Upper and lower critical solution temperatures in poly (ethylene glycol) solutions

Upper and lower critical solution temperatures have been determined for solutions of poly(ethylene glycol) in t-butyl acetate and water over the molecular weight range of M_η = 2.18 × 10³ to ～1020 × 10³. The phase diagram for solutions of poly(ethylene glycol) (M_η = 719 × 10³) in t-butyl acetate was expressed as the ‘hour glass’ type, while the phase diagram for solution of poly(ethylene glycol) (M_η = 2.18 × 10³ to ～2.29 × 10³) in water was expressed as the ‘closed loop’ type. The value of the pressure dependence of the lower critical solution temperature $\text{(}\text{d}\text{T}\text{d}\text{P}\text{)}{}_{\mathrm{c}}$ in the poly(ethylene glycol) (M_η = 1020 × 10³)/water system over the pressure range of 0 to ～50 atm was negligibly small and positive.     

Synthesis of functional π-conjugated polymers from aromatic acetylenes

Because of their unique structures and properties, π-conjugated polymers have attracted the attention of scientists and engineers. The authors have studied the synthesis of two kinds of π-conjugated poly(aromatic acetylene)s, i.e. poly(arylacetylene)s and poly(aryleneethynylene)s with the aim of obtaining new polymers having novel functions or higher performances. This review mainly concerns the authors' results, as follows: first, we describe the synthesis and properties of achiral poly(arylacetylene)s, containing trimethylsilyl groups, oligodimethylsiloxanyl groups, dendritic groups, and glavinoxyl groups, for application as oxygen permselective membrane materials. Their self-membrane-forming abilities and high oxygen permeabilities are presented. Second, the synthesis by asymmetric-induced polymerization of chiral poly(arylacetylene)s having both a main-chain chirality and chiral pendant groups and their application as optical resolution membranes are described. Third, two new synthetic methods for preparing chiral helical poly(phenylacetylene)s without the coexistence of any other chiral moieties are presented. One is helix-sense-selective addition polymerization and the other is in situ removal of chiral pendant groups from membranes of poly(arylacetylene)s that also contain a main-chain chirality. The chiral helical poly(arylacetylene)s were tested as optical resolution membranes. The chiral and achiral poly(arylacetylene)s were synthesized by addition polymerization using metathesis catalysts or rhodium complexes. Finally, the synthesis of regiospecific poly(aryleneethynylene)s bearing stable radicals by the polycondensation of bromoethynylanthracene derivatives using a Pd(0) complex is described. The magnetization and the static magnetic susceptibility of the polyradicals are explained.     

Back‐channel‐etched thin‐film transistor using c‐axis‐aligned crystal In–Ga–Zn oxide

Our crystalline In–Ga–Zn oxide (IGZO) thin film has a c‐axis‐aligned crystal (CAAC) structure and maintains crystallinity even on an amorphous base layer. Although the crystal has c‐axis alignment, its a‐axis and b‐axis have random arrangement; moreover, a clear grain boundary is not observed. We fabricated a back‐channel‐etched thin‐film transistor (TFT) using the CAAC‐IGZO film. Using the CAAC‐IGZO film, more stable TFT characteristics, even with a short channel length, can be obtained, and the instability of the back channel, which is one of the biggest problems of IGZO TFTs, is solved. As a result, we improved the process of manufacturing back‐channel‐etched TFTs.     

Thraustochytrid as a potential source of carotenoids

Thraustochytrids, marine protists whose dominant genera are Thraustochytrium and Schizochytrium, belong to the kingdom Chromista and are known as an industrial source of DHA. We describe here that thraustochytrid strain KH105, isolated as a DHA producer, also accumulates significant levels of β-carotene and xanthophylls including canthaxanthin and astaxanthin. A4-d cultivation using a medium composed of 10% glucose and less than 0.3% of nitrogen sources in a half-concentration of seawater gave an astaxanthin production up to 6.1 mg/L, and canthaxanthin content reached more than 10 mg/L under conditions where a higher concentration of nitrogen sources (6%) was employed. It might be advantageous in mass production systems for these carotenoids to be extracted readily by simply suspending the cells with organic solvents such as acetone and chloroform. Analyses on the morphological and life history features of the KH105 strain revealed that it belongs to the genus Schizochytrium. This particular species of thraustochytrids is thus considered to be a promising source of xanthophylls as well as DHA for use in the food industry.     

