Charged Particle Trajectory Statistics and Deposition in a Turbulent Channel Flow

The statistical properties of charged particles and their wall deposition in a turbulent channel flow in the presence of an electrostatic field is studied in this paper. For a dilute concentration, the influence of small particles on the fluid motion is neglected. The instantaneous velocity field is generated by a direct numerical simulation of the Navier-Stokes equation via a pseudospectral method. The case in which each particle carries a single unit of charge and the case in which the particles have a saturation charge distribution are analyzed. Ensembles of 8192 particle trajectories are used for evaluating various statistics. Effects of size and electric field intensity on particle trajectory statistics and wall deposition rate are studied. RMS particle velocities and particle concentrations at different distances from the wall are evaluated and discussed. The results for deposition rates are compared with those obtained from empirical equations.     

Efficient Degradation of a Biorecalcitrant Pollutant from Wastewater Using a Fluidized Catalyst-Bed Reactor

This study investigated the treatment of an azo dye, as a biorecalcitrant model, from industrial wastewater by using Cu/Mg/Al-chitosan in a fluidized catalyst-bed reactor. A number of variables were used to study the impact they had on the oxidation process involving azo dye. The maximum degradation of the azo dye was achieved at 7 g Cu/Mg/Al-chitosan. The chloride and sulfate ions had a synergistic effect on azo dye removal. The oxidation of the azo dye under the selected conditions was of pseudo-first-order. Textile wastewater could effectively be treated using a low concentration of about 7 g of Cu/Mg/Al-chitosan in a short hydraulic retention time of 10 min. The use of Cu/Mg/Al-chitosan demonstrated a promising method to eliminate the azo dye from the wastewater.     

Direct Numerical Simulation of Curly Fibers in Turbulent Channel Flow

Wall deposition of rigid-link fibrous aerosols in a turbulent channel flow is studied. The instantaneous turbulent velocity vector field is generated by the direct numerical simulation of the Navier-Stokes equation with the aid of a pseudospectral code. It is assumed that the fiber is composed of five rigidly attached ellipsoidal links. The dynamic behavior of these elongated and irregular shaped particles is markedly different from the spherical ones. The hydrodynamic forces and torques acting on the fiber are evaluated and the equations governing the translational and rotational motions of the fiber are analyzed. Euler's four parameters are used, and motions of fibrous particles in the turbulent channel flow field are studied. Ensembles of 8000 fiber trajectories are generated and are used for evaluating various statistics. Root mean-square fiber velocities and fiber concentrations at different distances from the wall are evaluated and discussed. Empirical models for the deposition rate of curly fibers are also developed. The model predictions are compared with the simulation data and good agreement is observed.     

Genetic Polymorphisms in the APOA1 Gene and their Relationship with Serum HDL Cholesterol Levels

Low high density lipoprotein cholesterol (HDL-C) is a known risk factor of coronary artery disease. Apolipoprotein A1 (APOA1) is the most abundant component of HDL-C. This study aimed at identifying sequence variations (rare and common) in the APOA1 gene and its association with serum HDL-C levels. This study was conducted from April 2012 to February 2013 on 79 Tehranians (participants of Tehran Lipid and Glucose Study) with extremely low HDL-C (within the 5th percentile) and 63 individuals with extremely high HDL-C (within the 95th percentile) levels. After DNA amplification by PCR, DNA sequencing of all three exons and 700 bps of promoter region of the APOA1 gene was performed. Sequence results were analyzed and interpreted using the appropriate software and variants were identified. After sequencing 42 common and rare variants were identified, 11 of which were known variants and the others had been unreported so far. Of the exonic variants, 11 were missense, 6 were synonymous and 1 was nonsense. There was a significant association between serum HDL-C and variant of rs2070665 as well as variants Chr.11:116707788, Chr.11:116708059, Chr.11:116708036, Chr.11:116707729, rs201148448, Chr.11:116707018, Chr.11:116707801, Chr.11:116708530, Chr.11:116708088, rs121912724 and Chr.11:116706966 (p < 0.001). Variants Chr.11:116707018, rs121912724 and 2070665 were independent predictors of the HDL-C level (p < 0.001). SNP Chr.11:116707018 was the strongest predictor of the HDL-C level (OR 7.527, p < 0.001). This study identified 42 variants in APOA1 gene, 31 of which were new variants. Three variants of rs2070665, rs121912724 and Chr.11:116707018 could predict the HDL-C level independently. Variant rs2070665 was protective against low-HDL-C levels while variants rs121912724 and Chr.11:116707018 were risk factors for that in our population.     

Characterization of Ag(I), Co(II) and Cu(II) removal process from aqueous solutions using dolomite powder

Dolomite, a natural adsorbent, was used for removal of Ag(I), Cu(II) and Co(II) from aqueous solutions. Adsorption parameters including pH, temperature and contact time have been investigated to obtain adsorption mechanism. The results of experiments showed that adsorption of the metal ions increased by increasing pH values up to 5.5. The adsorption process was initially fast. Equilibrium isotherm data were analyzed using Langmuir, Freundlich and Dubinin-Radushkevich isotherm models. Maximum adsorption capacity of Ag(I), Cu(II) and Co(II) was 1.34, 1.63 and 2.84 mg/g at 20 oC, respectively. Kinetic models including Lagergren first-order and pseudo-second-order were used to test kinetic data. The results showed that pseudo-second-order has good agreement with experimental data. Thermodynamic parameters of the process were also investigated at different temperatures. The negative values of Gibbs free energy and enthalpy changes for Ag(I), Cu(II) and Co(II) indicated the spontaneous and exothermic nature of the adsorption process.     

