition.