求解复杂形状旋转体拉延毛坯直径的新方法--计算机作图查询法

提出了基于AutoCAD软件的确定复杂形状旋转体拉延毛坯直径的方法－计算机作图查询法，这种方法操作严谨，结果准确，比原有的3种方法简捷、快速，是一种值得推广的好方法。     

场发射显示器支撑墙机械强度的计算与分析

计算了几种不同材料支撑墙在不同承压和允许倾斜角度范围内的应力和形变分布。计算结果表明 ,采用热压氮化硅或氧化锆陶瓷制作的支撑墙具有足够高的机械强度 ,是支撑墙材料的较好选择。     

131I-epidepride的制备与SD大鼠体内分布特性研究

采用双氧水标记法和氯胺 -T法进行13 1I -epidepride标记 ,考察标记物的纯度及稳定性 ,并进行SD大鼠体内分布特性研究。实验结果表明 ,双氧水法和氯胺 -T法标记率分别为 97.4 %和 5 2 .9%。标记物的生理盐水溶液室温放置 4h ,放化纯大于 90 %。大鼠静脉注射13 1I -epide pride的生理盐水溶液后 ,纹状体与小脑比值在注射后 32 0min时高达 2 37:1。13 1I -epidepride进入血液后很快被组织摄取 ,其中以肺的早期摄取最高 (2 .11± 1.0 5 ) %ID·g- 1,各脏器的清除均较快 (T1/2 <4h) ,甲状腺的摄取率随时间的延长而增加。     

A physics-based GaAs PHEMT noise model for low drain bias operation using characteristic potential method

A new physics-based noise model of a GaAs PHEMT is developed using the characteristic potential method (CPM). The model calculates the intrinsic noise current sources using CPM. Combined with the extrinsic noise parameters extracted from the measured S-parameters, the model reproduces four noise parameters of the device accurately under low drain bias voltages without using any fitting parameters. The model is verified with a 0.2-/spl mu/m GaAs PHEMT and shows excellent agreement with the measurements for all the noise parameters up to a drain voltage of 1 V Also, the proposed method allows the simulation of the microscopic noise distribution and thus allows one to obtain a physical understanding of noise mechanisms inside the device.     

从汾河水库泥沙淤积变化看上游水保治理成效

通过汾河水库建库运行40年中年降水、年来水量、水库泥沙淤积等实测资料比较分析，指出水库在1991～2000年的10年内降水减少情况下，年来水量增加，水库淤积显著减少，说明1987年以来进行的上游水土保持治理成效显著，效益巨大。     

江西省都昌县2000年旱情的思考

通过都昌县2000年旱情及受灾情况的分析，揭示了产生这种现象的原因，并且提出了相应解决问题的对策。     

圆钢锭浇铸工艺试验

在不同锭型钢中A1含量及S含量、浇铸温度及浇铸时间等试验工艺条件下,对模铸20管钢、φ450mm、2.1t(圆波浪形)钢锭裂纹率的影响进行了分析与讨论,并确定了主要工艺参数。     

Total transfer capability computation for multi-area power systems

This paper presents a method for multi-area power system total transfer capability (TTC) computation. This computation takes into account the limits on the line flows, bus voltage magnitude, generator reactive power, voltage stability, as well as the loss of line contingencies. The multi-area TTC problem is solved by using a network decomposition approach based on REI-type network equivalents. Each area uses REI equivalents of external areas to compute its TTC via the continuation power flow (CPF). The choice and updating procedure for the continuation parameter employed by the CPF is implemented in a distributed but coordinated manner. The proposed method leads to potential gains in the computational efficiency with limited data exchanges between areas. The developed procedure is successfully applied to the three-area IEEE 118-bus test system. Numerical comparisons between the integrated and the proposed multi-area solutions are presented for validation.     

基于图像灰度统计分布的高炉温度场动态定标算法

通过高炉红外图像建立料面温度场是判断高炉煤气流分布形态的一种有效方法,温度定标是建立温度场的基本问题之一.在高炉复杂、恶劣的环境下,本文以高炉十字测温为基础,通过热电偶温度数据和图像对应区域的灰度分布统计,动态地建立温度定标关系.算法具有较好的自适应性,实际生产运行表明,温度定标关系较好地适应了高炉炉况的不确定性,准确地反映了高炉温度场的变化情况.