长江藕池口水道平面二维水沙数学模型研究

针对三峡水库蓄水以后,藕池口水道滩槽格局稳定性下降,航道条件持续恶化的情况,开展了水道演变相关研究工作。模拟并预测了这一典型弯曲分汊河段在新水沙条件下的演变趋势。研究结果表明,三峡水库蓄水以后,该水道倒口窑心滩从生成到并岸的周期性演变规律并未发生本质性变化,且该区域可能在倒口窑心滩并岸之后发育新的心滩;航宽有不断变窄的趋势,建议及早展开系统治理,以保证该航道稳定的通航条件。     

Skeleton pruning as trade-off between skeleton simplicity and reconstruction error

The position and orientation of moving platform mainly depends on global positioning system and inertial navigation system in the field of low-altitude surveying, mapping and remote sensing and land-based mobile mapping system. However, GPS signal is unavailable in the application of deep space exploration and indoor robot control. In such circumstances, image-based methods are very important for self-position and orientation of moving platform. Therefore, this paper firstly introduces state of the art development of the image-based self-position and orientation method (ISPOM) for moving platform from the following aspects: 1) A comparison among major image-based methods (i.e., visual odometry, structure from motion, simultaneous localization and mapping) for position and orientation; 2) types of moving platform; 3) integration schemes of image sensor with other sensors; 4) calculation methodology and quantity of image sensors. Then, the paper proposes a new scheme of ISPOM for mobile robot — depending merely on image sensors. It takes the advantages of both monocular vision and stereo vision, and estimates the relative position and orientation of moving platform with high precision and high frequency. In a word, ISPOM will gradually speed from research to application, as well as play a vital role in deep space exploration and indoor robot control.     

云计算中的数据安全存储和加密模型的设计

随着时代的快速发展,网络技术也正在进行着新的变革,现阶段最受到人们关注的热点无疑就是云计算,它已经成为计算机领域中最新兴的研究重点。然而,云计算中的安全问题已经成为制约云计算快速发展和推广的关键问题,如何快速、安全地存储和传输生成于云环境中的大量数据,也已成为新的研究重点。文中在分析云计算中数据不安全因素的基础上,通过对云端数据进行合理加密的技术手段,实现了一种有效的安全数据存储和加密的服务模型,达到了对云环境中的数据进行安全的数据存储和备份。     

基于双目视觉的机器人目标定位与机械臂控制

为了更好地与复杂多变的非结构化环境进行交互,完成对目标物体的识别和抓取,提出了一种应用于服务机器人平台的基于双目视觉的仿人机械臂控制方法.文中首先用D-H方法对机械臂进行建模,并对这个模型做了改进,给出了一种更加简便的3+1自由度仿人机械臂的逆解算法,采用基于双目视觉与颜色分割的目标识别方法;然后根据识别出的目标三维坐标信息控制机械臂完成抓取任务;最后,本方法在家庭服务机器人上得到了验证,机器人能够完成对目标物体的识别和抓取动作.     

高压变频器在100t转炉一次除尘主风机中的应用

介绍荣信RHVC高压变频器的工作特点、性能及在转炉一次除尘主风机中的改造和应用情况.     

Improved concentration and separation of particles in a 3D dielectrophoretic chip integrating focusing, aligning and trapping

