Surface and thermal characteristics of rubber‐modified aromatic polyamide

Polyamide/epoxysilane (coupling agent) composites were reacted with poly(dimethylsiloxane) (PDMS), a condensation product of diethoxydimethylsilane (DEDMS), by a sol–gel process. Polyamide–PDMS nanocomposites were obtained. The existence of the condensation product of DEDMS and the reaction between the epoxy group and the polyamide were confirmed with Fourier transform infrared, attenuated total reflection, and wide‐scanning X‐ray photoelectron spectroscopy. Atomic force microscopy and contact‐angle measurements showed that the surface properties of polyamide were greatly improved by the addition of PDMS. The pyrolysis temperature of polyamide with PDMS was approximately 400°C, and the pyrolysis temperature was similar to that of pure polyamide. Also, the char contents increased with the addition of PDMS. The glass‐transition temperature of polyamide with or without PDMS was approximately 140°C according to differential scanning calorimetry. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 1947–1955, 2004     

Synthesis and characterization of poly(ethyl vinyl ether) containing the NLO-phore 4′-oxy-4-nitrostilbene in the side chain

Summary 4-(2-Vinyloxyethoxy)-4-nitrostilbene 2 was prepared by the reaction of 4-hydroxy-4-nitrostilbene 1 with 2-iodoethyl vinyl ether. Monomer 2 was polymerized with cationic initiators to obtain a poly(ethyl vinyl ether) with the NLO-phore 4-oxy-4-nitrostilbene in the side chain. The resulting polymer 3 was soluble in common solvents such as chloroform and DMSO. The inherent viscosities of polymer 3 were in the range of 0.25–0.30 dL/g in chloroform. Polymer 3 showed a good thermal stability in TGA thermogram. Solution-cast films were cloudy and brittle with a T_g of 63°C.     

Concentration of tocopherols from soybean sludge by supercritical carbon dioxide

A supercritical fluid extraction method has been applied to test the feasibility of tocopherol concentration from soybean sludge with carbon dioxide at temperatures and pressures ranging from 35 to 70°C and 200 to 400 bar, respectively. The supercritical solubility of the esterified soybean sludge was over 4–6 times greater than that of the original soybean sludge. By a simple batch-type one-stage method the tocopherols in the esterified soybean sludge could be concentrated up to 40 wt%. The overall results of the present study show that soybean sludge initially containing about 13–14 wt% tocopherols may require a countercurrent multistage column to be highly and effectively concentrated.     

The effect of composition on thermal,mechanical, and morphological properties of thermotropic liquid crystalline polyester with alkyl side-group and polycarbonate blends

A thermotropic liquid crystalline polymer (LCP) with an alkyl side-group was synthesized. Blends of the LCP with polycarbonate (PC) were prepared by coprecipitatton from a common solvent. The rheological behavior of the LCP/PC blends was found to be very different from that of PC, and significant viscosity reductions were observed in the temperature range of 200–230°C. Blends of different LCP compositions were extruded with different draw ratio from a capillary rheometer. The ultimate tensile strength showed a maximum at a 10 wt% LCP composition in the blends. It decreased for compositions greater the 10 wt% LCP, whereas the initial modulus increased with increasing LCP content. The morphology of the blends was found to be affected by their compositions. Scanning electron microscopy (SEM) studies revealed finely dispersed spherical LCP domains in the PC matrix. The SEM micrographs also showed a poor adhesion between the two phases.     

Synthesis of novel bisphenol containing phthalazinone and azomethine moieties and thermal properties of cured diamine/bisphenol/DGEBA polymers

A novel bisphenol(1,2-dihydro-2-(4-((4-hydroxy)phenyliminomethylidene)phenyl)-4-(4-((4-(4-hydroxy)phenyliminomethylidene)phenoxy)phenyl)(2H)phthalazin-1-one, DPP) and a diamine(1,2-dihydro-2-(4-aminophenyl)-4-(4-(4-aminophenoxy)phenyl)(2H)phthalazin-1-one, DAP) were synthesized and characterized. The novel epoxy polymers containing phthalazinone and/or azomethine moieties were prepared by binary polymerization of DAP (or DPP) with diglycidyl ether of biphenyl A (DGEBA) and ternary polymerization of hybrid curing agents, DAP/DPP (DAP and DPP under different molar ratios) with DGEBA. The cure behaviors of these new epoxy systems were studied by dynamic differential scanning calorimeter (DSC) and Infrared (IR) scans. Especially, the activation energy of DAP/DGEBA calculated by Kissinger and Ozawa methods were 73.8 and 77.4 kJ/mol, respectively. For ternary epoxy system, it was found that hybrid curing agents of DAP/DPP exhibited significant associated effect on their reactivity towards the oxirane group. Glass transition temperatures (T_g's) of these new epoxy polymers were all above 150 °C from the results of DSC, and the initial thermal decomposition temperatures (T_d,5%'s) and integral procedure decomposition temperatures (IPDT's) of these new epoxy polymers are above 350 and 850 °C, respectively from results of thermogravimetric analyses (TGA). These results show that new epoxy polymers containing phthalazinone and/or azomethine moieties exhibited excellent thermal properties. Especially, thermal properties of the ternary epoxy polymers could be modified by changing the content of DAP and DPP. The linear relationships between char yield (Y_c,wt%) and the structural compositions of these new polymers (weight percentage of phthalazinone, azomethine and nitrogen, C/H weight ratio) were built.     

