A Rapid Determination of Ergosterol in Grains Using Gas Chromatography–Mass Spectrometry Method Without Derivatization

Food Analytical Methods - A simple, rapid and sensitive GC-MS method using on-column injection was developed and validated to determine ergosterol (ERG) levels in maize and wheat. In this method,...     

A simple approach to solving the kinematics of the 4-UPS/PS (3R1T) parallel manipulator

Journal of Mechanical Science and Technology - This work reports on the position, velocity and acceleration analyses of a four-degrees-of-freedom parallel manipulator, 4-DoF-PM for brevity, which...     

Throughput analysis of a CSMA based WLAN with successive interference cancellation under Rayleigh fading and shadowing

In this paper, we consider a carrier sense multiple access based wireless local area network (WLAN) with a successive interference cancellation (SIC) technique. We develop an analytical model to compute the average throughput of a user in a WLAN with the SIC technique in presence of path loss, Rayleigh fading and log-normal shadowing. We then validate the model via simulation. By means of the developed analytical model, we compute the average throughput of a user in WLAN systems without and with the SIC technique and evaluate the throughput gain provided by the SIC technique. We find that the throughput gain provided by the SIC technique is significant. However, the throughput gain varies significantly depending on the parameters of network and wireless channel. We find that the throughput gain provided by the SIC technique increases with increasing the number of users in WLAN, medium access rate of the users and the variance in shadowing and it decreases with increasing the data transmission rate. We also investigate the effect of the decoding capability of the SIC technique on the throughput performance. We find that throughputs obtained with decoding capability of 2 and 3 packets are very close.     

Preparation and characterizations of activated carbon from kenaf fiber for equilibrium adsorption studies of copper from wastewater

The potential of activated carbon prepared from kenaf fiber (KF) to remove copper (II) from aqueous effluents was investigated. The fibers were first semi-carbonized, then impregnated with potassium hydroxide (KOH) and finally activated by using carbon dioxide (CO₂) gas to produce activated carbon. Pore structure and physical characteristics of the prepared kenaf fiber activated carbon (KFAC) were determined. Adsorption studies for divalent copper (Cu) ions were carried out to delineate the effect of contact time, temperature, pH and initial metal ion concentration on equilibrium adsorption capacity. The experimental data followed pseudo-second-order kinetics and Elovich Model than pseudo-first-order. Langmuir, Freundlich and Temkin models were implemented to analyze the parameters for adsorption at 30 °C, 50 °C and 70 °C. Thermodynamic parameters such as ??G ^o , ??H ^o and ??S ^o which represent Gibbs free energy, enthalpy and entropy, respectively, were evaluated. It was concluded that activated carbon from kenaf fiber (KFAC) can be used as an efficient adsorbent for removal of Cu (II) from synthetic wastewater.     

Numerical investigation on the electronic components' cooling for different coolants by finite element method

In this study, we conducted a numerical simulation to examine the cooling performance of an aluminum finned heat sink attached to a silicon chip, placed in a chamber of a rectangular cross-section. The heat sink is cooled by convective heat transfer utilizing nine commercially available gaseous coolants, namely air, hydrogen, helium, nitrogen, oxygen, carbon dioxide, freon12 vapor, propane, and ammonia. To select an appropriate coolant for electronic devices in terms of thermal–hydraulic performance, the maximum temperature on the chip domain and the associated pressure drop in the cooling channel as a function of coolant velocity are analyzed for the aforementioned fluids. It has been found that the minimum temperature is recorded for propane and freon12 vapor, which is approximately 31.1°C, for a coolant velocity of 0.5 m/s, but freon12 vapor shows the highest pressure drop, approximately 900 mPa, among all coolants. In the overall velocity regime, hydrogen shows the best cooling performance in terms of both cooling capacity and hydrodynamic characteristics. But considering safety issues, helium can be a better alternative. This comprehensive study provides a better understanding of different coolant performances, which will aid engineers to develop an effective cooling technique to accommodate the inexorably rising power demand.     

Inhalation risk of indoor aerosol spray products commercially available in Bangladesh

Today, urbanised people spend most of their time in indoor environments, and the risk of exposure to toxic materials in an indoor environment is of great concern. This paper considers sources for the inhalation risk of aerosol sprays by measuring the particle size distributions of some of the most popular products that are commercially available in Bangladesh, and examines the degree of toxicity and the health risk via the respirability of the products. Results show that thoracic and respirable fractions of the suspended particulate matter are present in the tested samples and hence the spray products may pose a significant health risk.