Comparison of textile dyeing effluent adsorption on commercial activated carbon and activated carbon prepared from olive stone by ZnCl2 activation

Adsorption of Remazol Red B on activated carbon prepared from olive stone and commercial activated carbon from aqueous solutions was compared. Different activating agent (ZnCl₂) amounts and adsorbent particle size were studied to optimize adsorbent surface area. The adsorptive property of commercial activated carbon and activated carbon prepared from olive stone were investigated in terms of adsorbent dose, temperature, equilibrium time and pH. Then the obtained results were compared for all parameters, According to the results, the equilibrium time, optimum pH, adsorbent dosage were found 60 min, pH < 3–4 and 1.0 g/50 ml respectively. Lower adsorption capacity for RRB on activated carbon prepared from olive stone was found. The kinetic data for both adsorbents supports pseudo-second order model (r² > 0.99) and intra-particle model (r² > 0.95) but the first order kinetic model did not adequately fit to the experimental values (r² < 0.76). The equilibrium adsorption data were interpreted using Langmuir and Freundlich models. The adsorption of Remazol Red B was better represented by the Langmuir equation. In addition, the thermodynamic parameters, standard free energy (ΔG°), standard enthalpy (ΔH°), standard entropy (ΔS°) of the adsorption process were calculated for both adsorbents. To reveal the adsorptive characteristics of the produced active carbon, surface area measurements were carried out and structural analysis was performed using SEM-EDS.     

The Effects of Electromagnetic Brake on Liquid Steel Flow in Thin Slab Caster

Computational fluid dynamics (CFD) model with magneto hydro dynamics (MHD) is developed for a thin slab caster to investigate the effects of electromagnetic brake (EMBr) on liquid steel flow in continuous casting mold and to determine the EMBr practices which lead to optimal flow structure. Particle Image Velocimetry (PIV) tests in water model and meniscus flow measurements in real caster are performed to validate the predictions obtained with CFD models. The performance of different submerged entry nozzle designs, SEN 1 and SEN 2, are evaluated. The effects of nozzle submergence in relation to the applied magnetic field on mold flow structure are quantified. There are significant differences between flow structures obtained with SEN 1 and SEN 2, even though both designs have fundamental similarities and contain four ports. EMBr mainly reduces the meniscus velocities for SEN 2 as opposed to the foremost influence of EMBr for SEN 1 that is to significantly slow down the downward jet coming from the bottom ports. In addition, reducing the EMBr strength for shallow nozzle submergence and increasing the EMBr strength for deep nozzle submergence help to maintain similar meniscus activity for all conditions.     

Preparation and application of glycidyl methacrylate and methacrylic acid monomer mixture‐grafted poly(ethylene terephthalate) fibers for removal of methylene blue from aqueous solution

A novel fibrous adsorbent that grafts glycidyl methacrylate (GMA) and methacrylic acid (MAA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers was used for removal of methylene blue (MB) in aqueous solutions by a batch equilibration technique. The operation parameters investigated included, pH of solution, removal time, graft yield, dye concentration, and reaction temperature. The adsorption rate of MB is much higher on the MAA/GMA‐grafted PET fibers than on the ungrafted PET fibers. MB was removed 99% the initial dye concentration at 10 mg L⁻¹ and 93% at 200 mg L⁻¹ by monomers mixture‐grafted PET fibers. Pseudofirst order and pseudosecond order kinetic equations were used to examine the experimental data of different graft yield. It was found that the pseudosecond order kinetic equation described the data of dye adsorption on fibrous adsorbent very well. The experimental isotherms data were analyzed using Langmuir and Freundlich isotherm models. The data was that Freundlich isotherm model fits the data very well for the dyes on the fibers adsorbent. The dye adsorbed was easily desorbed by treating with acetic acid/methanol mixture (50% V/V) at room temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

A new high-performance CMOS fully differential second-generation current conveyor with application example of biquad filter realisation

In this article, a new complementary metal oxide semiconductor (CMOS) high-performance fully differential second-generation current conveyor (FDCCII) implementation is proposed. The presented FDCCII provides high-output impedance at terminals Z+ and Z?, good linearity and excellent output–input current gain accuracy. Also, the proposed FDCCII circuit operates at a supply voltage of ±1.3 V. The applications of the FDCCII to realise voltage-mode multifunction filters are given. Simulations are performed using TSMC CMOS 0.35-μm technology to verify theoretical results.     

