Sequential batch reactor for eucalypt kraft pulp effluent treatment with Trametes versicolor

BACKGROUND: A sequential batch reactor (SBR) was used for eucalypt kraft pulp effluent treatment with Trametes versicolor. A 2³ full factorial design and response surface methodology were applied to optimise the batch fermentation conditions. Effluent concentration, culture medium and inoculum age were the factors selected for this study in order to optimise the reduction of chemical oxygen demand (COD). RESULTS: The presence of Trametes Defined Medium (TDM) in the fermentation was required to obtain a significant COD reduction. Experiments in the batch reactor confirmed, in general, the predicted results of optimisation developed from Erlenmeyer batch assays. The T. versicolor culture remained active during 42 days of study in the SBR, providing approximately 80% of COD reduction. CONCLUSION: Trametes versicolor may be considered as very promising for the biological treatment of effluents from kraft pulp mills in an SBR system instead of the activated sludge mixed cultures traditionally used. Copyright © 2008 Society of Chemical Industry     

A new approach to model reference adaptive control

In classical model reference adaptive control, the goal is to design a controller to make the closed-loop system act like a prespecified reference model in the face of significant plant uncertainty. Typically, the controller consists of an identifier (or tuner) which is used to adjust the parameters of a linear time-invariant (LTI) compensator, and under suitable assumptions on the plant model uncertainty it is proven that asymptotic matching is achieved. However, the controller is typically highly nonlinear, and the closed loop system can exhibit undesirable behavior, such as large transients or a large control signal, especially if the initial parameter estimates are poor. Furthermore, its ability to tolerate time-varying parameters is typically limited. Here, we propose an alternative approach. Rather than estimating the plant or compensator parameters, instead we estimate what the control signal would be if the plant parameters and plant state were known and the "ideal LTI compensator" were applied. We end up with a linear periodic controller. Our assumptions are reasonably natural extensions of the classical ones to the time-varying setting; we allow rapid parameter variations, although we add a compactness requirement. We prove that we can obtain arbitrarily good tracking, explore the benefits and limitations of the approach, and provide a simulation study.     

A distributed adverse drug reaction detection system using intelligent agents with a fuzzy recognition‐primed decision model

Discovering unknown adverse drug reactions (ADRs) in postmarketing surveillance as early as possible is highly desirable. Nevertheless, current postmarketing surveillance methods largely rely on spontaneous reports that suffer from serious underreporting, latency, and inconsistent reporting. Thus these methods are not ideal for rapidly identifying rare ADRs. The multiagent systems paradigm is an emerging and effective approach to tackling distributed problems, especially when data sources and knowledge are geographically located in different places and coordination and collaboration are necessary for decision making. In this article, we propose an active, multiagent framework for early detection of ADRs by utilizing electronic patient data distributed across many different sources and locations. In this framework, intelligent agents assist a team of experts based on the well‐known human decision‐making model called Recognition‐Primed Decision (RPD). We generalize the RPD model to a fuzzy RPD model and utilize fuzzy logic technology to not only represent, interpret, and compute imprecise and subjective cues that are commonly encountered in the ADR problem but also to retrieve prior experiences by evaluating the extent of matching between the current situation and a past experience. We describe our preliminary multiagent system design and illustrate its potential benefits for assisting expert teams in early detection of previously unknown ADRs. © 2007 Wiley Periodicals, Inc. Int J Int Syst 22: 827–845, 2007.     

Catalytic effects during cellulose liquefaction

Cellulose can be totally liquefied by heating to 350 °C in the presence of an aqueous phenolic solvent containing a catalyst. The main products are light aromatic hydrocarbons, benzofurans, heavier aromatic hydrocarbons such as substituted indanes and tetralin, and xanthenes. The variation of product distribution with catalyst was examined and it was found that in aqueous phenol, xanthene formation was enhanced by acidity. By substituting guaiacol for phenol, it was determined that most benzofuran formation involved the phenol solvent molecules, although a small proportion did not. This benzofuran may have arises from phenol generated from cellulose, the incorporation of phenol in the products being enhanced through a cage effect.     

Fast adders using enhanced multiple-output domino logic

Using an enhanced multiple output domino logic (EMODL) implementation of a carry lookahead adder (CLA), sums of several consecutive bits can be built in one nFET tree with a single carry-in. Based on this result, a new sparse carry chain architecture is proposed for the CLA adder. We demonstrate the design approach using a 32-b adder, and show that only four carries are sufficient for generating all sums, with a consequent reduction in the number of stage delays. Using a 1.2-μm CMOS technology, we verify our simulation procedures by fabrication and measurement of a 2.7 ns critical path     

Novel NMDA antagonists: replacement of the pyridinium ring of 6,11-ethanobenzo[b]quinolizinium cations with heteroisoquinolinium cations

Replacement of the pyridinium ring of 6,11-ethanobenzo[b]quinolizinium cations with thiazolium (4a and 4b) and N-methylimidazolium (4c and 4d) resulted in equipotent compounds in the [3H]TCP binding assay. The corresponding N-methyl-1,2,4-triazolium analogs were less potent in this assay. The thiazolium derivative 4b, with a Ki = 2.9 nM, is being evaluated as a possible neuroprotective N-methyl-D-aspartic acid (NMDA) antagonist.     

Numerical experiments with the lid driven cavity flow problem

The centerline velocity profiles obtained from the solution of the two- and three-dimensional representations of the lid driven cavity flow problem are compared for different Reynolds numbers. Two configurations were used in this study: a unit cavity and a cavity with an aspect ratio of 2. The Reynolds numbers ranged from 100 to 5000 for all of the configurations studied. A new method of extending the Jacobi collocation technique called spectral difference is developed in this paper together with a unique computational grid. In addition, an iterative method for solving the pressure problem is also developed. This new numerical method allowed the calculation of three-dimensional Navier-Stokes equations to be performed in computers with very modest computational capabilities such as workstations.