Enhancing the electrical conductivity of carbon black/graphite nanoplatelets: Poly(ethylene‐butyl acrylate) composites by melt extrusion

The influence of processing parameters such as screw geometry, temperature profile, and screw speed on the electrical properties of hybrid composites consisting of graphite nanoplatelets and carbon black in ethyl butyl acrylate was studied. Two different screws were used to compound the hybrid composites at two different temperatures and two different screw speeds. A beneficial effect was noted with regard to the electrical properties when adding nanoplatelets to the filler system. The cause could be a synergistic effect due to the difference in particle shape of the two fillers. Lower percolation thresholds were obtained with the conventional screw due to less breakage of the graphite nanoplatelets compared to the barrier screw. No significant changes of the electrical properties were observed when changing the temperature profiles or the screw speeds. Furthermore, the melt viscosity of the compounds was not appreciably affected at the rather low filler contents used here. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 42897.     

Epoxy–graphite oxide nanocomposites: Mechanical properties

Graphite oxide (GO) produced by Hummers method was added to epoxy for strengthening purpose. Generally the E‐modulus was increased due to the GO addition; however, depending on the treatment of the GO an increase or decrease was observed for the glass transition temperature. The change in glass transition was a result of changes in the curing behavior. Addition of GO initially increased the curing speed; however, the final curing degree was lower and was dependent on the type of GO added. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43591.     

The Effects of KCl,NaCl and K<Subscript>2</Subscript>CO<Subscript>3</Subscript> on the High-Temperature Oxidation Onset of Sanicro 28 Steel

The present study investigates the early stages in the oxidation process of Sanicro 28 (Fe31Cr27Ni) stainless steel when exposed to an alkali salt (KCl, NaCl or K₂CO₃) for 2 h at 450 and 535 °C. After the exposure, the oxidized samples were analyzed with a combinatory method (CA, XPS and SEM–EDX). It was found that all three salts were corrosive, and the overall oxidation reaction rate was much higher at 535 °C than at 450 °C. There were clear differences in terms of the impact of cations (Na⁺, K⁺) and anions (Cl^?, CO₃ ^2?) on the initial corrosion process at both temperatures. When focusing on the cations, the presence of potassium ions resulted in a higher rate of chromate formation than in the presence of sodium ions. When studying the effect of anions, the oxidation of iron and chromium occurred at higher rates in the presence of both chloride salts than in the presence of the carbonate salt, and chloride salts seemed to possess higher diffusion rate in the gas phase and along the surface than carbonate salts. Moreover, at the higher temperature of 535 °C, the formed chromate reacted further to chromium oxide, and an ongoing oxidation process of iron and chromium was identified with a significantly higher reaction rate than at 450 °C.     

Simulation of the interactions between hydraulic and natural fractures using a fracture mechanics approach

HYDROCK method aims to store thermal energy in the rock mass using hydraulically propagated fracture planes. The hydraulic fractures can interact with the pre-existing natural fractures resulting in a complex fracture network, which can influence the storage performance. This study investigates the interactions between hydraulic and natural fractures using a fracture mechanics approach. The new functionality of the fracture mechanics modelling code FRACOD that enables crossing of hydraulically driven fracture by a pre-existing fracture is presented. A series of two-dimensional numerical models is prepared to simulate the interaction at different approach angles in granitic rock of low permeability. It is demonstrated that multiple interaction mechanisms can be simulated using the fracture mechanics approach. The numerical results are in agreement with the modified Renshaw and Pollard analytical criterion for fracture crossing. The results show that for large approach angles, the hydraulic fracture crosses the natural fracture, whereas for small approach angles, the hydraulic fracture activates the natural fracture and the wing-shaped tensile fractures are propagated from its tips. Thus, the presence of fractures with low dip angles can lead to the growth of more complex fracture network that could impair the thermal performance of the HYDROCK method.     

Flue gas cleaning by periodic absorption

Simulations and designs are presented of conventional and periodic SO₂ absorption from exhaust gases using salt water as absorption solvent. Operating conditions resemble those of a maritime operation, involving relatively small amounts of SO₂, so the separation is in the linear region. The advantages of periodic operation, as already demonstrated for conventional distillation remain valid for absorption processes: Less tall towers, than staged towers are possible, or substantially less salt water is required for the process employing periodic cycling.     

