Modification of Substrate Specificity Resulting in an Epoxide Hydrolase with Shifted Enantiopreference for (2,3‐Epoxypropyl)benzene

Random mutagenesis targeted at hotspots of noncatalytic active‐site residues of potato epoxide hydrolase StEH1 combined with an enzyme‐activity screen allowed the isolation of enzyme variants displaying altered enantiopreference in the catalyzed hydrolysis of (2,3‐epoxypropyl)benzene. The wild‐type enzyme favored the S enantiomer with a ratio of 2.5:1, whereas the variant displaying the most radical functional changes showed a 15:1 preference for the R enantiomer. This mutant had accumulated four substitutions distributed over two out of four mutated hotspots: W106L, L109Y, V141K, and I151V. The underlying causes of the enantioselectivity were a decreased catalytic efficiency in the catalyzed hydrolysis of the S enantiomer combined with retained activity with the R enantiomer. The results demonstrate the feasibility of molding the stereoselectivity of this biocatalytically relevant enzyme.     

Biobased composites prepared by compression molding with a novel thermoset resin from soybean oil and a natural‐fiber reinforcement

Biobased composites were manufactured with a compression‐molding technique. Novel thermoset resins from soybean oil were used as a matrix, and flax fibers were used as reinforcements. The air‐laid fibers were stacked randomly, the woven fabrics were stacked crosswise (0/90°), and impregnation was performed manually. The fiber/resin ratio was 60 : 40. The prepared biobased composites were characterized by impact and flexural testing. Scanning electron microscopy of knife‐cut cross sections of the specimens was also done to investigate the fiber–matrix interface. Thermogravimetric analysis of the composites was carried out to provide indications of thermal stability. Three resins from soybean oil [methacrylated soybean oil, methacrylic anhydride modified soybean oil (MMSO), and acetic anhydride modified soybean oil] were used as matrices. The impact strength of the composites with MMSO resin reinforced with air‐laid flax fibers was 24 kJ/m², whereas that of the MMSO resin reinforced with woven flax fabric was between 24 and 29 kJ/m². The flexural strength of the MMSO resin reinforced with air‐laid flax fibers was between 83 and 118 MPa, and the flexural modulus was between 4 and 6 GPa, whereas the flexural strength of the MMSO resin reinforced with woven fabric was between 90 and 110 MPa, and the flexural modulus was between 4.87 and 6.1 GPa. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Incorporating amylopectin in poly(lactic acid) by melt blending using poly(ethylene‐co‐vinyl alcohol) as a thermoplastic carrier. (I) morphological characterization

In this study, the possibility of using a biodegradable grade of thermoplastic poly(ethylene‐co‐vinyl alcohol) with high (71 mol %) vinyl alcohol (EVOH‐29), as a carrier to incorporate the renewable and biodegradable component amylopectin (AP) into poly(lactic acid) (PLA) through melt blending, was investigated. The effect of using a plasticizer/compatibilizer (glycerol) in the blend systems was also investigated. In a first step, the EVOH/AP blends were produced and thereafter, in a second step, these were mixed with PLA. In this first study, the blend morphology was investigated using optical microscopy, scanning electron microscopy and Raman imaging spectroscopy and the thermal properties were measured by differential scanning calorimetry. Despite the fact that EVOH and AP are both highly polar, their blends were immiscible. Still, the blends exhibited an excellent phase dispersion on a micron level, which was enhanced further by the addition of glycerol. A good phase dispersion was finally observed by incorporation of the latter blends in the PLA matrix, suggesting that the proposed blending route can be successfully applied for these systems. Finally, the Differential scanning calorimetry (DSC) data showed that the melting point of EVOH dropped in the EVOH/AP blends, but the properties of the PLA phase was still relatively unaffected as a result of blending with the above components. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Novel Foams Based on Freeze‐Dried Renewable Vital Wheat Gluten

A new way of producing rigid or semi‐rigid foams from vital wheat gluten using a freeze‐drying process is reported. Water/gluten‐based mixtures were frozen and freeze‐dried. Different foam structures were obtained by varying the mixing process and wheat gluten concentration, or by adding glycerol or bacterial cellulose nanofibers. MIP revealed that the foams had mainly an open porosity peaking at 93%. The average pore diameter ranged between 20 and 73 µm; the sample with the highest wheat gluten concentration and no plasticizer had the smallest pores. Immersion tests with limonene revealed that the foams rapidly soaked up the liquid. An especially interesting feature of the low‐wheat‐concentration foams was the “in situ” created soft‐top‐rigid‐bottom foams.

