High-power 1320-nm wafer-bonded VCSELs with tunnel junctions

A new long-wavelength vertical-cavity surface-emitting laser structure is described that utilizes AlGaAs-GaAs mirrors bonded to AlInGaAs-InP quantum wells with an intracavity buried tunnel junction. This structure offers complete wavelength flexibility in the 1250-1650 nm fiber communication bands and reduces the high free-carrier losses and bonded junction voltage drops in previous devices. The intracavity contacts electrically bypass the bonded junctions to reduce threshold voltage. N-type current spreading layers and undoped AlGaAs mirrors minimize optical losses. This has enabled 134/spl deg/C maximum continuous-wave lasing temperature, 2-mW room-temperature continuous-wave single-mode power, and 1-mW single-mode power at 80/spl deg/C, in various devices in the 1310-1340 nm wavelength range.     

Experimental investigations on solar chimney for room ventilation

Experimental investigations on a small size solar chimney show that the rate of ventilation increases with increase of the ratio between height of absorber and gap between glass and absorber. This finding is in agreement with results of the steady-state mathematical model developed for analysis of such systems. Nine different combination of absorber height and air gap have been investigated on the experimental set-up. Highest rate of ventilation induced with the help of solar energy was found to be 5.6 air change per hour in a room of 27 m³, at solar radiation 700 W/m² on vertical surface with the stack height-air gap ratio of 2.83 for a 1 m high chimney.     

Interference Mitigation Based on Radio Aware Channel Assignment for Wireless Mesh Networks

An intricate network deployment for high demand users leads to simultaneous transmission in wireless mesh networks. Multiple radios are adapted to individual nodes for improving network performance and Quality of Service (QoS). However, whenever multiple radios are assigned to the same channel, co-located radio interference occurs, which poses a major drawback. This paper proposes a Radio aware Channel Assignment (Ra-CA) mechanism based on a direct graphical model for mitigation of interference in multi-radio multi-channel networks. Initially, the co-located radio interference is identified by classifying non-interfering links for simultaneous transmission in the network. Proposed channel assignment mechanism helps in allocating the minimal number of channels to the network that mitigate co-located radio interference. Performance analysis of the proposed Ra-CA strategy is carried out compared with other existing techniques, like Breadth First Search-Channel Assignment (BFS-CA) and Maximal Independent Set Channel Assignment (MaIS-CA), in multi-radio networks. Simulation results demonstrate that the proposed channel assignment scheme is more efficient compared to the existing ones, in terms of QoS parameters like, packet drop rate, packet delivery ratio, transmission delay and throughput.     

A Lightweight Cryptography Technique with Random Pattern Generation

Wireless Personal Communications - The lightweight cryptography (LWC) is an interesting research area in the field of information security. So, different lightweight mechanisms have been developed...     

Hierarchical NiMoS and NiFeS Nanosheets with Ultrahigh Energy Density for Flexible All Solid‐State Supercapacitors

Highly flexible supercapacitors (SCs) have great potential in modern electronics such as wearable and portable devices. However, ultralow specific capacity and low operating potential window limit their practical applications. Herein, a new strategy for the fabrication of free‐standing Ni?Mo?S and Ni?Fe?S nanosheets (NSs) for high‐performance flexible asymmetric SC (ASC) through hydrothermal and subsequent sulfurization technique is reported. The effect of Ni²⁺ is optimized to attain hierarchical Ni?Mo?S and Ni?Fe?S NS architectures with high electrical conductivity, large surface area, and exclusive porous networks. Electrochemical properties of Ni?Mo?S and Ni?Fe?S NS electrodes exhibit that both have ultrahigh specific capacities (≈312 and 246 mAh g^?1 at 1 mA cm^?2), exceptional rate capabilities (78.85% and 78.46% capacity retention even at 50 mA cm^?2, respectively), and superior cycling stabilities. Most importantly, a flexible Ni?Mo?S NS//Ni?Fe?S NS ASC delivers a high volumetric capacity of ≈1.9 mAh cm^?3, excellent energy density of ≈82.13 Wh kg^?1 at 0.561 kW kg^?1, exceptional power density (≈13.103 kW kg^?1 at 61.51 Wh kg^?1) and an outstanding cycling stability, retaining ≈95.86% of initial capacity after 10 000 cycles. This study emphasizes the potential importance of compositional tunability of the NS architecture as a novel strategy for enhancing the charge storage properties of active electrodes.     