Fusion level optimization of rigid PVC nanocompounds by using response surface methodology

The influence of the type and content of organically modified nanoclay (NC) and the amount of calcium stearate (Ca.St) on the fusion characteristics of a poly(vinyl chloride) (PVC) nanocomposite was studied by using response surface methodology. To interpret the fusion behavior, different PVC/NC compounds were prepared in a Plasticorder with a constant rotor speed of 60 rpm while keeping the processing time and temperature constant. The results revealed that introducing NC particles into the PVC compound resulted in an increase in the maximum torque (MAT), while the minimum torque (MIT) declined. On the contrary, both the MAT and MIT values slightly increased with increasing Ca.St content. It was also found that with increasing NC content, the fusion time increased and the fusion factor decreased, whereas increasing the Ca.St lowered the fusion time. Furthermore, the difference between the MIT and MAT values demonstrated multifarious behaviors depending on the material type. Ultimately, a correlation was established between the material characteristics and the fusion factor of the PVC nanocompounds. J. VINYL ADDIT. TECHNOL., 19:168‐176, 2013. © 2013 Society of Plastics Engineers     

Influence of a Reactive Organoclay on Polymerization and Properties of Polyurethane Nanocomposites

In this study, segmented polyurethane/clay nanocomposites were prepared via in situ intercalative polymerization of polyether polyol mixed nanoclay with toluene diisocyanate, followed by chain extending with 1,4-butanediol. The reactive prepolymer tended to gel by increasing the clay content from 0.4 to 1.5 wt.%. This unusual phenomenon was found to be caused by a catalytic effect of quaternary ammonium intercalant on the organoclay. The procedure used for intercalated nanocomposites, is confirmed by wide angle X-ray diffraction studies. Thermogravimetric analysis results demonstrated a very good increase in onset degradation temperature by adding only 0.8 wt.% of organoclay.     

Photocrosslinking of styrene–isoprene–styrene; effect of benzoin and ethylene glycol dimethacrylate on physical properties

Crosslinking reaction of polymer by ultraviolet (UV) irradiation has been important in industries. In this work, photocrosslinking of styrene–isoprene–styrene (SIS) triblock copolymer in the presence of benzoin photoinitiator and a dimethacrylate monomer as crosslinking agent was investigated. Curing of samples was initiated under UV irradiation. Benzoin was used as photoinitiator because it contains chromophore group that could absorb UV irradiation. Ethylene glycol dimethacrylate (EGDMA) was used as crosslinking agent, since it has alkene functional groups that could react with the alkene group of SIS. ATR-FTIR spectra of samples show that absorption band of double bond at 1500–1600?cm^?1 decreases after UV exposure. Increasing the concentration of benzoin (0.1–1?phr) and EGDMA (1–10?phr) leads to an increase in gel content and hardness, while swelling ratio decreases. After 5?min heating at 150?°C, about 20%wt of the unirradiated compound became insoluble, because heating of compound at 150?°C causes crosslinking reaction without any irradiation.     

Solid-phase electrochemical reduction of graphene oxide films in alkaline solution

Graphene oxide (GO) film was evaporated onto graphite and used as an electrode to produce electrochemically reduced graphene oxide (ERGO) films by electrochemical reduction in 6 M KOH solution through voltammetric cycling. Fourier transformed infrared and Raman spectroscopy confirmed the presence of ERGO. Electrochemical impedance spectroscopy characterization of ERGO and GO films in ferrocyanide/ferricyanide redox couple with 0.1 M KCl supporting electrolyte gave results that are in accordance with previous reports. Based on the EIS results, ERGO shows higher capacitance and lower charge transfer resistance compared to GO.     

Ameliorating Effects of Exogenously Applied Proline on Seed Composition,Seed Oil Quality and Oil Antioxidant Activity of Maize (Zea mays L.) under Drought Stress

This study was carried out to appraise whether or not the exogenous application of a potential osmoprotectant, proline, could ameliorate the adverse effects of drought stress on maize seed and seed oil composition, as well as oil antioxidant activity. Water stress reduced the kernel sugar, oil, protein and moisture contents and most of the seed macro- and micro-elements analyzed in both maize cultivars but it increased the contents of seed fiber and ash. Water stress increased the oil oleic acid content with a subsequent decrease in the amount of linoleic acid, resulting in an increased oil oleic/linoleic ratio for both maize cultivars. However, no variation was observed in oil stearic and palmitic acids content due to water stress. A considerable drought induced an increase in seed oil α-, γ-, δ- and total tocopherols and flavonoids were observed in both maize cultivars. However, oil phenolic and carotenoid content as well as 1,1-diphenyl-2-picryl-hydrazyl (DPPH) free radical scavenging activity decreased. Foliar-applied proline significantly increased the content of seed sugar, oil, protein, moisture, fiber and ash in both maize cultivars under well irrigated and water deficit conditions. Furthermore, exogenous application of proline increased the oil oleic and linoleic acid contents. The concentrations of antioxidant compounds namely phenolics, carotenoids, flavonoids and tocopherols estimated in the seed oil increased due to foliar-applied proline under water deficit conditions that was positively correlated with the enhanced oil DPPH free radical scavenging activity. Moreover, the increase in the contents of these antioxidant compounds and oil antioxidant activity due to the foliar application of proline was noted to be more pronounced under water deficit conditions.