     

Growth of ω inclusions in Ti alloys: An X-ray diffraction study

We investigated the size and crystal structure of nanometer-sized ω inclusions in single crystals of β-Ti alloys by X-ray diffraction pole-figure measurements and reciprocal space mapping. We studied the topotactical relation of the β and ω crystal lattices, and from the positions and shapes of the diffraction maxima of the ω lattice determined the mean size of the ω inclusions and the misfit of the inclusion lattice with respect to the host lattice, as well as their changes during ageing. The lattice of the ω inclusions exhibits a large positive misfit already before ageing and the misfit is subsequently reduced during the ageing process. Using the theories of elasticity and X-ray scattering we simulated diffuse X-ray scattering around the β diffraction maxima and demonstrated that the diffuse scattering is caused mainly by local elastic strains in the β host phase around the ω inclusions.     

Super/subcritical fluid extractions for preparation of the crystalline titania

Various extraction techniques which use fluids in super/subcritical state (CO₂, H₂O, CH₃OH) were used for the preparation of crystalline TiO₂ from surfactant-mediated titania organogels (the amorphous reaction intermediate products of surfactant-mediated sol-gel synthesis). Crystallinity, purity and texture of TiO₂ powders (titania aerogels) were studied in detail for different treatment modes of titania organogels. Suitable combinations of extraction solvents and extraction temperature and pressure were considered for synthesis of TiO₂ powder crystalline phase (anatase) with high specific surface area and purity (carbon content < 0.1 wt.%). Optimum results were achieved by combined extraction procedures—subcritical water extraction and supercritical fluid extraction or pressurised liquid extraction. Moreover, the possible tuning of the TiO₂ powder pore-size distribution by regulation of temperature at constant pressure for the combined subcritical water extraction and pressurised liquid extraction was found.     

Derivation of the conditional moment closure equations for spray combustion

In this work we derive the fundamental equations for conditional moment closure (CMC) modelling of individual phases set in a two-phase flow. The derivation is based on the instantaneous transport equations for the single phase that involve a level set/indicator function technique for accounting for interfaces. Special emphasis is put on spray combustion with the CMC equations formulated for the gas phase. The CMC equations are to be viewed as an adjunct to existing methods for the modelling of the dynamics of sprays: they provide a refinement of the modelling of chemical reactions in the gas phase. The resulting CMC equations differ significantly from those already in use in the literature. They contain, of course, unclosed terms that need to be modelled. Investigation of the unclosed terms associated with evaporation at the droplet surface is well beyond the capabilities of laboratory measurement or direct numerical simulation. It is proposed that modelling of these terms be based on the well-established ‘laws’ of similarity between heat and mass transfer: an example is detailed for one example of the general modelling of the spray dynamics. Other unclosed terms are important throughout the gas phase. Models used for these terms in single-phase flows are reviewed and it is proposed that any modifications needed for these models be investigated by DNS of suitable model problems having good resolution of the flow and mixing in the inter-droplet space. It is proposed that a spray analogue of the scalar mixing layer that has been widely studied in single-phase flows be used as the model problem for such DNS studies and also for LES and RANS modelling.     

Does sodium fluoride in bone cement affect implant fixation? Part I: Bone tissue response, implant fixation and histology in nine rabbits

The addition of sodium fluoride to poly (methyl-methacrylate) (PMMA) bone cement may theoretically improve the fixation of joint replacement. This hypothesis was tested in an animal model using nine mature healthy lop-eared rabbits. A femoral prosthesis was inserted in both knees to resurface the patellofemoral articulation. The same acrylic cement, with and without sodium fluoride, was randomised between the two sides for prosthetic fixation. Two screw shaped implants machined from cured rods of either cement were also inserted bilaterally into the proximal tibia. Qualitative and quantitative histomorphometry of the bone tissue response surrounding the cement in the femur and the intact tibial implants revealed similar results regardless of sodium fluoride addition. Six weeks after surgery removal, torque did not significantly differ between the two sides. Our findings indicate that addition of sodium fluoride to PMMA has little effect on implant stability and bone remodeling in rabbits in the short-term.     

Empirical model for the waveguiding properties of directly UV-written waveguides

We present an empirical model for the waveguiding properties of directly UV-written planar waveguides in silica-on-silicon. The waveguides are described by a rectangular core step-index profile, in which model parameters are found by comparison of the measured waveguide width and effective index with modal field calculations. The model is used as input for beam propagation method calculations to design UV-written optical components. Subsequent fabrication of such components showed a good agreement with the model predictions. Using the model will reduce the number of iterations and thereby the development time of new optical devices.