Effect of alloying elements on response of nonoriented electrical steels to stamping operations

A suitable alloying design for improving the punchability of nonoriented electrical steels containing 0.1 % Si was investigated. The appropriate addition of sulfur to steels containing relatively high manganese content is very useful in obtaining good punchability without detrimental effects on magnetic properties.     

Correction of color information of a 3D model using a range intensity image

Most active optical range sensors record, simultaneously with the range image, the amount of light reflected at each measured surface location: this information forms what is called a range intensity image, also known as a reflectance image. This paper proposes a method that uses this type of image for the correction of the color information of a textured 3D model. This color information is usually obtained from color images acquired using a digital camera. The lighting condition for the color images are usually not controlled, thus this color information may not be accurate. On the other hand, the illumination condition for the range intensity image is known since it is obtained from a controlled lighting and observation configuration, as required for the purpose of active optical range measurement. The paper describes a method for combining the two sources of information, towards the goal of compensating for a reference range intensity image is first obtained by considering factors such as sensor properties, or distance and relative surface orientation of the measured surface. The color image of the corresponding surface portion is then corrected using this reference range intensity image. A B-spline interpolation technique is applied to reduce the noise of range intensity images. Finally, a method for the estimation of the illumination color is applied to compensate for the light source color. Experiments show the effectiveness of the correction method using range intensity images.     

An optimum design of robotic food handling by using Burger model

This paper discusses an optimum design approach on robotic food handling by considering the characteristics of viscoelasticity of object. We pick up a traditional Japanese food, “Norimaki” as a typical example with the viscoelastic characteristics. We first show that the dynamic characteristics of Norimaki can be expressed by utilizing the Burger model. After testing the parameter sensitivity, we show an example of the optimum design for determining the combination of the hand stiffness and the operating velocity. We further show that the resultant plastic deformation can be formulated with the exact solution.     

TEM characterization of Ge precipitates in an Al-1.6at% Ge alloy

The growth mechanism and morphology of Ge precipitates in an Al-Ge alloy was characterized by a combination of in-situ transmission electron microscopy, high-resolution transmission electron microscopy and three-dimensional electron tomography. Anisotropic growth of rod-shaped Ge precipitates was observed by in-situ transmission electron microscopy over different time periods, and faceting of the precipitates was clearly seen using high-resolution transmission electron microscopy and three-dimensional electron tomography. This anisotropic growth of rod-shaped Ge precipitates was enhanced by vacancy concentration as proposed previously, but also by surface diffusion as observed during the in-situ experiment. Furthermore, a variety of precipitate morphologies was identified by three-dimensional electron tomography.     

Fabrication of X-rays mask with carbon membrane for diffraction gratings

We have produced diffraction gratings for obtaining high resolution X-ray phase imaging, such as X-ray Talbot interferometer. These diffraction gratings were required to have a fine, high accuracy, high aspect ratio structure. Therefore, we decided to use the X-rays lithography technique that used synchrotron radiation of the directivity for a manufacture process. The accuracy of the completed structure depends largely on the accuracy of the X-ray mask. In our group, a resin material is conventionally used for the membrane of large X-ray masks. However, X-ray masks comprising a resin membrane have the disadvantage that, after several cycles of X-ray exposure, they crease and sag due to X-ray-derived heat. As a substitute for the conventional resin membrane, we experimentally fabricated a new X-ray mask using a carbon wafer membrane. The newly fabricated X-ray mask was subjected to X-ray exposure experiment. We succeeded in making the structure body which was almost shape. And the experimental results verified that the new mask did not deteriorate even when used repeatedly, demonstrating that it was highly durable.     

Recurrent infomax generates cell assemblies, neuronal avalanches, and simple cell-like selectivity

Recently multineuronal recording has allowed us to observe patterned firings, synchronization, oscillation, and global state transitions in the recurrent networks of central nervous systems. We propose a learning algorithm based on the process of information maximization in a recurrent network, which we call recurrent infomax (RI). RI maximizes information retention and thereby minimizes information loss through time in a network. We find that feeding in external inputs consisting of information obtained from photographs of natural scenes into an RI-based model of a recurrent network results in the appearance of Gabor-like selectivity quite similar to that existing in simple cells of the primary visual cortex. We find that without external input, this network exhibits cell assembly-like and synfire chain-like spontaneous activity as well as a critical neuronal avalanche. In addition, we find that RI embeds externally input temporal firing patterns to the network so that it spontaneously reproduces these patterns after learning. RI provides a simple framework to explain a wide range of phenomena observed in in vivo and in vitro neuronal networks, and it will provide a novel understanding of experimental results for multineuronal activity and plasticity from an information-theoretic point of view.