The influence of potential on the anodic dissolution of SIMFUEL (UO2)

The influence of potential on the anodic dissolution of SIMFUEL (doped uranium dioxide) has been characterized over the range 0-500 mV (versus SCE). Cathodic stripping voltammetry was used to determine the changes in surface reactivity of UO₂ in neutral solutions after different anodic oxidation timescales. Scanning electron microscopy (SEM) was used to view the damage to the SIMFUEL electrode surface which was minimal at E < 200 mV but present as local pits and eroded grains after oxidation at higher potentials. Long-term anodic oxidation at potentials below 200 mV suggests that local acidification can develop within surface asperities in the fuel and pores in corrosion product deposits accumulated on the electrode surface.     

Factors influencing encapsulation behavior in composite droplet-type polymer blends

In this study the influence of the molecular weight of the dispersed phase components on encapsulation effects in the composite droplet phase was examined for high density polyethylene (HDPE)/PS/PMMA ternary blends. Three different blends composed of various PS and PMMA materials dispersed in an HDPE matrix were prepared using an internal mixer. The morphology was studied by light and electron microscopy. Current models used for predicting encapsulation effects and composite droplet formation in ternary systems (based on static interfacial tension) predict in all cases that PS will encapsulate the PMMA. However, in one case, an unexpected encapsulation of PS by PMMA was observed. It was found that arguments based on the effect of viscosity ratio or the absolute viscosity of the different dispersed phases do not explain that discrepancy. In addition, the reversal of that latter composite droplet morphology from PMMA encapsulating PS to PS encapsulating PMMA was observed upon annealing treatment. Considering all the above, a conceptual model was developed to predict encapsulation effects in composite droplet type systems based on the use of a dynamic interfacial tension (i.e. taking into account the elasticity of the polymer components). Calculations based on the dynamic interfacial tension model, using elasticities based on constant shear stress, were able to account for all of the observed encapsulation effects in this study.     

Influence of grafted polypropylene on the mechanical properties of mineral‐filled polypropylene composites

The purpose of this work was to study how mineral fillers would behave in a polypropylene (PP) matrix when PP modified with maleic anhydride (MA) and/or itaconic acid (IA) was used as a coupling agent in the preparation of mineral‐filled PP composites. The composites were characterized with tensile mechanical measurements and morphological analysis. The optimum amount of the coupling agent to be used to obtain composites with improved mechanical properties was established. The results indicated that these coupling agents enhanced the tensile strength of the composites significantly, and the extent of the coupling effect depended on the nature of the interface that formed. The incorporation of coupling agents enhanced the resistance to deformation of the composite. The behavior of IA‐modified PP as a coupling agent was similar to that of a commercial MA‐modified PP for the filled PP composites. Evidence of improved interfacial bonding was revealed by scanning electron microscopy studies, which examined the surfaces of fractured tensile test specimens; their microstructures confirmed the mechanical results with respect to the observed homogeneous or optimized dispersion of the mineral‐filler phase in these composites. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2343–2350, 2007     

Synthesis of copolymers of tert‐butyl vinyl ether with maleic and citraconic anhydrides

In the present study, the effects of charge‐transfer complex formation and intramolecular fragmentation (side‐chain lactonization) in radical copolymerization of tert‐butyl vinyl ether (t‐BVE) with anhydrides of maleic (MA) and citraconic (CA) acids and the structure–thermal behavior relationships of the resulting copolymers were examined using the ¹H‐NMR, FTIR, DSC, and TGA analysis methods. It was shown that copolymerization under the chosen conditions proceeded through intramolecular fragmentation with the formation of γ‐lactone units. Side‐chain fragmentation of t‐BVE–MA and t‐BVE–CA copolymers also was confirmed by TGA and DSC analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2455–2463, 2006 2006     

Combined Ozone Pretreatment and Anaerobic Digestion for the Reduction of Biological Sludge Production in Wastewater Treatment

The ever-increasing amount of solid waste generated by wastewater treatment plants highlights emerging economic and environmental issues. In order to develop new processes producing less sludge, the use of ozone combined with anaerobic digestion was investigated for waste activated sludge treatment. This paper was aimed at evaluating the impact of ozone pretreatment on anaerobic digestion and particularly the enhancement of biogas production. Sludge solubilization was estimated in terms of modification of chemical oxygen demand, solids and nitrogen. Batch anaerobic digestion highlighted the enhancement of ozonated sludge biodegradability. Ozonation led to an increase in biogas production. The ozone dose of 0.15 g O₃/g total solids resulted in a considerable increase in the soluble COD ratio from 4% to 37%. This ozone dose achieved the highest increase in biogas production: 2.4 times greater than without chemical pretreatment.     