Insights into corrosion in dye solar cells

The main issue in using low cost metals in dye solar cells is the corrosion caused by the liquid electrolyte. Contrary to typical applications of metals, the adverse effects of corrosion in dye solar cells are related to irreversible depletion of charge carriers from the electrolyte rather than consumption of the metal itself. It is calculated that the penetration rate due to corrosion should not exceed 10⁻⁴ mpy (a couple of nanometers per year) to ensure device lifetime longer than 1 year. This is 10 000 times slower rate than what is considered to be a general benchmark value for very low corrosion rate in the field of corrosion science and has a major effect on how corrosion should be investigated in the case of dye solar cells. Different methods, their applicability, and limitations to investigate corrosion in dye solar cells are evaluated here. The issue with most techniques is that they can detect metals that are clearly corroding, but they have significant limitations in proving a metal stable. Our investigation shows that the most reliable information on corrosion is obtained from complete dye solar cells that are exposed to working conditions. A combination of color analysis of the electrolyte to such measurement is proposed as a means to extrapolate future performance of the cells and estimate potential lifetimes of the dye solar cells in regards to corrosion. Copyright © 2014 John Wiley & Sons, Ltd.     

Mechanical and thermal characterization of compression moulded polylactic acid natural fiber composites reinforced with hemp and lyocell fibers

This research evaluates the effects of PLA/PP blend ratio and Lyocell/hemp mixture ratio on the morphology, water absorption, mechanical and thermal properties of PLA‐based composites. The composites were fabricated with 30 mass % hemp using compression moulding. As a reference composites made from PP were also studied. Combining of hemp and Lyocell in PLA composite leads to the reduction of moisture absorption and can improve the impact, tensile, flexural properties when compared with PLA/hemp. Composite based on the PLA/PP blend‐matrix could not improve the tensile and flexural properties compared with PLA/hemp, however; the lighter composite with better impact properties was obtained. The crystallization temperature of the PLA‐PP/hemp increased compared with pure PLA. This result was also confirmed by the SEM micrographs. The moisture absorption of PLA‐PP/hemp was higher than PLA/hemp. Based on theoretical analysis of DMTA data, there was favorable adhesion in all composites. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40534.     

CFD study of non-premixed swirling burners: Effect of turbulence models

This research investigates a numerical simulation of swirling turbulent non-premixed combustion. The effects on the combustion characteristics are examined with three turbulence models: namely as the Reynolds stress model, spectral turbulence analysis and Re-Normalization Group. In addition, the P-1 and discrete ordinate (DO) models are used to simulate the radiative heat transfer in this model. The governing equations associated with the required boundary conditions are solved using the numerical model. The accuracy of this model is validated with the published experimental data and the comparison elucidates that there is a reasonable agreement between the obtained values from this model and the corresponding experimental quantities. Among different models proposed in this research, the Reynolds stress model with the Probability Density Function (PDF) approach is more accurate (nearly up to 50%) than other turbulent models for a swirling flow field. Regarding the effect of radiative heat transfer model, it is observed that the discrete ordinate model is more precise than the P-1 model in anticipating the experimental behavior. This model is able to simulate the subcritical nature of the isothermal flow as well as the size and shape of the internal recirculation induced by the swirl due to combustion.     

Cooling causes changes in the distribution of lipoprotein lipase and milk fat globule membrane proteins between the skim milk and cream phase

Lipoprotein lipase (LPL) activity and free fatty acid levels were studied in freshly milked, uncooled milk from individual Danish Holstein or Jersey cows, or after storage for up to 24 h at either a cooling temperature (4°C) or at the milking temperature (31°C). Upon cooling for up to 24 h, LPL activity increased in the cream phase, whereas the activity in the skim milk was steady, as observed for Jersey cows, or increased, as seen for the Holsteins. Storage at 31°C decreased the LPL activity in both the cream phase and the skim milk phase. The increase in free fatty acid levels was found to depend on LPL activity, incubation temperature, substrate availability, and incubation time. Furthermore, the migration of milk proteins between the skim milk phase and the cream phase upon cooling of milk from Jersey cows or from Danish Holstein cows was studied using proteomic methods involving 2-dimensional gel electrophoresis and mass spectrometry. Proteins associated with the milk fat globules were isolated from all milk fractions and analyzed. Major changes in the distributions of proteins between the skim milk phase and the cream phase were observed after cooling at 4°C for 4 h, where a total of 29 proteins between the 2 breeds was found to change their association with the milk fat globule membrane (MFGM) significantly. Among these, the MFGM proteins adipophilin, fatty acid-binding protein, and lactadherin, as well as the non-MFGM proteins β-casein, lactoferrin, and heat shock protein-71, were identified. Adipophilin, lactadherin, and lactoferrin were quantitatively more associated with the MFGM upon cold storage at 4°C, whereas β-casein, fatty acid-binding protein, and heat shock protein-71 were found to be less associated with the MFGM upon cold storage.