This article presents a dielectrophoresis (DEP)-based microfluidic device with the three-dimensional (3D) microelectrode configuration for concentrating and separating particles in a continuous throughflow. The 3D electrode structure, where microelectrode array are patterned on both the top and bottom surfaces of the microchannel, is composed of three units: focusing, aligning and trapping. As particles flowing through the microfluidic channel, they are firstly focused and aligned by the funnel-shaped and parallel electrode array, respectively, before being captured at the trapping unit due to negative DEP force. For a mixture of two particle populations of different sizes or dielectric properties, with a careful selection of suspending medium and applied field, the population exhibits stronger negative DEP manipulated by the microelectrode array and, therefore, separated from the other population which is easily carried away toward the outlet due to hydrodynamic force. The functionality of the proposed microdevice was verified by concentrating different-sized polystyrene (PS) microparticles and yeast cells dynamically flowing in the microchannel. Moreover, separation based on size and dielectric properties was achieved by sorting PS microparticles, and isolating 5 μm PS particles from yeast cells, respectively. The performance of the proposed micro-concentrator and separator was also studied, including the threshold voltage at which particles begin to be trapped, variation of cell-trapping efficiency with respect to the applied voltage and flow rate, and the efficiency of separation experiments. The proposed microdevice has various advantages, including multi-functionality, improved manipulation efficiency and throughput, easy fabrication and operation, etc., which shows a great potential for biological, chemical and medical applications.     

A novel method to construct 3D electrodes at the sidewall of microfluidic channel

We report a simple, low-cost and novel method for constructing three-dimensional (3D) microelectrodes in microfluidic system by utilizing low melting point metal alloy. Three-dimensional electrodes have unique properties in application of cell lysis, electro-osmosis, electroporation and dielectrophoresis. The fabrication process involves conventional photolithography and sputtering techniques to fabricate planar electrodes, positioning bismuth (Bi) alloy microspheres at the sidewall of PDMS channel, plasma bonding and low temperature annealing to improve electrical connection between metal microspheres and planar electrodes. Compared to other fabrication methods for 3D electrodes, the presented one does not require rigorous experimental conditions, cumbersome processes and expensive equipments. Numerical analysis on electric field distribution with different electrode configurations was presented to verify the unique field distribution of arc-shaped electrodes. The application of 3D electrode configuration with high-conductive alloy microspheres was confirmed by particle manipulation based on dielectrophoresis. The proposed technique offers alternatives to construct 3D electrodes from 2D electrodes. More importantly, the simplicity of the fabrication process provides easy ways to fabricate electrodes fast with arc-shaped geometry at the sidewall of microchannel.     

杆塔倾角监测与报警系统的设计

分析杆塔的环境条件对杆塔倾角监测与报警系统提出的要求,采用太阳能电池板和蓄电池联合供电的方式,设计具有定时唤醒机制的两级MCU控制的集散控制中心,一级MCU以中断方式接收加速度计传感器采集的数据,二级MCU将数据转换成RS-485传输方式,经过光纤转换模块以光缆传输到指挥控制中心,实现了信息的可靠获取及传输;该系统体积小、成本低、微功耗、可靠性高、可维护性强,可用于各种环境的倾角指示和测量。     

Self-sensing active magnetic bearing using real-time duty cycle

In a self-sensing active magnetic bearing (AMB) system driven by pulse width modulation (PWM) switching power amplifiers, the rotor position information can be extracted from coil current and voltage signals by a specific signal demodulation process. In this study, to reduce the complexity of hardware, the coil voltage signal was not filtered but measured in the form of a duty cycle by the eCAP port of DSP (TMS320F28335). A mathematical model was established to provide the relationship between rotor position, current ripple, and duty cycle. Theoretical analysis of the amplitude-frequency characteristic of the coil current at the switching frequency was presented using Fourier series, Jacobi-Anger identity, and Bessel function. Experimental results showed that the time-varying duty cycle causes infinite side frequencies around the switching frequency. The side frequency interval depends on the varying frequency of the duty cycle. Rotor position can be calculated by measuring the duty cycle and demodulating the coil current ripple. With this self-sensing strategy, the rotor system supported by AMBs can steadily rotate at a speed of 3000 r/min.     

吐鲁番地区坎儿井保护加固工程方案

新疆吐鲁番地区现有坎儿井1091条,有水坎儿井404条,总长度为3488.5km,年径流量2.32×108m3。从坎儿井在农业灌溉和人畜供水的作用来看,充分显示出它作为"沙漠生命之泉"的深刻含义。本文就吐鲁番地区坎儿井保护加固方案,进行阐述,供水利工程界同行进行讨论。