Features of Rotating Stall Cell in a Diagonal Flow Fan（in Case of Mid-loading Rotor）

The structure and behavior of rotating stall cell were experimentally clarified in a diagonal flow fan. The specific-speed of the fan was 1140 (r/min, m3/min, m), and the total pressure-rise coefficient at design flow-rate was 0.345. The static pressure on outer casing wall and the total pressure at rotor inlet and outlet were measured using a high response pressure transducer. The measured data were processed by the use of DPLA technique, and the structure and behavior of rotating stall cell were obtained. As a result, the stall cell extent for circumferential and spanwise direction and the pressure distributions inside stall cell were clarified. The details of stall cell propagation were also shown.     

Radiation distribution sensing with normal optical fiber

The purpose of this study is to develop a radiation distribution monitor using a normal plastic optical fiber. The monitor has a long operating length and can obtain continuous radiation distributions. A principle of the position sensing is based on a time-of-flight technique. The monitor is sensitive to beta rays or charged particles, gamma rays, and fast neutrons. The spatial resolutions for beta-rays ( ⁹⁰Sr-⁹⁰Y), gamma-rays (¹³⁷Cs), and D-T neutrons are 30, 37, and 13 cm, respectively. The detection efficiencies for the beta-rays, gamma-rays, and D-T neutrons are 0.11%, 1.6×10 ^-5% and 1.2×10^-4%, respectively. The effective attenuation length of the detection efficiency is 18 m. In this paper, we describe the basic characteristics of this monitor     

An optimum design of robotic food handling by using Burger model

This paper discusses an optimum design approach on robotic food handling by considering the characteristics of viscoelasticity of object. We pick up a traditional Japanese food, “Norimaki” as a typical example with the viscoelastic characteristics. We first show that the dynamic characteristics of Norimaki can be expressed by utilizing the Burger model. After testing the parameter sensitivity, we show an example of the optimum design for determining the combination of the hand stiffness and the operating velocity. We further show that the resultant plastic deformation can be formulated with the exact solution.     

Radiation tolerance of type IIa synthetic diamond detector for 14 MeV neutrons

Radiation tolerance of a type IIa synthetic diamond detector was examined from irradiation of mono-energetic 14 MeV neutrons. Measurements of I–V (current–voltage) characteristics and energy spectrum for 5.486 MeV alpha particles were performed after neutron irradiation. In the I–V characteristics measurement, enhancement of rectification was observed after neutron irradiation of up to 2.0 × 10¹² n/cm². Concurrently with the enhancement of rectification, significant decrease in signal amplitude was observed in energy spectrum measurement for alpha particles. It is considered that these changes were due to increase in the concentration of defects acting as shallow energy levels in the forbidden band. For neutron irradiation of higher than 1.6 × 10¹³ n/cm², weakening of the rectification characteristics and recovery of the signal amplitude were observed. These changes imply that deep energy levels, which were also considered to be introduced by defects, were dominant and weakened the effects of the shallow energy levels. Increase in the concentration of the deep trapping levels resulted in gradual decrease of the signal amplitude and degradation in the energy resolution. The peak for the alpha particles was obtained up to 5.5 × 10¹³ n/cm².     

Photostability of Isovaline and its Precursor 5-Ethyl-5- methylhydantoin Exposed to Simulated Space Radiations

Aqueous solutions of isovaline and its precursor molecule, 5-ethyl-5-methylhydantoin, were irradiated with ultraviolet and γ-ray photons, to evaluate their structural stability against space radiation. The degree of photolysis was measured and irradiation products were identified using chiral, reversed-phase and ion-exchange high-performance liquid chromatography. The experimental results show that the degree of photolysis of 5-ethyl-5-methylhydantoin is more significant than that of isovaline under ultraviolet light irradiation, while the results under γ-ray irradiation are the opposite. As the products of isovaline photolysis, aspartic acid, serine, glutamic acid and alanine were dominantly detected.     

Evolution of the mitochondrial ATPase 6 gene in Drosophila: unusually high level of polymorphism in D. melanogaster

We have determined 1990 bp mitochondrial DNA sequence which extends from 3' end of the cytochrome oxidase subunit I (COI) gene to 5' end of the COIII gene from two sibling species of Drosophila, D. simulans and D. mauritiana. Analyses of the sequences and part of the NADH dehydrogenase subunit 2 gene and the COI gene together with those from D. melanogaster and D. yakuba revealed that amino-acid substitution rate of the ATPase 6 gene seems to be higher in some strains of D. melanogaster than in the other species. High level of amino-acid polymorphism in this gene was observed in D. melanogaster. Synonymous substitution rate is relatively constant in all the genes examined, suggesting that mutation rate is not higher in the ATPase 6 gene of D. melanogaster. The amino-acid substitutions found specifically in D. melanogaster are at the sites which are not conserved among mammals, yeast and E. coli. These sites of the ATPase 6 gene might lose the selective constraint in D. melanogaster, and the amino-acid substitutions can be explained by neutral mutations and random genetic drift.     