Organic-inorganic hybrid materials from a new octa(2,3-epoxypropyl)silsesquioxane with diamines

Hybrid materials based on a new polyhedral oligomeric silsesquioxane, octa(2,3-epoxypropyl)silsesquioxane (OE) with diamines of 4,4′-methylenedianiline (DDM) and 5-trifluoromethyl-1,3-phenylenediamine (FPA) were prepared and characterized. OE was synthesized from cage-structured octaallylsilsesquioxane (OA) with m-chloroperbenzoicacid. The FTIR studies suggested that the N-H bond in diamines was not completely reacted with epoxy group due to steric hindrance and also extensive hydrogen bonding existed in the hybrid materials. The retention of the cage structure in the prepared hybrid materials was suggested by the FTIR and ²⁹Si NMR studies. The OE/FPA hybrid materials had superior thermal/mechanical characteristics than the OE/DDM due to the higher rigidity of the FPA than that of DDM or the silicon-fluorine interaction enhancing crosslinking reaction or hydrogen bonding. The prepared OE/FPA had a T_g of 170 °C, which was higher than diglycidyl ether of bisphenyl A (DGEBA)/DDM at the same stoichiometric ratio. It also had excellent thermal, mechanical, and dielectric characteristics with high storage modulus of 1.8 GPa (30 °C) and 0.3 GPa (250 °C), low coefficient of thermal expansion of 86 μm/m °C, and dielectric constant of 2.19. Thus, it can be high performance materials with potential applications for electronic packaging.     

提高轻苯产率和降低洗油消耗的措施

通过对粗苯装置设备的改造和优化操作,既解决了设备能力与生产负荷不匹配的问题,又提高了轻苯收率和降低了洗油消耗。     

Effectiveness test of alginate‐derived polymeric surfactants

A series of alginate‐derived polymeric surfactants (APSs) with a linear alkyl group (C8, C12, C16) was synthesized by oxidation followed by reductive amination of 2,3‐dialdehydic alginate. The products were characterized by measuring IR spectra, NMR spectra, surface tension and critical micelle concentration (cmc). They were also tested for the solubilization of azobenzene and adsorption of heavy metal. In the case of 40% CHO‐C8 APSs, the lowest interfacial tension value (31.5 m Nm^?1) was obtained at the cmc value of 1.35 g dm^?3. The dissolving capacity of 40% CHO‐C8 APS towards azobenzene was 27 times greater than that of alginate. The overall cobalt (Co²⁺) removal efficiency by adsorption using APSs was high compared with that of sodium alginate at pH 3, 5 and 7. Equilibrium aspects of cobalt adsorption onto 10% CHO‐APSs were studied, and the results show that APSs had high equilibrium capacities for cobalt uptake, 115.5 mgg^?1. © 2002 Society of Chemical Industry     

Cure kinetics of high performance epoxy resin systems

Summary Isothermal cure kinetics ofEPON HPT 1071/DDS system have been performed by means of differential scanning calorimetry. The maximum cure rate and the extent of conversion at various DDS concentrations were studied as a function of cure temperature. Maximum cure rate increases with increasing cure temperature and DDS concentration. At various DDS concentrations, the maximum cure rate occured between 19–22% conversion. In order to evaluate the kinetic parameters, numerical calculations by means of a Newton-Raphson technique and experimental results obtained from the peak of reaction rate curve were undertaken.     

基于CUDA的并行粒子群优化算法研究及实现

应用图形处理器(GPU)来加速粒子群优化(PSO)算法并行计算时,为突出其加速性能,经常有文献以恶化CPU端PSO算法性能为代价。为了科学比较GPU-PSO算法和CPU-PSO算法的性能,提出用"有效加速比"作为算法的性能指标。文中给出的评价方法不需要CPU和GPU端粒子数相同,将GPU并行算法与最优CPU串行算法的性能作比较,以加速收敛到目标精度为准则,在统一计算设备架构(CUDA)下对多个基准测试函数进行了数值仿真实验。结果表明,在GPU上大幅增加粒子数能够加速PSO算法收敛到目标精度,与CPU-PSO相比,获得了10倍以上的"有效加速比"。