磷酸三聚氰胺复盐结晶法净化湿法磷酸技术进展

本文讨论了结晶法净化湿法磷酸方法，对复盐结晶法净化湿法磷酸生产磷酸盐，多聚磷酸盐的生产方法，工艺流程，工艺特点，产品质量进行了研究。     

不同形貌ZnO气敏材料的制备及影响气敏性因素分析

以锌盐和碱为原料,采用水热和溶剂热法合成了三种形貌的氧化锌粉体,利用X射线衍射仪(XRD)、扫描电子显微镜(SEM)和X射线光电子能谱仪(XPS)对产物的结构和形貌及表面化学状态进行了表征,并将粉体制备成厚膜型气敏元件,测试了其对几种还原性气体的气敏性能,结果表明:在工作温度为395℃时,三种形貌氧化锌对相同浓度的同种测试气体的灵敏度大小顺序为:菜花状氧化锌﹥棒状氧化锌﹥六棱柱状氧化锌。并对影响氧化锌材料气敏性的各种因素进行了分析。     

Sliding mode control design via piecewise smooth Lipschitz surfaces based on contingent cone criteria

In order to improve flexibility of sliding mode control (SMC) for a class of nonlinear systems, a new control design method is proposed in this paper. The sliding surface is extended to be a generic Lipschitz continuous surface instead of a smooth one, with which different characteristics of sliding motion may be realized. Due to the nonsmoothness of the sliding surface, the control design problem is discussed in the framework of Filippov’s differential inclusion, by analyzing the geometric properties of the nonsmooth surface. Discontinuous control laws are presented based on new contingent cone criteria, which steer all of the trajectories of the closed-loop system to reach the piecewise smooth sliding surface in finite time.     

用于10-6N~10-5N微力测量的柔性铰链机构设计

在基于静电场原理的微纳力值测量系统中,力值的传递与转化机构起着至关重要的作用。选择平行四边形柔性铰链机构作为其弹性元件,以实现10-6N量级的力值测量。分析了柔性铰链的数学模型,研究了其静态与动态刚度;根据系统要求确定了柔性铰链的目标刚度,并采用有限元方法对其进行优化设计和模态分析;分析了加工精度对铰链刚度的影响。将该铰链用于微力测量系统中,通过实验给出了刚度测试结果和力值测量结果,实验表明,该平行四边形柔性铰链满足微力测量系统对10-6N量级的力值测量要求。     

0.3%印楝素乳油防治水稻二化螟药效试验

0.3%印楝素乳油对水稻二化螟有较好的防治效果,用药后14 d防效达90%左右,而且对稻株无药害,可以作为当前防治二化螟的选择药剂。     

PEGDA/NIPAM共聚物水凝胶的溶胀性能及体积相变研究

以IRGACURE2959为光引发剂,聚乙二醇双丙烯酸酯(PEGAD)和N-异丙基丙烯酰胺(NIPAM)为单体,通过紫外光引发光聚合合成了PEGDA/NIPAM共聚物水凝胶.研究了不同单体质量比凝胶材料在不同温度和pH值下的溶胀性能,测试凝胶在不同温度水中的体积相变.研究结果表明,水凝胶的平衡溶胀率随着NIPAM质量浓度增大而增大,随着环境温度的升高而减小,随着环境pH的增大而增大;NIPAM引入后,随着温度升高达到凝胶低临界溶解温度(LCST)时,凝胶平衡溶胀率及溶胀比减小明显加快,发生体积相变;随着NIPAM质量浓度的增大,凝胶溶胀饱和率减小,凝胶具备良好的延缓溶胀性能.     

ZnO一维纳米结构在金属基底上的原位生长和表征

以Cu—Zn合金片为基底并提供Zn源,在含氧气氛中通过调控反应温度和氧偏压,采用热氧化法直接在Cu-Zn合金片上大面积可控地合成了多种形貌的ZnO一雏纳米材料薄膜（包括纳米带、纳米片、纳米梳和纳米线等）,采用多种分析方法对产物的形貌、结构进行了详细的表征,并对其相应的生长模型进行了讨论。结果表明,反应温度和氧偏压对ZnO纳米结构的生长至关重要,随着反应温度升高或氧含量的减少,气相Zn／O物种的偏压比增加,ZnO纳米结构尺寸变小。     

基于集成压控振荡器的调频电路仿真分析

LM566是一种积分-施密特触发电路型的单片集成 VCO 芯片,在调频电路的教学中作为调制器和解调器,通过对其芯片的仿真,可以在软件平台形象的展示其工作特点,便于定量分析。由于Multisim元件库里没有LM566所需模型,为实现LM566在Multisim12仿真环境中的建模,首先,运用Multisim元件库中现有的基本元件模型,构建LM566芯片内部结构;然后,对外围调频电路的静态工作方式和动态工作方式的分析;最后,实验结果表明,给出的芯片模型能够客观的描述LM566的基本特性,为运用该芯片完成包括调频电路在内的各种功能电路的仿真分析奠定了基础,有效扩展了Multisim仿真软件的使用范围,具有一定的借鉴意义。     

Relationship of structure to properties of surfactants. 16. Linear decyldiphenylether sulfonates

The properties of some well-characterized sodium linear decyldiphenylether (C₁₀DPE)sulfonates have been studied. Among the properties investigated are dynamic and equilibrium surface tension, critical micelle concentration (CMC), area per molecule at the aqueous solution/air interface, wetting time by the Draves technique, foaming by the Ross-Miles method, solubilization, and hydrotropy. The decyldiphenylether moiety appears to be equivalent to a terminally substituted straight alkyl chain of 16 carbon atoms. The trialkyl- and dialkyl-mono-sulfonates have solubilities of < 0.01 g/dm³ in water, but are readily soluble in hexane. The didecyldiphenyl ether disulfonate (DADS) has a very low CMC value (1.0 × 10⁻⁵ mol dm⁻³) in aqueous 0.1 N Na⁺ solution (NaCl), characteristic of surfactants with two hydrophilic and two hydrophobic groups. It also has a much larger area per molecule at the aqueous solution/air interface than the monodecyldiphenyl-ether monosulfonate (MAMS) and a much higher surface tension at the CMC. MAMS has a much lower surface tension at a surface age of 1 second (γ_1s) than either DADS or the monodecyldiphenylether disulfonate (MADS). In agreement with γ_1s and γ_eq values, wetting times increase in the order: MAMS < DADS < MADS and initial foam heights decrease in the order: MAMS > DADS > MADS. Solubilization for three water-insoluble surfactants decreases in the order: DADS > MAMS > MADS, while hydrotropy is most pronounced with the disulfonates.     

光纤通信中自相位调制与四波混频影响因素仿真

为了解决在高速率传输过程中,光纤介质的非线性效应及其在波分复用(WDM)系统中光信号造成的严重衰减问题,围绕自相位调制和四波混频两种非线性效应进行分析,采用Opti System模拟软件分析了造成SPM和FWM效应的主要变量因素.结果表明,输入功率、信道间隔以及色散是造成自相位调制和四波混频性能变化的主要原因,通过调整这些参数可以提高光纤传输性能,为进一步优化奠定了基础.