High Temperature Schottky Barrier on n-Type SrTiO3 and Its Sensitivity to Ambient Gases

Metal or oxide electrodes (Pt, Au, Ag, (La, Sr)CoO₃) were deposited on single crystals of 0.02 mol% Nb doped SrTiO₃ by pulsed laser deposition. Current-voltage and capacitance-voltage responses were measured using three-terminal electrode configuration. Under high oxygen partial pressures, clear rectification behaviors were observed. Diffusion model well explained the current vs. voltage relationship with ideality factors close to unity. The barrier height varied reversibly with oxygen partial pressure, and was almost independent of the electrode materials, which suggested that the Fermi level at the interface was pinned by the surface states. The origin of the surface states was discussed in terms of oxygen adsorption or oxidative formation of metal vacancies around the surface. Chemical interaction between the surface and oxygen and resulting cation rearrangement was concluded to play an important role from the long stabilization time on oxygen partial pressure change. The water vapor pressure dependence of the barrier height was also explained by competitive adsorption of oxygen and water.     

Linear bipolar OTAs employing exponential‐law circuits

This paper presents design of linear bipolar OTAs, which are composed of two function blocks; one is an exponential‐law circuit and the other is a core cell. Multi‐tanh cells are employed as the core cell. This kind of OTA has lower power dissipation relatively to the conventional multi‐tanh cell. According as the order of the multi‐tanh core cell becomes higher, the number of circuit realization for the core cell increases. For example, we have two OTAs for the core circuit of an emitter‐coupled pair and four OTAs for the doublet core cell. Thus, we consider the generalized OTAs for an arbitrary order n of the core cell and obtain a formula to give the realization number of the linear OTAs for n. According to the formula, there must be eight OTAs in the case of n=3. All of the eight OTAs are examined. Analysis and simulation results show that the OTAs have advantage in their characteristics, such as linear input range, power dissipation, noise, and frequency response. Copyright 2004 John Wiley & Sons, Ltd.     

Noncorrosive separator materials for electric double layer capacitor

The paper evaluates noncorrosive and inexpensive materials, namely polypropylene sheet, fiberglass, and glass wool, as potential separator materials for electric double‐layer capacitor (EDLC) application. Using these materials as separators and the same activated carbon electrodes, properties of two‐electrode capacitors filled with aqueous sulfuric acid (H₂SO₄) were investigated by cyclic voltammetry (CV) as well as galvanostatic and electrochemical impedance spectroscopy (EIS) measurements. Performance comparison of the tested capacitors with an identical capacitor with conventional cellulose separator was also carried out. As a benchmark, the noncorrosive‐separator‐based capacitors demonstrate comparable power and energy densities to those of a cellulose separator, with the highest specific capacitance of 131 F/g and lowest equivalent series resistance of 13 Ω for the glass wool separator. Application of such noncorrosive separators may realize the utilization of high‐concentration aqueous electrolytes, leading to higher rating EDLCs at lower cost compared to organic‐solution‐based capacitors. © 2014 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.     

Properties evaluation and fabrication of green clay reformulated from water sludge

Water sludge from Sungai Dua Penang fresh water processing plant has been successfully converted into functional pottery clay with improved physicochemical behavior and properties. Water sludge was generally made of kaolinite mineral that consisted of silica and alumina. At 7 h of milling duration, water sludge demonstrated a narrow particle size distribution at the size range of 107–150 µm. Water sludge owned a specific surface area of 27 m²/g with 8.8 nm (diameter) pore size and 0.05 cm³/g pore volume. Plasticity of clay body increased when clay formulation involved fine particles, e.g. water sludge or bentonite, which promote water adsorption ability. Fine particles with large surface area and better compaction also explained the enhanced hardness of pottery clay. The incorporation of clay minerals such as bentonite and sodium silicate into the formulation has facilitated metals immobilization within the clay body. Final clay product has a terra cotta color and performed a uniform shrinkage without obvious fracture. The fabrication of pottery wares from water sludge with minimized metals leakage has not only higher reutilize value but also a cost effective green method for handling waste and environmental issues.     

Soluble and colorless polyimides with polyalicyclic structures [1]

Two tetracarboxylic dianhydrides with polyalicyclic structure, bicyclo[2.2.2]octane-2-endo, 3-endo, 5-exo, 6-exo-2,3:5,6-dianhydride (5a) and the all-exo isomer (5b), were synthesized in six steps using phthalic acid as a starting material. The dianhydrides were polymerized at 85–105°C in well-purified DMAc with aromatic diamines which were purified by two recrystallizations and then sublimation. The polyimides formed flexible and tough films, and were soluble in aprotic polar solvents such as DMAc. The 5%-weight loss temperatures were over 450°C. The polyimides possessed glass-transition temperatures in the range from 211 to 385°C. The polyimides films had a tensile modulus range of 1.5–2.6 GPa, a tensile strength range of 52–96 MPa, and an elongation range at break of 3–11%. The polyimide films showed cutoffs at wavelengths shorter than 320 nm and were entirely colorless. The colorlessness of the polyimide films was maintained up to 200°C when heated in air and to 400°C in a N₂ atmosphere.     