Stability of the ultrafine-grained microstructure in silver processed by ECAP and HPT

The high-temperature thermal stability of the ultrafine-grained (UFG) microstructures in low stacking fault energy silver was studied by differential scanning calorimetry (DSC). The UFG microstructures were achieved by equal-channel angular pressing (ECAP) and high-pressure torsion (HPT) at room temperature (RT). The defect structure in the as-processed samples was examined by electron microscopy and X-ray line profile analysis. The stored energy calculated from the defect densities was compared to the heat released during DSC. The sum of the energies stored in grain boundaries and dislocations in the ECAP-processed samples agreed with the heat released experimentally within the experimental error. The temperature of the DSC peak maximum decreased while the released heat increased with increasing numbers of ECAP passes. The released heat for the specimen processed by one revolution of HPT was much smaller than after 4–8 passes of ECAP despite the 2 times larger dislocation density measured by X-ray line profile analysis. This dichotomy was caused by the heterogeneous sandwich-like microstructure of the HPT-processed disk: about 175 μm wide surface layers on both sides of the disk exhibited a UFG microstructure while the internal part was recrystallized, thereby yielding a relatively small released heat.     

An integrated control method for a wind farm to reduce frequency deviations in a small power system

Output power of wind turbine generator (WTG) is not constant and fluctuates due to wind speed changes. To reduce the adverse effects of the power system introducing WTGs, there are several published reports on output power control of WTGs detailing various researches based on pitch angle control, variable speed wind turbines, energy storage systems, and so on. In this context, this paper presents an integrated control method for a WF to reduce frequency deviations in a small power system. In this study, the WF achieves the frequency control with two control schemes: load estimation and short-term ahead wind speed prediction. For load estimation in the small power system, a minimal-order observer is used as disturbance observer. The estimated load is utilized to determine the output power command of the WF. To regulate the output power command of the WF according to wind speed changing, short-term ahead wind speed is predicted by using least-squares method. The predicted wind speed adjusts the output power command of the WF as a multiplying factor with fuzzy reasoning. By means of the proposed method, the WF can operate according to the wind and load conditions. In the WF system, each output power of the WTGs is controlled by regulating each pitch angle. For increasing acquisition power of the WF, a dispatch control method also is proposed. In the pitch angle control system of each WTG, generalized predictive control (GPC) is applied to enhance the control performance. Effectiveness of the proposed method is verified by the numerical simulations.     

Development of effective detection method for Coxiella burnetii in mayonnaise by real-time PCR and investigation of C. burnetii contamination in commercial mayonnaise in Tokyo

A PCR method for the effective detection of Coxiella burnetii in commercially available mayonnaise was developed. Sample preparations were isolated from 50 g portions of each mayonnaise product by four successive extraction steps in phosphate buffer with 2.0 M NaCl. These extracts were then centrifuged at 20,000 x g for 60 min. DNA was isolated from the solution containing the precipitate with a commercial kit, and amplified quantitatively using real-time PCR that targeted the com1 region of C. burnetii. The recoveries of C. burnetii from 2 kinds of commercial mayonnaise specimens, with a baseline control of 1 x 10(7) particles of the Nine Mile phase II strain, were 85.0 +/- 6.0% and 72.0 +/- 0.4%, respectively. The determination limit of this method was 500 C. burnetii particles per 50 g of mayonnaise. The DNA specimens isolated from 50 different commercial mayonnaise samples sold in Tokyo using this method were amplified using both nested PCR and real-time PCR. No contamination by C. burnetii was detected in any of the mayonnaise samples.     

Occurrence of Erysipelothrix spp. in broiler chickens at an abattoir

From September 1995 to August 1996, 750 chickens from 66 farms sent to an abattoir in Nagano Prefecture, Japan, were examined for the presence of Erysipelothrix spp. Erysipelothrix spp. were isolated from 118 (15.7%) of 750 skin samples, 27 (7.3%) of 372 hypoderm samples, 12 (1.9%) of 630 throat samples, 106 (59.2%) of 179 feather samples, and none of 257 spleen samples. Of 66 farms, 55 farms (83.3%) sent Erysipelothrix-positive chickens and 11 farms (16.7%) only negative ones. Of 297 Erysipelothrix isolates, 273 isolates were identified as Erysipelothrix rhusiopathiae and 24 as Erysipelothrix tonsillarum. E. rhusiopathiae isolates were serotyped into nine different serovars. Of the 273 E. rhusiopathiae isolates, 33 (11.1%) were serotyped to serovar 6; 22 (7.4%) were serovar 5; 19 (6.4%) were serovar 2; 15 (5.1%) were serovar 8; 2 (0.7%) were serovar 21; 4 each (1.3% each) were serovars 1b, 9, 12, and 19; and 178 (59.9%) were untypeable. Of 24 E. tonsillarum isolates, 15 (5.1%) were serotyped to serovar 3, and 9 (3.0%) were serovar 7. These findings indicate that chickens seem to be a potential reservoir of Erysipelothrix spp. in nature and to be a source of human Erysipelothrix infection.