Uncooperative gait recognition by learning to rank

Gait is a useful biometric because it can operate from a distance and without subject cooperation. However, it is affected by changes in covariate conditions (carrying, clothing, view angle, etc.). Existing methods suffer from lack of training samples, can only cope with changes in a subset of conditions with limited success, and implicitly assume subject cooperation. We propose a novel approach which casts gait recognition as a bipartite ranking problem and leverages training samples from different people and even from different datasets. By exploiting learning to rank, the problem of model over-fitting caused by under-sampled training data is effectively addressed. This makes our approach suitable under a genuine uncooperative setting and robust against changes in any covariate conditions. Extensive experiments demonstrate that our approach drastically outperforms existing methods, achieving up to 14-fold increase in recognition rate under the most difficult uncooperative settings.     

Optimizing BRDF orientations for the manipulation of anisotropic highlights

This paper introduces a system for the direct editing of highlights produced by anisotropic BRDFs, which we call anisotropic highlights. We first provide a comprehensive analysis of the link between the direction of anisotropy and the shape of highlight curves for arbitrary object surfaces. The gained insights provide the required ingredients to infer BRDF orientations from a prescribed highlight tangent field. This amounts to a non‐linear optimization problem, which is solved at interactive framerates during manipulation. Taking inspiration from sculpting software, we provide tools that give the impression of manipulating highlight curves while actually modifying their tangents. Our solver produces desired highlight shapes for a host of lighting environments and anisotropic BRDFs.     

Catalyst’s Sulfur Displacement by Thiophene, as Monitored by Exchange of 35S Radiotracer

The isotopic exchange has been studied between catalyst radiosulfur and H₂S, formed in thiophene hydrodesulfurization (HDS) (named S-displace) on alumina supported molybdena, on CoMoO_x, PdMoO_x, PtMoO_x and on silica–alumina supported NiWO_x. S-displace was compared with radiosulfur exchange data between catalyst radiosulfur and gas phase H₂S (S^exc) determined previously. The extent of S^exc was higher than that of the S-displace for Mo, CoMo in and NiW, whereas the extent of S-displace from PdMoO and PtMoO was significantly higher, than that of S^exc. Thiophene HDS product distribution data are discussed in terms of increased C=C hydrogenation and C–C hydrogenolysis activity, explained by increasing H₂S production with longer circulation time of the thiophene/H₂ mixture, The C₁/C₃<1 ratios among C₄-hydrogenolysis products indicate some coke formation. The decrease of thiophene HDS activity is presumably a consequence of increasing site-blocking with the formation of more H₂S and coke with longer duration of thiophene treatment.     

A genetic algorithm for job-shop scheduling with operators enhanced by weak Lamarckian evolution and search space narrowing

The job-shop scheduling problem with operators is a very interesting problem that generalizes the classic job-shop problem in such a way that an operation must be algorithm to solve this problem considering makespan minimization. The genetic algorithm uses permutations with repetition to encode chromosomes and a schedule generation scheme, termed OG&T, as decoding algorithm. This combination guaranties that at least one of the chromosomes represents and optimal schedule and, at the samhat machines and operators are idle while an operation is available to be processed. To improve the quality of the schedules for large instances, we use Lamarckian evolution and modify the OG&T algorithm to further reduce the idle time of the machines and operators, in this case at the risk of leaving all optimal schedules out of the search space. We conducted a large experimental study showing that these improvements allow the genetic algorithm to reach high quality solutions in very short time, and so it is quite competitive with the current state-of-the-art methods.     

Crystallization behavior of poly(N‐methyldodecano‐12‐lactam). IV. Nonisothermal crystallization

Nonisothermal crystallization of poly(N‐methyldodecano‐12‐lactam) (MPA) was investigated using DSC method at cooling rates of 2–40 K/min. With increasing cooling rate, crystallization exotherms decreased in magnitude and shifted toward lower temperatures. Subsequent heating runs (10 K/min) showed an exotherm just above T_g, which increased in magnitude with the rate of preceding cooling run, corresponding to the continuation of primary crystallization interrupted as the system crossed T_g on cooling. Kinetic evaluation by the Avrami method gave values of exponent n close to 2.0, suggesting two‐dimensional crystal growth combined with heterogeneous nucleation. The Tobin method, covering the intermediate range of relative crystallinities, provided n ? 2.20, suggesting possible partial involvement of homogeneous nucleation at later stages of nonisothermal crystallization. The crystallization rate parameter k^1/n showed a linear dependency on cooling rate for both methods, the Tobin values being slightly higher. The Ozawa approach failed to provide reasonable values of the kinetic exponent m of MPA. The Augis–Bennet method was used to determine the effective activation energy of the entire nonisothermal crystallization process of MPA. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 95: 564–572, 2005