Neural Network Based Receiver for Multiuser Detection in MC-CDMA Systems

In this paper, we present a multiuser detection technique based on artificial neural network (NN) for synchronous multicarrier code division multiple access systems over Rayleigh fading channels. To test the robustness of the proposed receiver, also the effect of power control problem is studied with a comparative manner. Bit error rate (BER) performance of the NN based receiver is compared with the single user bound and conventional receivers. Although the BER performance of the conventional receiver degrades as the number of the users and power level differences among the users increase, as a decision structure, neural network based receiver gives closer BER performance to the single user bound.     

Structural, electrochemical and optical comparisons of tungsten oxide coatings derived from tungsten powder-based sols

Tungsten trioxide (WO₃) electrochromic coatings have been formed on indium tin oxide-coated glass substrates by aqueous routes. Coating sols are obtained by dissolving tungsten powder in acetylated (APTA) or plain peroxotungstic acid (PTA) solutions. The structural evolution and electrochromic performance of the coatings as a function of calcination temperature (250 °C and 400 °C) have been reported. Differential scanning calorimetry and X-ray diffraction have shown that amorphous WO₃ films are formed after calcination at 250 °C for both processing routes; however, the coatings that calcined at 400 °C were crystalline in both cases. The calcination temperature-dependent crystallinity of the coatings results in differences in optical properties of the coatings. Higher coloration efficiencies can be achieved with amorphous coatings than could be seen in the crystalline coatings. The transmittance values (at 800 nm) in the colored state are 35% and 56% for 250 °C and 400 °C-calcined coatings, respectively. The electrochemical properties are more significantly influenced by the method of sol preparation. The ion storage capacities designating the electrochemical properties are found in the range of 1.62–2.74 × 10^− 3 (mC cm^− 2) for APTA coatings; and 0.35–1.62 × 10^− 3 (mC cm^− 2) for PTA coatings. As a result, a correlation between the microstructure and the electrochromic performance has been established.     

Selective removal of Cr(VI) ions from aqueous solutions including Cr(VI), Cu(II) and Cd(II) ions by 4-vinly pyridine/2-hydroxyethylmethacrylate monomer mixture grafted poly(ethylene terephthalate) fiber

In this study, a new reactively fibrous adsorbent was prepared by grafting 4-vinly pyridine (4-VP) and 2-hydroxyethylmethacrylate (HEMA) monomer mixture onto poly(ethylene terephthalate) (PET) fibers for removal of Cr(VI), Cu(II) and Cd(II) metal ions from aqueous solution by using batch adsorption method. The influence of various parameters such as graft yield (GY), pH, adsorption time, initial ion concentration and adsorption temperature was investigated. The selectivity of the reactive fiber was also examined. The results show that the adsorbed amount of metal ions followed as given in the order Cr(VI) > Cd(II) > Cu(II). At pH 3, Cr(VI) was removed by 99% while the initial concentration of ions was at 5 mg L⁻¹ and by 94% at 400 mg L⁻¹. It was found that the grafted fiber is more selective for Cr(VI) ions in the mixed solution of Cr(VI)–Cu(II), Cr(VI)–Cd(II) and Cr(VI)–Cu(II)–Cd(II) at pH 3 and it was observed that the grafted fibers are stable and regenerable by acid and base without losing their activity.     

Microbial source tracking using host specific FAME profiles of fecal coliforms

The objective of this study was to investigate the host-specific differences in fatty acid methyl ester (FAME) profiles of fecal coliforms (FC). A known-source library was constructed with 314 FC isolates cultured from 6 possible sources of fecal pollution; 99 isolates from sewage; 29 from bovine; 29 from poultry; 50 from swine; 46 from waterfowl; and 61 from deer. It was found that the hydroxy FAMEs 12:0 2 OH, 12:03 OH, and 14:02 OH were exclusively associated with isolates of human origin. On the other hand, 3 saturated FAMEs, 10:0, 15:0, and 18:0 were found only in isolates from non-human sources, 15:0 being associated with livestock samples only. In addition to the presence of these signature FAMEs, the mean relative masses of 16:1 omega7c and 16:1 ISO/14:03 OH were significantly different between the isolates of human and non-human origins. A linear discriminant function differentiated FC isolates of human origin from those of livestock and wildlife origin at 99% accuracy. These results strongly suggest that the FAME profiles of FC show statistically significant host specificity and may have the potential to be used as a phenotypic microbial source tracking tool.