Vacuum-processed polyethylene as a dielectric for low operating voltage organic field effect transistors

We report on the fabrication and performance of vacuum-processed organic field effect transistors utilizing evaporated low-density polyethylene (LD-PE) as a dielectric layer. With C₆₀ as the organic semiconductor, we demonstrate low operating voltage transistors with field effect mobilities in excess of 4 cm²/Vs. Devices with pentacene showed a mobility of 0.16 cm²/Vs. Devices using tyrian Purple as semiconductor show low-voltage ambipolar operation with equal electron and hole mobilities of ～0.3 cm²/Vs. These devices demonstrate low hysteresis and operational stability over at least several months. Grazing-angle infrared spectroscopy of evaporated thin films shows that the structure of the polyethylene is similar to solution-cast films. We report also on the morphological and dielectric properties of these films. Our experiments demonstrate that polyethylene is a stable dielectric supporting both hole and electron channels.     

Intrinsically Ductile Failure in a Nanocrystalline Beta Titanium Alloy

A nanocrystalline bcc Ti_67.4Nb_24.6Zr₅Sn₃ alloy is shown to fracture in an intrinsically ductile manner with exceptionally large dimples (up to 10 µm) which are two orders of magnitude greater than the grain size (≈ 40 nm). This large plasticity length scale is attributed to a combination of low shear modulus (≈ 27 GPa), high Poisson's ratio (≈ 0.4) and ultrahigh strength (UTS ≈ 1.1 GPa), close to the ideal shear stress, which facilitates ideal shear deformation to promote transgranular shear.     

Influence of the Carbo-Chromization Process on the Microstructural,Hardness, and Corrosion Properties of 316L Sintered Stainless Steel

We report on the changes on the microstructural, hardness, and corrosion properties induced by carbo-chromization of 316L stainless steel prepared by Spark Plasma Sintering technique. The thermo-chemical treatments have been performed using pack cementation. The carburizing and chromization were carried out between 1153 K (880 °C)/4 h to 1253 K (980 °C)/12 h and 1223 K (950 °C)/6 h to 1273 K (1000 °C)/12 h in a solid powder mixture of charcoal/BaCO₃ and ferrochromium/alumina/NH₄Cl, respectively. The obtained layers were investigated using X-ray and electron diffraction, optical and scanning electron microscopies, Vickers micro-hardness, and potentiodynamic measurements. The thickness of the carbo-chromized layer ranges between 300 and 500 μm. Besides the host γ-phase, the layers are mainly constituted of carbides (Fe₇C₃, Cr₂₃C₆, Cr₇C₃, and Fe₃C) and traces of α′-martensite. The average hardness values decrease smoothly from 650 HV at the sample surface down to 200 HV at the center of the sample. The potentiodynamic tests revealed that the carbo-chromized samples have smaller corrosion resistance with respect to the untreated material. For strong chromization regimes, the corrosion rate is increased by a factor of four with respect to that of the untreated material, while the micro-hardness of the layer is three times larger. Such materials are suited to be used in environments where good corrosion resistance and wear properties are required.     

Reduced Order Observer for Linear Time-Invariant Multivariable Systems with Unknown Inputs

This paper presents the design of a new reduced order observer to estimate the state for a class of linear time-invariant multivariable systems with unknown inputs. The proposed design approach is a combination of the approaches proposed by Hou and Muller (IEEE Trans. Autom. Control 37:871–875, 1992) and Boubaker (Int. J. Autom. Control Syst. Eng. 5:45–51, 2005); matrix decompositions, state transformations, and substitutions based on coordinate changes are used. It is shown that the problem of reduced order observers for linear systems with unknown inputs can be reduced to a standard one (the unknown input vector will not interfere in the observer equations). The effectiveness of the suggested design algorithm is illustrated by a numerical example (aircraft lateral motion), and, for the same aircraft dynamics, we compare our new observer with other already existing observers from the existence conditions and dynamic characteristics point of view; the superiority of the new designed observer is demonstrated.     

Design and implementation of tuned viscoelastic dampers for vibration control in milling

