Air trenches for sharp silica waveguide bends

Air trench structures for reduced-size bends in low-index contrast waveguides are proposed. To minimize junction loss, the structures are designed to provide adiabatic mode shaping between low- and high-index contrast regions, which is achieved by the introduction of "cladding tapers." Drastic reduction in effective bend radius is predicted. We present two-dimensional (2-D) finite-difference time-domain/effective index method simulations of bends in representative silica index contrasts. We also argue that substrate loss, while present, can be controlled with such air trenches and reduced to arbitrarily low levels limited only by fabrication capabilities. The required trench depth, given an acceptable substrate loss, is calculated in three dimensions using an approximate equivalent current sheet method and also by a numerical solver for full-vector leaky modes. A simple, compact waveguide T-splitter using air trench bends is presented.     

Bestimmung der Abtragungsraten von Zirconium,Tantal und der Legierung Tantal-40Niob in fluoridhaltiger azeotroper Salpetersäure mit Hilfe der Radiotracer-Methode

The radiotracer technique as a means to investigate the corrosion of zirconium, tantalum, and a Ta-40Nb alloy in fluoride containing azeotropic nitric acid Zirconium and tantalum as well as the tantalum 40% niobium alloy are of considerable technical importance due to their high corrosion resistance against numerous corrosive media. With respect to corrosion testing in analytically pure azeotropic nitric acid in the temperature range between 20 and 121°C, corrosion rates were determined for zirconium: 7 · 10^?6 to 5 · 10^?4 mm/y, for tantalum: 10^?8 to 4 · 10^?6 mm/y, and for the Ta-40Nb alloy: 2 · 10^?7 to 8 · 10^?6 mm/y [1]. These corrosion rates will be markedly increased by adding small amounts of fluorides or by fluoride impurities. The radiotracer method after neutron activation was applied to determine the corrosion rates in azeotropic fluoride containing nitric acid. Even minute additions of fluorides strongly affect the corrosion resistance of zirconium. In the range between 0.15 and 10 ppm F^? and at a temperature of 108°C, corrosion rates between 5.3 · 10^?3 and 3.1 mm/y were measured. It was impossible to establish a limit for the fluoride concentration, below which the corrosion rate of zirconium will not be adversely influenced. The corrosion rates of tantalum and the Ta-40Nb alloy are considerably increasing above a fluoride concentration of 10 ppm. The highest corrosion rates measured were between 8.4 · 10^?3 mm/y at 50°C/280 ppm F^? and 1.4 · 10^?2 mm/y at 110°C/320 ppm F^?. Within the range of this investigation, the corrosion resistance of tantalum was higher than that of the Ta-40Nb alloy by one order of magnitude. The corrosion resistance of zirconium and tantalum was not influenced by any treatment of the samples before testing.     

Packaging production and consumption in the world and in some industrialized countries

This paper reports on statistics concerning production and consumption of packaging (as a whole or per capita) in Europe, in the USA, in Japan and in the world. Data have been provided by National Trade Associations and by consultants specialized in packaging and in economics. It is estimated that in 1986 the global consumption of packaging reached 150 millions of tonnes valued at 1200 billions of French francs. Consumption could reach 247 million tonnes by the year 2000. Paper and board have the highest consumption rate, but plastics have the highest rate of growth. Nevertheless, consumption per capita in the industrialized countries will be more than 10 times the consumption in underdeveloped countries. The packaging industries take fourth place in the USA, sixth in Western Germany and twelfth in France. In Europe, as in the world, paper and board is the material most used (40%), with glass (a high density material) taking second place and plastics third, i.e. if we consider the quantity of materials and not their value. Some differences appear between the various countries, but the figures for USA and Japan lead to similar conclusions. The survey shows clearly that the USA as compared with Europe has twice the consumption of packaging materials per capita and this difference is even greater compared with the rest of the world.     

Functionalization of PVC by grafting of plasticizing group in a twin screw extruder

Substitution reactions are an appropriate way to attach chemical functions to polymer chains for improving properties and to diversify the application of polymer materials. The stereoselective substitution of chlorine atoms affords a useful way to plasticize polyvinychloride (PVC) by attaching appropriate plasticizing functions (ester group) such as isooctylthiosalicylate. Thus, the substitution of chlorine atoms of PVC by reactant bearing plasticizing groups was carried out in a continuous mixing apparatus such as a twin screw extruder. This continuous chemical engineering process taking place in the extruder is studied as the function of the residence time distribution (RTD) measured by a UV method. This function combined with the kinetics of the chemical reaction allows to define a new function G as the distribution of the extent of conversion by analogy with the RTD function.     