Development of dimethylsiloxane based tetraglycidyl epoxy nanocomposites for high performance,aerospace and advanced engineering applications

A study was made in the present investigation on bis(p-aminophenoxy) dimethylsiloxane based tetraglycidyl epoxy nanocomposites in order to determine its suitability for use in high performance applications. The synthesis of the siloxane tetraglycidyl epoxy resin denoted as ‘F’ was done and it was characterized by Fourier transform infrared spectra (FT-IR) and ¹H, ¹³C nuclear magnetic resonance (NMR) spectra. Nanoclay and polyhedral oligomeric silsesquioxanes (POSS)-amine nanoreinforcements denoted as N1 and N2 were incorporated into the synthesized epoxy resin. Curing was done with diaminodiphenylmethane (DDM) and bis(3-aminophenyl) phenylphosphine oxide (BAPPO) curing agents denoted as X and Y respectively. The mechanical, thermal, flame retardant and water absorption behavior of the epoxy nanocomposites were studied and the results are discussed.     

Processing effects in production of composite prepreg by hot melt impregnation

The hot melt impregnation process for producing composite prepreg has been studied. The role of the exit die is highlighted by operating without impregnation bars. Experimental results show that when a fiber two is pulled through a resin bath and then through a wedge shaped die, the total resin mass fraction and the extent of resin impregnation in the two increase with the processing viscosity. The penetration of resin into a fiber bundle is greater when the resin viscosity is higher. This trend is unchanged over a range of two speeds up to the breaking point. A theoretical model is developed to describe the effect of processing conditions and die geometry on the degree of impregnation. Calculations with this model indicate that for a given die geometry, the degree of impregnation increases from 58% to 90% as the ratio of the clearance between the two and the die wall, to the total die gap is decreased from 0.15 to 0.05. Physical arguments elated to the effective viscosity of the prepreg show that the clearance ratio is independent of the two speed, but decreases as the ratio of the effective shear viscosity of the prepareg to the resin viscosity increases. This provides a connection between the experimental results obtained with varying resin viscosity and the computational results obtained with varying clearance values at the die inlet.     

Novel Role of Ghrelin Receptor in Gut Dysbiosis and Experimental Colitis in Aging

Chronic low-grade inflammation is a hallmark of aging, which is now coined as inflamm-aging. Inflamm-aging contributes to many age-associated diseases such as obesity, type 2 diabetes, cardiovascular disease, and inflammatory bowel disease (IBD). We have shown that gut hormone ghrelin, via its receptor growth hormone secretagogue receptor (GHS-R), regulates energy metabolism and inflammation in aging. Emerging evidence suggests that gut microbiome has a critical role in intestinal immunity of the host. To determine whether microbiome is an integral driving force of GHS-R mediated immune-metabolic homeostasis in aging, we assessed the gut microbiome profiles of young and old GHS-R global knockout (KO) mice. While young GHS-R KO mice showed marginal changes in Bacteroidetes and Firmicutes, aged GHS-R KO mice exhibited reduced Bacteroidetes and increased Firmicutes, featuring a disease-susceptible microbiome profile. To further study the role of GHS-R in intestinal inflammation in aging, we induced acute colitis in young and aged GHS-R KO mice using dextran sulfate sodium (DSS). The GHS-R KO mice showed more severe disease activity scores, higher proinflammatory cytokine expression, and decreased expression of tight junction markers. These results suggest that GHS-R plays an important role in microbiome homeostasis and gut inflammation during aging; GHS-R suppression exacerbates intestinal inflammation in aging and increases vulnerability to colitis. Collectively, our finding reveals for the first time that GHS-R is an important regulator of intestinal health in aging; targeting GHS-R may present a novel therapeutic strategy for prevention/treatment of aging leaky gut and inflammatory bowel disease.     

Differential scanning calorimetry and wide-angle X-ray scattering studies of bread staling

Wide angle X-ray scattering (WAXS) was used to follow the development of crystal size and strain during the staling of bread containing different additives. In this it was observed that one can classify the good anti-staling additives as gelatin, propylene glycol, maltodextrin and anti-staling enzyme corresponding to the order of increasing crystal size for a particular Bragg reflection in all the samples and correlate using DSC (differential scanning calorimetry) studies of all the bread compositions containing different additives. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67:1597–1603, 1998     

Microstructure of vinylidene chloride-ethyl acrylate copolymers by one- and two-dimensional NMR spectroscopy

Vinylidene chloride/ethyl acrylate (V/E) copolymers were prepared by photopolymerization using uranyl ion as a photosensitizer at room temperature. Copolymers were characterized by chlorine estimation, gel permeation chromatography, ¹H- and ¹³C-NMR, 2D heteronuclear single quantum correlation (HSQC), and homonuclear 1H–2D double quantum filter correlation spectroscopy (DQF-COSY). Reactivity ratios for the copolymerization of V with E were calculated using the Kelen-Tudos (KT) and the nonlinear error in variables (EVM) methods. The reactivity ratios obtained from the EVM methods are r_V = 0.80 ± 0.15 and r_E = 0.87 ± 0.04. The microstructure was calculated in terms of the distribution of V- and E-centered triad sequences from ¹³C{¹H}-NMR spectra of the copolymers. 2D HSQC was used to analyze the complex ¹H-NMR spectrum and 2D COSY shows the various bond interactions, thus inferring the possible structure of the copolymers. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 67: 417–426, 1998