Passive means of vibration attenuation have been employed successfully and efficiently in machining systems such as turning and milling. Traditional approach to controlling vibration in a milling system is to develop control mechanisms for cutting tools or machine spindles. However, due to the nature of milling operations where the cutting tools rotate at high speed, the passive vibration control methods find very limited application with the traditional approach. In order to utilise the potential of the passive vibration control methodology in milling applications, the milling operation should be viewed as a system comprising an elastic structure and operation parameters. Dynamics of this closed-loop system should improve with improvement in dynamics of any of the system components, especially within the elastic structure that comprises the cutting tool, the machine tool, the workholding system and the workpiece. Although the level of improvement will vary depending on which component of the elastic chain is targeted for this purpose. This paper presents the development and testing of tuned viscoelastic dampers (TVDs) for vibration control through their application on a workpiece in milling operations. This work targets workpiece held on a palletised workholding system for the control of unwanted vibration and thus deviates from the traditional approach where cutting tool and/or machine spindles are targeted for vibration control strategies. Palletised workholding systems, due to their compact design, offer an opportunity to design passive damping mechanisms that are easier to implement in the case of a milling system. The TVD developed through this research is based on a commercially available viscoelastic damping polymer. Advantage of such materials is their high damping performance over a wide range of excitation frequencies. The TVD design process has used a unique combination of analytical modelling with experimental FRF data. Modal impact testing showed that the application of the TVD reduced the amplitude of vibration acceleration by 20 dB for the target mode. Since the target mode corresponded to torsional vibration, the TVD was effective in two planar coordinates, i.e. X and Y. In addition, the TVD also significantly reduced the amplitude of a vibration mode far from the mode it was designed for. The system has been tested experimentally to demonstrate significant reduction in vibration amplitudes during a milling process. The milling tests with different combinations of cutting parameters show that multi-TVD approach is always valid regardless of the parameters being used. The only requirement for TVDs to function effectively is that the natural frequency of the system, for which the TVDs are designed, is excited during the milling process.     

Novel Tumor-Targeting Nanoparticles for Cancer Treatment—A Review

Being one of the leading causes of death and disability worldwide, cancer represents an ongoing interdisciplinary challenge for the scientific community. As currently used treatments may face limitations in terms of both efficiency and adverse effects, continuous research has been directed towards overcoming existing challenges and finding safer specific alternatives. In particular, increasing interest has been gathered around integrating nanotechnology in cancer management and subsequentially developing various tumor-targeting nanoparticles for cancer applications. In this respect, the present paper briefly describes the most used cancer treatments in clinical practice to set a reference framework for recent research findings, further focusing on the novel developments in the field. More specifically, this review elaborates on the top recent studies concerning various nanomaterials (i.e., carbon-based, metal-based, liposomes, cubosomes, lipid-based, polymer-based, micelles, virus-based, exosomes, and cell membrane-coated nanomaterials) that show promising potential in different cancer applications.     

Reversed and Anomalous Doppler Effects in Photonic Crystals and other Time-dependent Periodic Media

We predict that reversed and anomalous non-relativistic Doppler shifts can be observed under some circumstances when light reflects from a shock wave front propagating through a photonic crystal, or material with a periodic modulation of the dielectric. This theoretical prediction is generalizable and applies to wave-like excitations in a variety of periodic media. An experimental observation of this effect has recently been made (Seddon, N. and Bearpark, T. Science, 302 (2003) 1537) and we provide a brief discussion of this experiment.     

Hierarchically structured polymer blends based on silsesquioxane hybrid nanocomposites with quaternary ammonium units for antimicrobial coatings

The paper reports the first study on hierarchical assemblies (nanofibrillar micelles confined within semi-cylindrical shells) with silsesquioxane and quaternary ammonium units obtained through polymer blending intended for antimicrobial/antifungal stone coatings. The formation of hierarchical structures on solid surfaces is due to the multiple intermolecular ionic interactions, intermolecular Van der Waals and hydrophobic interactions acting among the component molecules. Their antimicrobial/antifungal properties toward the Gram-negative bacteria, Escherichia coli, Gram-positive bacteria, Staphylococcus aureus, and Candida albicans fungus were determined in aqueous solution and were found to be strongly dependent of the topographical features of the coating.     

Specific Local Predictors That Reflect the Tropism of Endometriosis—A Multiple Immunohistochemistry Technique

Ectopic endometrial epithelium associates a wide spectrum of symptomatology. Their evolution can be influenced by inflammatory and vascular changes, that affect not only the structure and cell proliferation rate, but also symptoms. This prospective study involved tissue samples from surgically treated patients, stained using classical histotechniques and immunohistochemistry. We assessed ectopic endometrial glands (CK7+, CK20−), adjacent blood vessels (CD34+), estrogen/progesterone hormone receptors (ER+, PR+), inflammatory cells (CD3+, CD20+, CD68+, Tryptase+), rate of inflammatory cells (Ki67+) and oncoproteins (BCL2+, PTEN+, p53+) involved in the development of endometriosis/adenomyosis. A CK7+/CK20− expression profile was present in the ectopic epithelium and differentiated it from digestive metastases. ER+/PR+ were present in all cases analyzed. We found an increased vascularity (CD34+) in the areas with abdominal endometriosis and CD3+−:T-lymphocytes, CD20+−:B-lymphocytes, CD68+:macrophages, and Tryptase+: mastocytes were abundant, especially in cases with adenomyosis as a marker of proinflammatory microenvironment. In addition, we found a significantly higher division index-(Ki67+) in the areas with adenomyosis, and inactivation of tumor suppressor genes-p53+ in areas with neoplastic changes. The inflammatory/vascular/hormonal mechanisms trigger endometriosis progression and neoplastic changes increasing local pain. Furthermore, they may represent future therapeutic targets. Simultaneous-multiple immunohistochemical labelling represents a valuable technique for rapidly detecting cellular features that facilitate comparative analysis of the studied predictors.