Structure and functional complementation of engineered fragments from yeast phosphoglycerate kinase

Previous studies have shown that, although the isolated structuraldomains of yeast phosphoglycerate kinase recover a quasi-nativestructure in vitro as well as in vivo, they do not reassociatenor generate a functional enzyme. The aim of this work was firstto study the folding of complementary fragments different fromstructural domains and second to determine the requirementsfor their reassociation and functional complementation. Themethod used for producing rigorously defined fragments consistsof the introduction of a unique cysteinyl residue in the proteinfollowed by a specific cleavage by 5'5'-dithiobis(2-nitrobenzoate)/potassiumcyanide at this residue. Two pairs of complementary fragmentswere thus obtained, 1–96/97–415 and 1–248/249–415.The structure and stabilities of the different fragments werestudied. The short fragments, i.e. 1–96 and 249–415were found to contain some secondary structure, but to havea low stability. Each large fragment has a high structural contentand a stability close to that of the corresponding domain. Incontrast to that observed with the isolated domains, a weakbut significant complementation was observed for the two pairsof fragments; the pair of fragments 1–248/249–415recovered 8% of the activity of the native enzyme upon complementation.An independent refolding of the complementary fragments beforereassociation decreased the yield of complementation for thepair of fragments 1–96/97–415, but did not affectthe complementation for the other pair (1–248/249–415).From the present data and previous work on the isolated domains,it appears that the correct folding of the isolated fragmentsis not a prerequisite for their complementation.     

Assessment of response function in two PET scanners with and without interplane septa

The authors have assessed the response function both experimentally and theoretically for two commercial tomographs: CTI 931/08-12 and CTI 953B with and without interplane septa. Monte Carlo simulations were undertaken using the GEANT package from CERN. Spatial resolution (tomographic and axial) was calculated for line sources at various positions in the field of view. Sensitivity and scatter fraction (SF) were calculated for various source geometries as a function of energy discrimination. A very realistic response function in positron emission tomography (PET) is obtained by Monte Carlo methods, using global parameters to account for unsimulated phenomena such as scintillation light transport inside a detector block and its sharing among the various phototubes. Minor discrepancies remain for sensitivity and SF at high energy thresholds and may probably be explained by introducing the observed dispersion in the energy response for the various crystals within a detector block.     

The effects of boundary conditions on the basal glide of ice crystals in compression

Creep experiments were conducted on ice crystals in compression to investigate the effects of boundary conditions on a single-slip system deformed in plane strain. Friction at the platens of the deformation apparatus introduces a bending moment which causes a variation in the amount of lattice rotation across the specimen. This is shown to occur in mechanically constrained crystals observed through plane polarized light. Relieving the constraints and minimizing friction at the ice-platen contact leads to the widening of the sample near the specimen-platen interface and the production of tails symmetrically disposed about the longitudinal axis of the deformed crystals. This is interpreted to originate from a bending moment in the opposite sense from that obtained in the constrained crystals, resulting from a progressive increase in slip displacement towards the platens where the segments of the slip plane become shorter. When the crystal ends were constrained but allowed to move sideways, a simple shear regime was established in which lattice slip was concentrated in the centre of the crystal.     

The k-simultaneous consensus problem

This paper introduces and investigates the k-simultaneous consensus task: each process participates at the same time in k independent consensus instances until it decides in any one of them. It is shown that the k-simultaneous consensus task is equivalent to the k-set agreement task in the wait-free read/write shared memory model, and furthermore k-simultaneous consensus possesses properties that k-set does not. In particular we show that the multivalued version and the binary version of the k-simultaneous consensus task are wait-free equivalent. These equivalences are independent of the number of processes. Interestingly, this provides us with a new characterization of the k-set agreement task that is based on the fundamental binary consensus problem.     

Property Testing of Regular Tree Languages

We consider the edit distance with moves on the class of words and the class of ordered trees. We first exhibit a simple tester for the class of regular languages on words and generalize it to the class of ranked and unranked regular trees. We also show that this distance problem is -complete on ordered trees. A preliminary version of this paper appeared in Proceedings of 31st International Colloquium on Automata, Languages and Programming, volume 3142 of Lecture Notes in Computer Science, pages 932–944, Springer, 2005. Work supported by ACI Sécurité Informatique: VERA of the French Ministry of research.