低温裂纹张开位移预测方法的讨论

把低温影响下的COD试验数据用灰色理论中的累加方法进行累加，可以使一组没有规律的数据成为一条光滑的曲线．然后利用人工神经网络和自适应模糊推理系统两种方法进行预测，算例的结果表明用一次累加后的数列预测精度较高。     

"牺牲"阳极法合成乙醇钽研究

研究了“牺牲“阳极法电化学合成乙醇钽过程中,添加剂种类与浓度、电解液温度、阴阳极极距和电流密度的影响.选取最佳合成条件为:四甲基氯化铵0.04 mol/L,温度为电解液的沸腾温度,极距约2 cm,电流密度220 A/m2.电合成的混合液经常压蒸馏和减压蒸馏,得到产品用红外光谱、拉曼光谱和元素分析进行表征,确定了产品为乙醇钽.电合成的电流效率大于95%,产品蒸馏时钽的直收率82.8%.     

EFFECT OF RARE EARTH ADDITIONS ON THE IMPACT FRACTURE OF Cr18Nil8Si2 STEEL

<正> Cr 18 Ni 18 Si 2钢经热处理后的低温冲击断口,其中加稀土的为穿晶断口,而未加稀土的为混合型断口。 试验用钢用高频感应炉冶炼,锭重20kg,锻成15×15mm方棒,再加工成冲击试样。其化学成分如下。稀土的加入是将一号混合稀土合金缚在钢棒上插入熔池。     

Ionization of Porous Hypercrosslinked Polymers for Catalyzing Room-Temperature CO2 Reduction via Formamides Synthesis

Catalysis Letters - Porous materials with heterogeneous nature occupy a pivotal position in the chemical industry. This work described a facile pre- and post-synthetic approach to modify porous...     

Adsorption characteristics of hexadecyl ammonium with different numbers of carbon chains in montmorillonite and the structure of the prepared composites

Journal of Porous Materials - The dynamics and thermodynamics of adsorption of hexadecyl ammonium with different numbers of carbon chains in montmorillonite (Mt) with different layer charge density...     

钢丝绳张紧装置在大行程拖链上的应用

介绍了给DY3000×20m数控机床大行程拖链增设的张紧装置,该装置解决了拖链无法自动复位的问题,使用方便、经济可行。     

ZrO2制备方法研究进展

以ZrO₂为活性组分或载体的催化剂,在酚类定向催化转化中具有较高的研究价值。总结了ZrO₂的各种制备方法,包括溶胶-凝胶法、共沉淀法、水热法、表面活性剂辅助法、静电纺丝法、热解法、多元醇还原法、反相微乳法和超临界合成法等。阐述了各种方法的反应原理,详细比较了不同制备方法的优劣,并具体分析了制备方法对催化剂结构及性能的影响。     

Preparation of High Strength and Toughness Aramid Fiber by Introducing Flexible Asymmetric Monomer to Construct Misplaced-Nunchaku Structure

High performance fibers with high strength and toughness have great potential in composites, but contradiction between tensile strength and elongation at break makes the preparation to become a current challenge. Herein, an asymmetric structure of more flexible diamine, 3,4′-diaminodiphenyl ether (3,4′-ODA), is introduced into heterocyclic aramid (PBIA) fibers to replace rigid symmetric p-phenylenediamine (PDA). By studying the properties of copolymer (mPEBA) fibers with different ratios of diamine, it is found that the mPEBA fiber reached the optimal mechanical properties with the 30% content of 3,4′-ODA. Compared with homopolymerized heterocyclic aramid fibers, the tensile strength and elongation at break of mPEBA fiber are improved by 26.2% and 38.7%, respectively. Results of X-ray diffraction show that the introduction of 3,4′-ODA structure can increase stretchability of mPEBA fibers, improving the orientation degree during hot-drawing. Molecular dynamics simulations confirm that 3,4′-ODA structure undergoes a conformation transformation to form a straightened chain during hot-drawing, while symmetrical 4,4′-diaminodiphenyl ether (4,4′-ODA) cannot form the same conformation. The misplaced-nunchaku structure is formed based on the special meta-para position of 3,4′-ODA, achieving the synergy of high strength and high toughness.     

Room-Temperature Solid-State Lithium Metal Batteries Using Metal Organic Framework Composited Comb-Like Methoxy Poly(ethylene glycol) Acrylate Solid Polymer Electrolytes

Solid polymer electrolyte with good thermal stability and flexibility is an excellent candidate for solid-state lithium metal batteries, while its low ionic conductivity caused by high crystallinity limits its application at ambient temperature. Here a metal organic framework (zeolitic imidazolate framework-8, ZIF-8) composited comb-like methoxy poly(ethylene glycol) acrylate polymer electrolyte (MCPE) with high ionic conductivity (9.96 × 10⁻⁵ S cm⁻¹ at 30 °C) is prepared by an in situ UV polymerization method. The as-prepared MCPE exhibits improved mechanical property due to the introduction of porous ZIF-8 nanofillers, which is beneficial to suppress the growth of lithium dendrites. Consequently, the LiFePO₄||MCPE||Li cells show a high capacity of 116 mAh g⁻¹ at 30 °C and 0.5 C, and maintain 89.4% of initial capacity after 150 cycles with the average Coulombic efficiency of 99.9%. These results demonstrate that the MCPE shows great potential in solid-state lithium metal batteries near room temperature.     

Degradable Superhydrophilic Iron-Pillared Bentonite Doped with Polybutylene Adipate/Terephthalate Open-Cell Foam: Its Application in Dye Degradation,Removal of Heavy Metal Ions,and Oil–Water Separation

Development of industrialization has brought convenience to people's lives; however, it has also brought serious harm to the environment, where, water pollution is the most obvious. Here, a polybutylene adipate terephthalate (PBAT) open-cell foam doped with iron-pillared bentonite (IPB) is prepared by using sugar as a pore-forming agent and solution phase separation, and then combined with a solution dipping method to coat the foam surface with a polyacrylamide/SiO₂, which makes the PBAT foam superhydrophilic. The static adsorption effect of superhydrophilic IPB-doped PBAT open-cell foam on methylene blue (MB) and Cu²⁺ is studied. The adsorption isotherm fitting shows that the adsorption conforms to the Langmuir model and it has biased toward monolayer adsorption. The adsorption kinetics fitting confirms that the adsorption process is in line with the pseudo-second-order adsorption model, which is dominated by chemical adsorption. The modified PBAT open-cell foam has an adsorption effect on Cu²⁺; however, it has weak cyclic adsorption capacity. It shows a good cyclic adsorption ability for the cationic dye MB and it has >95% photodegradation efficiency of the MB after five time's cyclic adsorption. The superhydrophilicity makes the foam to have better applications in oil–water separation.