Properties of novel diallyl phthalate resin modified with sulfur‐containing allyl ester compounds

Sulfur‐containing allyl ester, which reacts with diallyl phthalate (DAP) resin to have allyl groups, was synthesized by the reaction of allyl phthalic acid with bisphenol having sulfur atoms. The sulfur‐containing allyl ester compound was blended with DAP resin to improve the adhesive properties to copper. By modification with sulfur‐containing allyl ester compound, the T‐peel adhesive strength and the lap shear adhesive strength to copper was improved. In particular, the adhesive strength was greatly improved when the resin was modified with the allyl ester compound having a disulfide bond (?S?S?) (DADS). It is concluded that this result is due to the improvement of the interfacial adhesive strength because the sulfur atom was found to be located in the surface of the copper by Fourier transform infrared (FTIR) analysis. The glass transition temperature (T_g) and the thermal decomposition temperature (T_d) of the cured DAP resin modified with DADS slightly decreased with increasing concentration of DADS. The lowering of T_g is because the crosslinking density of the DAP resin modified with DADS is smaller than that of DAP resin. Moreover, from thermogravimetric analysis, the lowering of Td of the DAP resin modified with DADS is because DADS is likely to pyrolyze. © 2013 Society of Chemical Industry     

Absolute Configuration of β- and α-Asymmetric Carbons within β-O-4-Structures in Hardwood Lignin

In this study, we investigated the proportion of erythro- and threo-forms of β-O-4-ether structures and their enantiomeric compositions in hardwood lignin by applying the ozonation method to birch wood meal. Optical activity was not substantially observed in either the erythronic or threonic acids obtained as the ozonation products of β-O-4-structures in birch wood meal. The proportions of the four stereoisomeric forms {(αS,βR)-erythro, (αR,βR)-threo, (αS,βS)-threo, and (αR,βS)-erythro forms} were estimated to be 37-38%, 13-14%, 12-13%, and 36-37% based on the yields of erythronic and threonic acids, and on their optical activities. The proportions suggest that the entire components of β-O-4-ether structures in birch wood lignin have R- and S-configurations at the β-carbon in approximately the same quantities {(βR)-β-O-4-structure: (βS)-β-O-4-structure = 50–52:48–50}; i.e., that the β-ether structures are essentially racemic. This estimation implies that, during lignin biosynthesis, an equal number of enantiomeric forms of β-O-4-bonded quinone methides were formed by radical coupling reactions.     

Polarization-Insensitive Monolithic 40-Gbps SOA–MZI Wavelength Converter With Narrow Active Waveguides

A polarization-insensitive monolithic 40-Gbps semiconductor optical amplifier (SOA)-Mach-Zehnder interferometer wavelength converter has been developed. Based on the photon-electron rate equation, we optimized the dimensions of the waveguide structure to maximize the field confinement in the active layer. An InGaAsP active layer with narrow SOA waveguide effectively enables polarization-insensitive high-speed wavelength conversion. High-precision wafer processing technique enabled the fabrication of submicrometer-wide active waveguides with low current leakage. Input waveguide arrays were fabricated at intervals of 25 mum and mounted in a module with two-lens aspherical lens optics. The 40-Gbps nonreturn-to-zero wavelength conversion experiment demonstrates a clear eye opening over full C-band operation     

2R Regeneration of Time-Interleaved Multiwavelength Signals Based on Higher Order Four-Wave Mixing in a Fiber

All-optical 2R regeneration of two-wavelength time-interleaved signals is demonstrated using higher order four-wave mixing in a fiber. In this regeneration scheme, a single fiber and a pump are shared by the two channels. The results show that interchannel crosstalk can be avoided when pulses in the two channels are time separated by more than ~3 times their pulsewidth. A possible power monitoring to determine suitable time-interleaving condition is also discussed.     

Study of molecular behavior in oxidation of insulating oil using terahertz spectroscopy

The stock of aged power equipment is increasing and it is important to clarify the characteristics of deteriorated insulating oil. This paper describes a basic study of molecular behavior in the oxidation of insulating oil by terahertz spectroscopy. The oxidation of insulating oil was modeled by using various compositions of dodecane and 2‐octanol. The terahertz measurements indicated that signi?cant absorption related to hydroxyl groups (‐OH) occurred between 6 and 7 THz. The absorption band was also observed in accelerated aging alkylbenzene, which is used in power equipment as insulating oil and is sensitive to hydrogen bonds. © 2013 Wiley Periodicals, Inc. Electr Eng Jpn, 183(1): 9–15, 2013; Published online in Wiley Online Library (wileyonlinelibrary.com). DOI 10.1002/eej.22335