Identifying the criterion spontaneously minimized during the take-off phase of a sub-maximal long jump through optimal synthesis

Optimal synthesis of human movement or the prediction of the kinematics of a new movement require not only that the multi-body system be modeled but also that a performance criterion is specified. For sub-maximal movements the selection of a suitable performance criterion, able to generate realistic dynamic behavior is difficult. A two-dimensional simulation model of the take-off phase of a sub-maximal long jump was developed to study the effect of criterion choice on the realism of simulated movements. A parametric optimization technique was employed to obtain solutions to the constrained equations of motion. Seven different criteria were evaluated, by comparing simulated movements with an actual performance, to identify the criterion which most closely approximated that spontaneously minimized by the athlete. Synthesis of the take-off phase of a sub-maximal long jump was found to be sensitive to the chosen criterion, with a criterion based on minimizing joint intersegmental forces found to perform well.     

A URI-based approach for addressing fragments of media resources on the Web

To make media resources a prime citizen on the Web, we have to go beyond simply replicating digital media files. The Web is based on hyperlinks between Web resources, and that includes hyperlinking out of resources (e.g., from a word or an image within a Web page) as well as hyperlinking into resources (e.g., fragment URIs into Web pages). To turn video and audio into hypervideo and hyperaudio, we need to enable hyperlinking into and out of them. The W3C Media Fragments Working Group is taking on the challenge to further embrace W3C??s mission to lead the World Wide Web to its full potential by developing a Media Fragment protocol and guidelines that ensure the long-term growth of the Web. The major contribution of this paper is the introduction of Media Fragments as a media-format independent, standard means of addressing media resources using URIs. Moreover, we explain how the HTTP protocol can be used and extended to serve Media Fragments and what the impact is for current Web-enabled media formats.     

Electrical properties of monoazacrown ether-substituted phthalocyanines

D.c. conductivities of polycrystalline monoazacrown ether-substituted phthalocyanines (M=2H, Ni, Zn, Pb, Cu) and diphthalocyanine (M=Lu) are measured as Au-MPc-Au sandwiches to be of the order 10^–10–10^–12 S m^–1. Chemical doping with oxidants (e.g. NOBF₄) and enhancing the stacking of planar phthalocyanine moieties through the formation of alkali metal adducts with sodium and potassium ions leads to increase in conductivity of the order 10¹–10². The low conductivity and the diamagneticity of the bis(phthalocyaninato)-lutetium can be ascribed to the lack of radical nature in LuH(Pc)₂. For the a.c. conductivities, lead and lutetium complexes form a group with higher conductivities and the rest show lower conductivity. The conduction activation energies calculated from Arrhenius plots exhibit the lowest value (0.40 eV) for the lutetium compound.Part of this work was presented at NATO-ASI on Semiconductor Materials and Processing Technologies, Erice, Sicily, 1–13 July 1991.     

SOLUBILITY AND DIFFUSIVITY OF GASES IN AN ORGANIC SOLUTION OF AMINE

Solubilities and diffusivities of carbon dioxide and nitrous oxide in a mixture of toluene and isopropanol organic solution of cyclohexylamine were measured at 20°C in the range of pressures of solute from 1 to 3 bars. This was performed with an original chromatographic technique taking into account the presence of the product of the reaction.     

Crystallinity in PPS–carbon composites: A study using diffuse reflection FT-IR spectroscopy and differential scanning calorimetry

A method based on diffuse reflection Fourier transform infrared (FT-IR) spectroscopy has been developed for determining the state of crystallinity in composite materials made from poly(phenylene sulfide) (PPS) reinforced with carbon fibers. Using this technique, good-quality spectra can be obtained directly from the surface of prepreg or molded composite; thus the method is rapid and nondestructive. Several peaks in the spectrum are sensitive to the crystallinity and can be used for quantitative characterization purposes. The recommended indicator is the ratio of the heights of the peaks at 1075 and 1093 cm^?1. Using a range of samples of varying crystallinity prepared by annealing amorphous prepreg, it has been shown that there is a very good correlation between this ratio and the enthalpy of crystallization as determined by differential scanning calorimetry. The effects of such annealing, as well as heating in air at high temperatures, have been investigated.     

Testing usability and trainability of indirect touch interaction: perspective for the next generation of air traffic control systems

This study aims to determine whether indirect touch device can be used to interact with graphical objects displayed on another screen in an air traffic control (ATC) context. The introduction of such a device likely requires an adaptation of the sensory-motor system. The operator has to simultaneously perform movements on the horizontal plane while assessing them on the vertical plane. Thirty-six right-handed participants performed movement training with either constant or variable practice and with or without visual feedback of the displacement of their actions. Participants then performed a test phase without visual feedback. Performance improved in both practice conditions, but accuracy was higher with visual feedback. During the test phase, movement time was longer for those who had practiced with feedback, suggesting an element of dependency. However, this ‘cost’ of feedback did not extend to movement accuracy. Finally, participants who had received variable training performed better in the test phase, but accuracy was still unsatisfactory. We conclude that continuous visual feedback on the stylus position is necessary if tablets are to be introduced in ATC.     

Optimizing BRDF orientations for the manipulation of anisotropic highlights

This paper introduces a system for the direct editing of highlights produced by anisotropic BRDFs, which we call anisotropic highlights. We first provide a comprehensive analysis of the link between the direction of anisotropy and the shape of highlight curves for arbitrary object surfaces. The gained insights provide the required ingredients to infer BRDF orientations from a prescribed highlight tangent field. This amounts to a non‐linear optimization problem, which is solved at interactive framerates during manipulation. Taking inspiration from sculpting software, we provide tools that give the impression of manipulating highlight curves while actually modifying their tangents. Our solver produces desired highlight shapes for a host of lighting environments and anisotropic BRDFs.     

A genetic algorithm for job-shop scheduling with operators enhanced by weak Lamarckian evolution and search space narrowing

The job-shop scheduling problem with operators is a very interesting problem that generalizes the classic job-shop problem in such a way that an operation must be algorithm to solve this problem considering makespan minimization. The genetic algorithm uses permutations with repetition to encode chromosomes and a schedule generation scheme, termed OG&T, as decoding algorithm. This combination guaranties that at least one of the chromosomes represents and optimal schedule and, at the samhat machines and operators are idle while an operation is available to be processed. To improve the quality of the schedules for large instances, we use Lamarckian evolution and modify the OG&T algorithm to further reduce the idle time of the machines and operators, in this case at the risk of leaving all optimal schedules out of the search space. We conducted a large experimental study showing that these improvements allow the genetic algorithm to reach high quality solutions in very short time, and so it is quite competitive with the current state-of-the-art methods.     

In situ esterification of rice bran oil with methanol and ethanol

In situ esterifications of high-acidity rice bran oil with methanol and ethanol and with sulfuric acid as catalyst were investigated. In the esterification with methanol, all free fatty acids (FFA) dissolved in methanol were interesterified within 15 min, and it was possible to obtain nearly pure methyl esters. The amount of methyl esters obtained from a given rice bran was dependent on the FFA content of the rice bran oil. In the esterification with ethanol, it was not possible to obtain pure esters as in methanol esterification, because the solubilities of oil components in ethanol were much higher than those in methanol.